In Industrial Applications guar gum powder is a very versatile product and finds its different applications, as thickening, sizing agent, wet-end strength additive, gelling agent and water barrier, flocculation aid, for waste water treatment, as emulsifier, binder. Also used for mud formulations, enhanced oil recovery, polymer flooding, well treatment, lost circulation plugging etc. Mining grade guar gum is used in mining industry as a floatation agent flocculating or setting better quality agent. Fast hydration guar gum powder for oil drilling applications is an important advantage of guar gum. Altrafine Gums in India supply oil drilling grade guar gum, guar gum for paper industry, guar gum as an emulsifying, guaran and sickle pod.
Roasted Guar Korma has been developed as a product free of antinutritive factors with balanced Amino Acid Profile. Suitable for Poultry, Swine, Ruminant and Aquaculture. Processed with heat and steam, inactivates harmful trypsin inhibitor which indirectly enhances protein and Amino acids digestibility in the product resulting in increased productivity of livestock and poultry. This process also reduces gummy substance by hydrolysing glactomannan and heat breaks cell walls resulting in higher digestibility of Guar Korma. The anti-nutritive trypsin inhibitor is present in both Soybean and Guar seed, but gets inactive when processed into Soybean meal and Guar meal respectively. We have two qualities of Roasted Guar Korma namely ULTRA and PREMIUM In Roasted Guar Korma ULTRA, the minimum protein content is 48 % and in Roasted Guar Korma PREMIUM, the minimum protein content is 55 %. The other nutritional and Amino Acid values of ULTRA and PREMIUM Roasted Guar Korma are listed below:- • Higher percentage of Crude Protein (CP) • Free From Aflatoxins • Higher Digestibility Index, due to the removal of anti-nutritive factors • More desirable and balanced Amino acid Profile • Higher Energy content and fat percentage • Lower percentage of less digestible Fibre • Higher Palatability, complete elimination of characteristic bean odour and taste. • Low content of Total Volatile Nitrogen (TVN) • Free flowing, uniform fine particle size with good fat and water binding ability NUTRITIONAL VALUES ULTRA PREMIUM Protein 48% – 50% 55% – 60% Metabolize Energy 2550 KCal/Kg 2700 KCal/Kg Moisture Less Than 8% Less Than 6% Fiber 6% – 8% 4% – 5% Fat 5.00% 5.00% Ash/ Sand Silica Less Than 2% Less Than 1% Calcium 0.55% 0.55% Phosphorus 0.68% 0.68% Available Phosphorus 0.19% 0.19% Urease Activity Less Than 1% Less Than 1% Pepsin Digestibility 85.00% 85.00% Trypsin Inhibitor Less Than 1 Less Than 1 Aflatoxins NIL NIL Salmonella NIL NIL E.Coli NIL NIL
About THE Product : Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement). Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications. Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties. Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste. Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water. Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium. GBFS : (Granulated Blast Furnace Slag) Source : Granulated BF Slag From Gujarat State, India Supply Quantity : 50,000 Metric Tons Per Month Packing: Bulk Parameters (% BY MASS) CaO 30-38 Al2O3 15-20 SiO2 30-40 Glass Content 85-97 MgO 8-11 Fe2O3 0.5-1.5 Moisture 10 MAX Size -5mm Min 95, +5 mm Max 5 Relative Gravity 2.9 Bulk Density(Bagged) 1200 KG/M3
We are supplier and exporter of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.
