Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 â??) and heavy diesel (with a boiling point range of about 350-410 â??). Widely used in large vehicles, railway locomotives, and ships. The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia
DIESEL EN590 10PPM,,, Dip and Pay as FOB as Ship To Ship only, from Benghazi, Libya, Only for RWA Buyers.. Price: $0.59 / Liter as Dip and Pay .. Quantity per Vessel is from 10,000 - 30,000 MT / Vessel... Procedures is very simple, easy and clear: ICPO --> Seller send CI to Buyer to sign ---> Buyer makes Block Fund in Dubai against CI ---> Dip test and Injection of product ---> Payment... Please contacting through RWA buyers only.
Product Description - Used globally as a refined diesel oil, having very low sulphur content. Price of product is offered on CIF MED Prices, with deliveries to European ports, buyer's LOI is required, 100% genuine supply from UAE. All fuel offers that we sell are 100% genuine offers, only send us enquiries from 100% genuine buyers who can provide an LOI, and if NO LOI can be sent/available, please do not contact us! As we are only interested in talking to real genuine buyers who are Ready Willing and Able to proceed, who want to secure real product from a genuine seller at real market discounted prices! Product origin - UAE fuel Non - Sanctioned Fuels. Key Specifications/Special Features - Ultra Low Sulphur Diesel 10 ppm & 50 ppm Minimum Order Size and Packaging details - First initial trial shipment of 50,000 MT, 12 month contract, after 1st successful shipment, 200,000 MT to 300,000 MT per month is possible negotiated directly between buyer and seller. SORRY, NO SPOT CONTRACTS ARE ACCEPTED.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
L/C ,DLC, SBLC payment is accepted, NO upfront, pre-payment. Minimum Order Quantity is 100k/mt if spot. We are one of the most precise on non-sanctioned supply due to strict requests of our clients. We are in direct colloboration with reputable sellers,resellers,retailers,manufacturers and also well known refineries within our portfolio. Both as buyer and seller according to the necessarities in our partnerships.
EN590 10 ppm diesel available FOB Singapore & Fujairah, Transaction terms are Tank To Tank, Tank To Vessel or Vessel To Vessel, very competitive prices.
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM and 50 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB
(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)
We supply Jet A1 Fuel, Diesel EN590, Unleaded Gasoline and Fuel Oil... GERMAN ORIGIN, not re-documented.... Prices: Platts minus 7.5% ... We can supply as CIF, STS and Vessel Take Over. The Seller is a Title Holder.. SBLC MT760 is accepted as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER (not to a fiduciary).. We're looking for RWA buyers... MOQ is 50,000 MT for EN590, FUEL OIL, and Gasoline, and 2M bbl for Jet A1 Fuel .... Contact: Usama
DIESEL FUEL OIL D6 Minimum Quantity : 25,000,000 Gallon Maximum Qty 50,000,000 Gallon FOB Price : $2.00 USD / Gallon CIF Price : $3.00 USD / Gallon Commission : $1 USD Seller side, $1 USD Buyer side Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of the seller. Products Origin: KAZAKHSTAN. Contract Term: 12 Months minimum after first successful trial (with rolls and extensions). PORT OF LOADING: JURONG PORT, SINGAPORE, AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON PORT. Contact us for detail procedure of CIF/FOB/TTV/TTO.