Wanted : Chemical Like Nonylphenol Polyoxyethylene Ether Suppliers and Manufacturers

Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.

Economy blend is a blend of 70% Robusta and 30% Arabica Cherry. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Crema Blend is 60% Arabica and 40% Washed Robusta. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Regular Blend is a blend of 30% Arabica and 70% Robusta. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Speciality blend is a mixed blends of 100% Arabica. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Premium Blend (Espresso Blend) is 65% Arabica and 35% Robusta. Roasting coffee transforms the chemical and physical properties of green coffee beans into roasted coffee products. The roasting process is what produces the characteristic flavour of coffee by causing the green coffee beans to change in taste. Roasted beans smell like coffee, and weigh less because the moisture has been roasted out. They are crunchy to the bite, ready to be ground and brewed.

Palm sugar is a sweetener made from the sap in coconut palm trees. It has a mild caramel flavor that is a popular ingredient in Southeast Asian and African cooking. Palm sugar is considered a healthier alternative to other sweeteners because its production involves minimal processing with no added chemicals. Because it's unrefined, it also retains high levels of plant-based vitamins and minerals that can benefit your health. Palm sugar also has a low glycemic index compared to other sweeteners, which means itâ??s less likely to cause your blood sugar to spike and crash. While research is ongoing, some studies suggest that palm sugar is a good alternative sweetener for people with diabetes

We are supplier and exporter of Paraffin Oil. Light Liquid Paraffin Oil IP is highly purified mixture of liquid saturated hydrocarbons obtained from petroleum and is highly paraffinic in nature. Light Liquid Paraffin oil is transparent & free from fluorescence in daylight. It is colourless, tasteless, and odourless when cold. Light liquid paraffin oil IP highly refined hydro-treated oil has excellent thermal & chemical stability, having high flash point & is soluble in Chloroform & solvent Ether.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

We are prominent processors and exporters of a wide range of dextrin including Tapioca White Dextrin that protects the fiber by forming a thin coating and also provides stiffness to some of the varieties of interlining fabrics. It is highly appreciated as an efficient thickening agent for textile printing purposes. It is made from eco-friendly raw materials and used as a carrier in color as well as dyestuff industries.

We are prominent processors and exporters of a wide range of dextrin including Tapioca White Dextrin that protects the fiber by forming a thin coating and also provides stiffness to some of the varieties of interlining fabrics. It is highly appreciated as an efficient thickening agent for textile printing purposes. It is made from eco-friendly raw materials and used as a carrier in color as well as dyestuff industries.

We are prominent processors and exporters of a wide range of dextrin including Tapioca White Dextrin that protects the fiber by forming a thin coating and also provides stiffness to some of the varieties of interlining fabrics. It is highly appreciated as an efficient thickening agent for textile printing purposes. It is made from eco-friendly raw materials and used as a carrier in color as well as dyestuff industries.

We are prominent processors and exporters of a wide range of dextrin including Tapioca White Dextrin that protects the fiber by forming a thin coating and also provides stiffness to some of the varieties of interlining fabrics. It is highly appreciated as an efficient thickening agent for textile printing purposes. It is made from eco-friendly raw materials and used as a carrier in color as well as dyestuff industries.

StaThick-MS-CWS-E1414 is a modified, Vegan, Gluten-Free, Plantbased, Non-GMO, Cold Water Soluble starch used as a Emulsifier, Binder, Stabilizer and Thickener in Instant food products and various mayonnaise, sauces and gravies. This product has good resistance to heat and shear. It's stable to conservation and resistant to freezing. The special property of StaThick-MS-CWS-E1414 starch is its large water binding and fat binding Capacities.

Acetylated Distarch Phosphate (E1414) is used to stabilise oily foods. E1414 helps to emulsify fat and prevent it from separating. When added to foods, the modified starch forms gels and thickens the texture without having to be heated. E1414 is used in a variety of applications.

Infobox references. Phosphated distract phosphate starches can be used as a food additive (E1413) as a freeze-thaw-stable thickener (stabilises the consistency of the foodstuff when frozen and thawed) within the European Union in products such as soups, sauces, frozen gravies and pie fillings.

Monostarch phosphate, E1410 in the E number scheme of food additives, is a modified starches. These are not absorbed intact by the gut, but are significantly hydrolysed by intestinal enzymes and then fermented by intestinal microbiota.

Distarch phosphate, E1412 in the E number scheme of food additives, is a modified starch. These are not absorbed intact by the gut, but are significantly hydrolysed by intestinal enzymes and then fermented by intestinal microbiota.