1.The applications of FY300 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling, ·drilling with large diameter and deep drilling footage ·Its fast, flexible and efficient 2.The specifications of FY300 crawler pneumatic water well drilling rig Model FY300 Gross weight t 8.8 Dimension mm 4350*1850*2750 Aperture mm 140-325 Drilling depth m 300 Feed stroke mm 6000 Travel speed km/h 2 Grade ability max. 30° Rising height from ground mm 230 Wind pressure mpa 1.7-3.3 Air consumption m³/min 23 Engine power kw 85 Rotary speed rpm 55-115 Rotation torque n.m 7200-8500
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.Brief introductions of SJD-2A portable electric water well drilling rig electric water well drilling rig are widely used in household/factory water wells, irrigation Wells, installation of water air conditioning, construction piling and so on. The electric water well drilling rig bit produced by the company can be optionally equipped with drill bit, the price of drill bit is calculated separately.It can also be equipped with a drill pipe, with a diameter of 32mm and the length about 1.8m. 2.Features of SJD-2A portable electric water well drilling rig The whole machine is about 8KG, and it is easy to carry.Power 220V electric ,household two-phase electrical lighting, motor power 1200W or 1500W.The motor can be multi-stage variable speed, positive and negative, and easy to operate.The well drilling depth can reach 50 meters, the wellhead diameter is 50-180mm, the general drill bit 50-180mm, the special specification can be customized.The diameter of the drill pipe is 32mm or 42mm and a length is 1m to 2m.
1.The features of SPJ-400 water well drilling rig ·SPJ-400 water well drilling rig is powered by diesel engine, and can also be driven by motor in electric power area. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usageis: the hydrogeological conditions at the bottom of the exploration and survey; the drilling and drilling for the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate. Use winch system to realized ecompression drilling, lifting drilling,down pipe, impact sampling, vertical drilling tower. 2.The specifications of SPJ-400 water well drilling rig Borehole diameter 500mm-1800mm Drilling depth 400m Maximum output torque 18kn.m Active drill rod 108*108*12mm Drilling pipe 89mm Main indlasslifting power 30kn Assistant windlasslifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min height of the drilling tower 13m Gross weight (excluding drill pipe) 9t External dimension 2200*6000*13000mm Drilling tower type A / hydraulic drilling tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on.
Description: 1. SLY500 truck mounted water well drilling rig is designed by our engineers.It is a kind of truck mounted and rotary drilling rig. 2. This rig is a rotary drilling rig with directional circulation,which is equipped with mud pump,It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit. 3. The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients.
1.The applications of FY400 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling ·drilling with large diameter and deep drilling footage ·Its fast, flexible and efficient 2. The specifications of FY400 crawler pneumatic water well drilling rig Model FY400 Gross weight T 8.7 Dimension mm 5050*2100*2800 Aperture mm 140-325 Drilling depth m 400 Feed stroke mm 6000 Travel speed km/h 2.5 Grade ability max. 30° Rising height from ground mm 250 Wind pressure mpa 1.7-3.5 Air consumption m³/min 17-35 Engine power kw 95 Rotary speed rpm 45-75 Rotation torque n.m 8500-10000
1.The brief inPneumatic Water Well Drilling Rigtroductions of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has many advantages, such as large diameter, deep drilling, fast footage, flexible movement and wide application area. 2.The specifications of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig Borehole diameter mm 100-254 Borehole depth m 200 Drilling angle ° 45-90 One-time feed stroke mm 1500 Motor power kw 11 Diesel engine power hp 8.5 Rotating speed of drilling tools rpm 52 Air pressure mpa 1.45-2.5 Air consumption l/min 15-27 Total weight kg 650
1.The applications of FY300 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling, ·drilling with large diameter and deep drilling footage ·Its fast, flexible and efficient 2.The specifications of FY300 crawler pneumatic water well drilling rig Model FY300 Gross weight t 8.8 Dimension mm 4350*1850*2750 Aperture mm 140-325 Drilling depth m 300 Feed stroke mm 6000 Travel speed km/h 2 Grade ability max. 30° Rising height from ground mm 230 Wind pressure mpa 1.7-3.3 Air consumption m³/min 23 Engine power kw 85 Rotary speed rpm 55-115 Rotation torque n.m 7200-8500
1.The brief introductions of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has many advantages, such as large diameter, deep drilling, fast footage, flexible movement and wide application area. 2.The specifications of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig Borehole diameter mm 100-254 Borehole depth m 200 Drilling angle ° 45-90 One-time feed stroke mm 1500 Motor power kw 11 Diesel engine power hp 8.5 Rotating speed of drilling tools rpm 52 Air pressure mpa 1.45-2.5 Air consumption l/min 15-27 Total weight kg 650
1.The applications of FY600 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling ·drilling with large diameter and deep drilling footage ·fast, flexible and efficient 2.The specifications of FY600 crawler pneumatic water well drilling rig Model FY600 Gross weight T 12 Dimension mm 5400*2100*2850 Aperture mm 140-350 Drilling depth m 600 Feed stroke mm 6600 Travel speed km/h 2.5 Grade ability max. 30° Rising height from ground mm 250 Wind pressure mpa 1.7-3.5 Air consumption m³/min 17-35 Engine power kw 115 Rotation speed rpm 45-110 Rotation torque n.m 8500-10050
1.The applications of FY400 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling ·drilling with large diameter and deep drilling footage ·Its fast, flexible and efficient 2. The specifications of FY400 crawler pneumatic water well drilling rig Model FY400 Gross weight T 8.7 Dimension mm 5050*2100*2800 Aperture mm 140-325 Drilling depth m 400 Feed stroke mm 6000 Travel speed km/h 2.5 Grade ability max. 30° Rising height from ground mm 250 Wind pressure mpa 1.7-3.5 Air consumption m³/min 17-35 Engine power kw 95 Rotary speed rpm 45-75 Rotation torque n.m 8500-10000
1.The applications of FY260 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling, ·drilling with large diameter ·deep drilling footage ·fast, flexible and efficient. 2.The specifications of FY260 crawler pneumatic water well drilling rig Model FY260 Gross weight t 6.2 External dimension mm 3900*1950*2550 Aperture mm 140-325 Drilling depth m 260 Feed stroke mm 3000 Travel speed km/h 2.5 Grade ability max. 30° Rising height from ground mm 250 Wind pressure mpa 1.7-3.0 Air consumption m³/min 17-35 Engine power kw 85 Rotary speed rpm 40-70 Rotation torque n.m 7000-9000
We are the leading manufacturers of Self Propelled Waterwell Drilling Rig. Technical Specification : Drill Hole Diameter : Dia 5 1/2"-6 1/2" Depth : 150 Meters Carrier : Self-Driven Trolley Air Compressor : 600 cfm @ 200psi Mud Pump : 500 lpm @ 10 Bar Application : Water Well Optional : Blast hole/Earthing holes/Pilling.
