Wanted : Diesel En590 And Jet Fuel Suppliers and Manufacturers

Metal and energy

Metal and energy

Diesel EN 590

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 â??) and heavy diesel (with a boiling point range of about 350-410 â??). Widely used in large vehicles, railway locomotives, and ships. The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

1. BUYER issues LOI with full company KYC including: Company Details, Contact Details for Signing Authority, and Passport Facing Page.2. SELLER issues Soft/Full Corporate Offer SCO/FCO) including: Full Company Details, Contact Details for Signing Authority, Passport Facing Page, and Company Banking Details.3. BUYER accepts terms and issues Irrevocable Corporate Purchase Order (ICPO) addressed to the SELLER. ICPO MUST include SELLERâ??S procedures on BUYERâ??S official company letterhead.4. Included with ICPO, BUYERâ??S Bank issues a BCL/POF/RWA bearing the SCO REF Number: SCOKVPL0524001 a. BUYER authorizes SELLER and/or SELLERâ??S Financial Service Provider to verify BCL/POF/RWA via BUYERâ??S Bank. 5. SELLER issues PPOP upon successful verification of BUYER bank BCL/POF/RWA. Documents included in the PPOP document package are:a. SELLER Bill of Lading b. Loaded SGS Report Q&Q -(Notarized).c. Chief Officers Ullage report-(Notarized) d. SELLER Charter Party Agreement (CPA) e. Product Passport (product analysis report) -(Notarized) f. Certificate of Origin -(Notarized) g. Statement of Product Availability -(Notarized) h. Commitment and Assurance Letter to supply -(Notarized) i. Authority to sell and collect (ATSC) -(Notarized) 6. End-to-end procedure after issuing PPOP is NOT expected to exceed TEN (10) working days, including 96 hours for vessel loading laycan. 7. Included with PPOP, SELLER issues Commercial Invoice (CI), and NCNDA / IMFPA to BUYER. 8. The BUYER signs and returns the executed documents to the SELLER. If the documents are not executed in a timely fashion. The SELLER may terminate this agreement without prejudice to any rights or remedies of the SELLER. Notice will be in writing. 9. After safely receiving the PPOP and returning the executed CI and documents. The BUYER MUST issue either MT 700 DLC or MT 799 BLOCKED FUNDS to the full value of commercial invoice amount. 10. Additionally, the BUYER MUST present his vessel for loading in the nominated port and be ready within 24 Hrs to load the full cargo. When requesting the UDTA to be issued, BUYER MUST provide the following details to the SELLER: a. VESSEL NAME b. VESSEL Q88 c. Vessel Agent full contact details 11. After fund instruments and vessel nomination details are received. The SELLER will issue Unconditional Dip Test Authority (UDTA) to the BUYER. SELLERâ??S agent will contact the BUYERâ??S agent and program the vessel for ShipTo-Ship (STS) loading within 24 hours. 12. BUYER loading LAYCAN will commence 24hrs after the UDTA is issued to the BUYER. BUYER has 96 hours Laycan to finish loading the vessel. CIN: U74999DL2016PTC298417 13. BUYER Dips Tanks prior to vessel berthing. BUYER obtains fresh SGS Quantity and Quality report. 14. After successful Dip Test and Q&Q report. BUYER instructs account manager to make full payment of the full value of commercial invoice via SWIFT MT103 to SELLERâ??S nominated accounts.

Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia

Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.

We supply top-grade EN590 Diesel fuel and high-quality Diesel D6, both meeting rigorous international standards. EN590 is ideal for all diesel engines, while Diesel D6 serves various industrial applications. We offer competitive pricing and CIF delivery terms. Significant discounts are available for bulk purchases, making our products a reliable and cost-effective choice for both retail and wholesale buyers.

EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.

Direct from Kazakhstan Refineries, EN 590 Ultra Low Sulphur Diesel(ULSD) & Jet Fuel A1, tank to tank or CIF transactions are available. Kazakhstan origin with very competitive prices. Also available Azerbaijan origin EN590 10 ppm & Jet fuel A1 from state owned refinery.

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation

We can supply Diesel en590 10ppm with very good price. Not necessary to follow seller process, seller will follow buyer own procedure. If you want we can immediately arrange a meeting with End seller Only for serious buyer

D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.

product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months

(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST

Non Russian origin, Jet Fuel A1, FOB Rotterdam or FOB Houston, no advance payment, no deposit, seller able to do tank to vessel & tank to tank Rotterdam or Houston, please