We are exporter of Activated Carbon. Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
Tapioca pregelatinized starch offered by us has specific properties such as high viscosity, good color carrier properties and absence of foreign odors. It is often used as an adhesive in paper and corrugation industry, Sizing and finishing agent in textile and as a fluid loss control additive in oil well drilling. Applications / Advantages: 1) Our made tapioca pregelatinized starch finds much favor in adhesive industry because of high viscosity and appreciable binding capacity. 2) Tapioca pregelatinized starch is extensively used in animal feed and fish feed industry as binding agent or expanding agent. 3) It is also widely used in textile for sizing of yarns and finishing of cotton and polyester fabrics. 4) Tapioca based pregelatinized starch is used as a wet end additive to the pulp in the paper industries. 5) It is used as binder in manufacturing mosquito coil, incense stick, dhoop and cone to replace the expensive gum
We are supplier and exporter of Hematite Powder. Hematite Powder is a mineral, coloured black to steel. It is mined as a main of iron ore and used as a weighting agent in oil drilling. It is the mineral form of iron(III) oxide (Fe2O3). Fluids weighted with API Hematite Powder contain fewer solids by volume than, making higher mud fluids possible. API Grade Hematite Powder is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It is used as a density increasing product, used as a weighting agent and in the paint industry. Hematite is also a harder mineral than Barite so it is more resistant to particle size degradation. High Density Hematite Powder API Grade -SG = 5.19 - 5.47 -Fe2O3 = 96.70% -Fe = 71.82% -SiO2 = 0.89% -Mesh Size (passing at 98%) = 325
We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS 1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes. 2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to the pasteurized milk and stir slowly to ensure full dissolving at 80C. 3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the temperature at 70�° C. 4. Keep Slow stirring for complete separation of solids and whey. (Indication: Whey will turn to light green color and small lumps of solids will settle down) 5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer. 6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop. 7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then dip in chilled water for 4 hours. DOSAGE Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need to be used.
DESCRIPTION : Anti Dust Disposable Face Mark KN95 5Ply Face Mask (With Valve) Name: KN95 earloop face mask material: non-woven, soft cotton, melt blown filter TOTAL 5 LAYER Color:White Size:12.5*10.5cm function:daily protection of PM2.5, micro particles, droplets, epidemics, etc Certification:CE and FDA Model No : KN95 Valve . Quantity Pcs ; 3 Packing details : 25pcs per box, 60boxes/ctn,1,500pcs/ctn, G.W.:13.5kgs,carton size:52*43.5*57cm
Vegetable fruit drying machine,heat way : electric ,gas ,oil Biomass particles, for client choice . Customized with different length of drying oven machine . This drying machine has small size ,big size according to client inquired manufacture, also can drying flower,meat ,sea food ,herb-medicine, and so on . welcome cooperate !
KODOMO Baby Wet Wipes are wet wipes with soft extract ingredients that can clean effectively and maintain moisture and softness of baby's skin so they are safe to use on baby's skin. With an alcohol-free formula. paraben free, and perfume free. Available in 3 variants : - Classic Blue - Rice Milk - Anti Bacterial Size : -72 x 10 sheets -24 x 50 sheets
Kaolin also called as China Clay is nearly white in colour. It is distinguished from other industrial clays based on its fine particle size and pure colourings. Its ability to disperse in water makes it an ideal pigment. The primary constituent in kaolin is the mineral kaolinite, a hydrous aluminum silicate formed by the decomposition of minerals such as feldspar. Hydrous kaolin is characterized by its fine particle size, plate like or lamellar particle shape and chemical inertness. APPLICATIONS aints, Coating & Pigments Pharmaceuticals, Cosmetics and Medical Applications Plastics Rubber Ceramics Fibreglass Ultramarine industries Since several years CEMENTATION has been mining, processing and supplying Kaolin products from its reserves in India. Our products offer unique and specific geological characteristics that can be tailor-made to meet the changing demands of the markets that we serve. Our production or supply capacity is more than 150,000 TPA. Our laboratories are well equipped to meet the needs of the diverse markets we serve.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
We are suppliers of BEST QUALITY Belgium Tubular Chip Board and looking for serious buyers in need of our products, contact with us for more details. 2135*800*33mm Hollow Door Core Particle Board. Product name: Hollow door core particle board Size:2135*800mm Thickness:33mm,38mm Material:Pine Density:350-400kgs/cbm Grade:E1 Package:14 pallets/40'HQ,1022pcs/40'HQ Minimum order: One 40'HQ
Molecular Formula: Na2O SiO3 Cas No.: 6834-92-0 Appearance : white, uniform, beaded. Characteristics: This product possesses high alkaline and defoul character, which is easy to soluble in water, good dispersibility and emulsifiability, not soluble in alcohol. Na2O - 28.0-30.0% SiO2 - 27.3-29.2% Whiteness - 80% Min Fe - 100ppm Max Bulk density - 0.80-0.97g/cc Particle Size(14-60mesh) - 90% Min