Model 180 Weight(Kg) 4500 Dimensions(mm) 2700Ã?1550Ã?2350 Traveling speed(Km/h) 0~2.5 Engine model YC4D08 Power 58Kw/2400rpm Climb capacity(°) 20 Drilling depth(m) 180 Working pressure(MPa) 1.05-2.46 Air consumption(m3/min) 16-30 Length of rod(mm) 2000 Drill bit diameter(mm) Ï?110-202 Feed cylinder stroke(mm) 400 Feed power(N) 25000 Lift power(N) 50000 Speed of rotator(rpm) Min.speed 33 Max.speed 67 Lifting speed(m/min) Min.speed 8 Max.speed 26 Forcing speed(m/min) Min.speed 0-15 Max.speed 51 Rotation torque(N·m) 4200
1.Features of XY-130 hydraulic water well drilling rig ·Hoist installation holder, forming structure of double support wheel, can withstand strong impact. ·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. ·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required. ·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission 2.Specifications of XY-130 hydraulic water well drilling rig XY-130 hydraulic water well drilling rig Drilling depth 130m Maximum open hole caliber 220mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90 Drill weight (Not include power) 600kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Tightrope caliber 27m Mud pump Type Horizontal single urn twin-action Electric motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm Matched driving power (diesel engine and motor) 18hp diesel engine and 11kw motor
1. Applications of XY-200 hydraulic water well drilling rig Wells, geological survey, geophysical exploration, road and high-rise building foundation exploration, blasting holes and other drilling projects. 1.Parameters of XY-200 hydraulic water well drilling rig Maximum opening diameter 400mm Maximum borehole depth 200m Diameter of the end hole 75mm Borehole dip angle 90-75° Machine overall size 2.75*0.95*1.60m Drill pipe diameter 50mm Weight of drill rig diameter of drill pipe (without power) 760kg A vertical scroll of painting Shaft rotation speed 71/142/310/20r/min Vertical axis stroke 450mm Windlass Maximum lifting weight of single rope 2008kb Drum lifting speed 17/35/75/160 rm/s Wire rope diameter: 13mm Wire rope capacity 35mm Width of sluice 70mm Mud pump Type: horizontal single cylinder double action flowï¼?180L/min Maximum pressure 1.5mpa Working pressure 0.7mpa Inlet size 50mm Outlet pipe diameter 45mm Power Diesel oil 22hp Rated speed 2200r/min Electric machinery 15kw Rated speed 1460r/min
1. Characteristics of XY-44A hydraulic water well drilling rig XY-44A is a water well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster water well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XY-44A hydraulic water well drilling rig ·water well drilling, ·engineering geology exploration, ·hydrology and water well drilling ·large diameter foundation piles construction 3.Parameters of XY-44A hydraulic water well drilling rig XY-44A hydraulic water well drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-1 81KW Electric motor Y225S-4 37KW
1.Applications of HZ-130Y hydraulic water well drilling rig ·civil water well ·geological survey and exploration ·basic exploration for roads ·high-rise buildings ·inspection holes for various concrete structures ·river embankments ·grouting holes ·direct grouting, ·ground temperature central air conditioners. 2.Features of HZ-130Y hydraulic water well drilling rig ·Hoist installation holder, forming structure of double support wheel, can withstand strong impact. ·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. ·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required. ·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission 3.Specifications of HZ-130Y hydraulic water well drilling rig HZ-130Y hydraulic water well drilling rig Drilling depth 130m Maximum open hole caliber 220mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90-75° Drill weight (Not include power) 750kg Spindle Spindle speed 142ã??285ã??570r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Tightrope caliber 27m Mud pump Type Horizontal single urn twin-action Electric motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.The features of SPJ-600 water well drilling rig SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers. The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted. 2.The specifications of SPJ-600 water well drilling rig Drilling depth 600m Borehole diameter 500mm-2500mm Rotary table latus rectum 605mm Active drillingpipe 108*108*12mm Drilling pipe 89mm Rotary speed 42/75/134kn.m Main windlass single rope lifting power 35kn hook rated load 210kn hook lifting speed 0.15-0.47m/s pulley block model 3*3 wire-rope diameter 20-21.5mm Assistant windlass single rope rated lifting power 15kn maximum lifting power of a single rope 20kn single rope rated lifting speed 0.58m/s wire-rope diameter 9.8mm Windlass power 37kw Gross weight (excluding drillingpipe) 11t
