Wanted : Twin Wall Polycarbonate Sheet Suppliers and Manufacturers

We are interested to supply 200 tons of Mixed Color LDPE Film Scrap in bales on a monthly basis. We wish to make a long term scrap business deal with the reliable LDPE Film Scrap buyers from all over the world. Materials : LDPE Place of Origin : JAPAN, US, EUROPE Color : Mix color Application : Film Bag and Pipe Grade : Film Type : Post Industrial Waste Quality : Clean and 2-3% shortage Form : Film Unit : Ton/Tons FOB Price : $200.00 - $300.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Price Term: FOB Port of shipment: Sendai Port Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales

We are ready to supply 200 tons of White PVC Regrind on a regular monthly basis. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : White Application : Sheet, Board, Box, Packaging, Water Fitting Grade : Injection K55-57 Type : Post Industrial Waste Quality : Clean and less than 1% shortage Form : Regrind Unit : Ton/Tons FOB Price : $500.00 - $700.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag

Cane Webbing is used for furniture that has a groove around the opening. It is also used for cabinet doors, speaker fronts and to provide ventilation for appliances. To determine how much you will need, measure from groove to groove (front to back and side to side) and add 1" to each measurement Authentic Indonesian rattan, natural cane woven screen, furniture, chair, table, ceiling, background, wall material Size: You can choose the size you want. If you don't have the size you want, please contact us. Material: natural Indonesian rattan Other sizes available: width 45 cm, 55 cm, 65 cm, 70cm, 75cm, 80 cm, 85cm, 90cm, 95cm, 100cm

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

JHG is professionally offering all various of high quality laminated glass: 1) PVB laminated glass Colour includes clear/milk/bronze/grey/blue/green/black PVB film thickness is 0.38/0.76/1.14mm or thicker Both standard size and customized sizes available 2)Sentryglass Plus(SGP)laminated glass SGP bring more safe,more transparent for construction ,the film includes 0.89/1.52/2.28mm and thicker mainly used for glass floor,glass step,glass fin,curtain wall Max size is 18000mm length 3)EVA laminated glass It can be laminated with large range of inserts including PET film,polycarbonates,wood veneer,metal,paper ,stones,screeen mesh ,and so on ,it will bring mulrirusinous choice for inner decoration.

What is PMMA plastic PMMA resin is also known as acrylic resin, organic glass or glass acrylic. Although not glass, in terms of technical surface, PMMA is quite similar to glass. PMMA is often used in the form of sheets and pieces with good impact resistance, high scratch resistance, and good light exposure. As a good economic alternative to glass, glass, Polycarbonate due to its low cost, it is suitable for projects that require good bearing capacity, difficult to break without high hardness MATERIAL:PMMA plastic repro pellet transparent yellowish CATEGORY: PMMA TYPE: repro pellet GRADE: Transparent Yellowish SPECIFICATION: Repro from film. Color tone is due to UVA additives Origin: Japan LOADING WEIGHT: 24 Ton FOB (USD/Ton): 1450$ - 1700$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

Different kinds of sheet/float glass from 1.1-25mm is in high quality ,which is suitable as material for window,door,curtain wall, mirror,home appliance ,furniture. the colour includes : clear float ,extra clear float glass euro bronze,golden bronze float glass euro grey ,dark grey float glass ford blue ,dark blue float glass F green ,dark green float glass black float glass all colour reflective glass

We are capable of supplying 200 tons of Clear and Soft PVC Roll Scrap on a monthly basis. Place of Origin : JAPAN, US, EUROPE Materials : Polyvinyl Chloride [PVC] Color : Transparent Application : Sheet, Board, Bag, Packaging, Floor, Wall... Grade : Flexible Type : Post Industrial Waste Quality : Clean and less than 3% shortage Form : Roll, Sheet Unit : Ton/Tons FOB Price : $600.00 - $800.00 Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales Interested PVC Roll Scrap buyers, please do contact us with the details of your scrap requirement and your preferred terms of payment. Hope to hear from you soon.

Acid etched glass is annealed glass treated with acid to give its surface a frosted look. Entire sheets of glass can be acid etched, or small sections can be treated to add specific designs. It make glass artistic, beautiful and long lasting. Normal acid etched glass can be used to create doors, partitions, walls, shelves, and railings, special items can be used as â??anti-glare glassâ?? for picture frame, screen, etc. Product items :� single side acid etched glass / double side acid etched glass Thickness :2-19mm Size :2440x3660mm 2140x3300mm,1830x2440mm,1220x1830mm, any cut sizes

JH acid etched glass is annealed glass treated with acid to give its surface a frosted look.Entire sheets of glass can be acid etched,or small sections can be treated to add specific designs. It make glass artistic ,beautiful and long lasting .Normal acid etched glass can be used to create doors,partitions,walls,shelves,and railings, special items can be used as �?�¢??anti-glare glass�?�¢?? for picture frame , screen ,etc. Product items : single side acid etched glass / double side acid etched glass Thickness :2-19mm Size :2440x3660mm 2140x3300mm,1830x2440mm,1220x1830mm , cut sizes

Decorative Aluminum Sheets

Mild Steel (MS) Sheet

Aluminum (AL) Sheet