It is an important filler in paints, detergents and soaps & semi-reinforcing filler in rubber. Filler in paint & rubber, Ceramic, agro, Detergents, Soaps, animal feed coating.
Soapstone powder is also written as H2Mg3(SiO3)4 or Magnesium Silicate, which corresponds to 4.8% H2O; 31.7% MgO and 63.5% SiO2. In pulverized form it is whiter in appearance. The compact variety of soapstone powder is called steatite or soapstone. The word soapstone powder has been named probably due to its soapy feel. French-chalk is the trade name of pulverized soapstone powder of pure white quality which forms the base for many cosmetics and toilet preparations. Talcum powder is valued for its extreme softness, smoothness, high lubricating and hiding power and ability to absorb oil and grease. It is chemically inert to Acids and Alkalies. It has been found to be an excellent filler. It can withstand temperatures up to 1300�ºC. It has low electrical and thermal conductivity. Above all it can be easily powdered, cut and sawn into any shape and size. These properties in Talc are of extreme value for various industrial applications. We offer high-quality Talc Powder that is a metamorphic hydrated magnesium silicate with a soapy feel and pearly luster. Its lamellar structure and the platy ness give excellent results to the products. Composites filled with Talc enhance the performance properties of the compound. It exhibits higher stiffness, creepsâ?? resistance at both ambient and elevated temperatures. It has a greasy feel. Hydrous Magnesium Silicate Powder is the basic raw material for PP, LD, HDPE compounding, paints industries, paper industries, Rubber, Pharmaceutical Industry, PVC, Cosmetic, Baby Talc powders, and many more. Talc is used in many industries such as Papermaking, Plastics, Paint and Coatings, Rubber, Food, Electric Cable, Pharmaceuticals, Cosmetics, Ceramics, etc. Talc finds use as a cosmetic (Talcum Powder), as a lubricant, and as a filler in paper manufacture.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the worldâ??s best reserves in India. Talc is the worldâ??s softest and most hydrophobic mineral â?? insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications .under brand name â??NANOTALâ?? having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. NANOTAL also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. Itâ??s us use in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
We offer to the customers Talc Powder, also known as Soapstone, is a hydrous of Magnesium Silicate. Our Talc Powder is processed using latest techniques. It also undergoes stringent checking to ensure its quality. We deliver Talc Powder in safe packaging like plastic bags and also in customized packing materials. Avail from us high quality Talc Powder at cost-effective rates. Attributes Pearly lustre Has lamellar structure Highly oil absorbent Low specific gravity Easily dispersed Resistant to thermal shocks Applications Used to give smoothness and whiteness to paper Ideal partial replacement of Titanium Dioxide Suitable as a pitch absorber Provides good sanding, bending and holding properties to paints Suitable for improving drying pressing resistance of ceramics Used to lend superior electrical properties and toughness to switch boards and spark plugs Utilized in foundry for molding Used as a filler in plastics, asbestos products and polishes Suitable to be used as finishing of certain textiles Demanded by plastic industries to be used as filler and dusting agent
Food grade talc for confectionery, talc ip, bp, ultra fine talc for automobiles, talc, soapstone, steatite for plastics and paint, calcium carbonate powder for food, confectionery and ultra fine calcite powder, dolomite powder, china clay powder, quartz lumps and powder, silica sand, river sand and mica.
NANOTAL 2000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 1.80 microns and Top Cut D-97 : 7.00 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 3000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 1.00 microns and Top Cut D-97 : 5.00 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 1000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 2.50 microns and Top Cut D-97 : 9.50 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
Product Detailed Description: "Chemical analysis Item Percentage SiOâ?? 62.70 MgO 30.94 Al O 0.36 CaO 0.54 Fe O 0.19 Na O 0.101 KO 0.04 L.O.I 4.81 P O5 0.044 H O 0.18 Total 99.905 CIE Brightness 89.5 YI 0.1 Item Percentage Special Gravity 2.816 Mohr Hardness 1 Surface Area M2/G3 13.04 Density Loose M2/G3 0.0588 Acid Soluble 0.46 PH 7.01 Absorbed Moisture 0.46 Minimum Order Qty : 50 tons Units : Tons Packaging Details : "Jumbo bags small bags " Capacity : "Jumbo bags: 1.25-1.5 Ton small bags 25 or 50 kg bags" Seller Product Code : Code: MRC TC
Rock salt, quartz, silica sand, gypsum, talc, limestone.
Kodomo Baby Powder comes with a formula that contains anti-irritant ingredients, dermatologically tested to keep skin smooth, and helps absorb excess sweat. Fragrance, softness and moisture provide freshness and comfort all day long. There are 2 types of Kodomo baby powder. Kodomo Baby Powder for Baby available in 2 variant : Classic (blue) and Rice Milk (pink). Kodomo Baby Powder for Kids available in 3 Variant: - Refreshing Powder (blue original) - Moisturizing Powder (pink flower) - Calming Powder (Violet lavender) Ready in 3 size: - 48 x 50 Gr - 12 x 200 Gr - 12 x 300 Gr
Talc is used primarily as a glidant to improve powder flow in tablet compression. Of course, talc is also used by the personal care industry in talcum powder as an adsorbent and by the cosmetic industry in other types of powders and blushes. For price, specifications and other details please contact us.
Tapioca starch powder (manioca starch), shisha and restaurant charcoal. briquettes. industrial charcoal, wood pellets, wood powder, wood pellets, wood briquettes, wood chips, wood sawdust, wood shavings, dried hibiscus, 99% sesame seed, neem seeds, soybeans, raw cashew nuts rcn, cameroon pepper, black pepper, mica flakes, quartz, quartz a grade lumps, quartz boulders, mica quartz (quartz with mica contamination), zinc ore /lead ore, green and brown copper, talcum, chilli pepper quartzite, white quartz, hibiscus shifting, hibiscus, turmeric, aluminium bauxite , monozite, zircon sand, columbite tin ore , phosphate rocks , cassiatora cassia tora, gum arabic , gum olibanum frankincense , quartz crystals , titanium oxide.
Quartz, potash feldspar lumps,, white feldspar lumps, grey feldspar lumps, pink feldspar lumps, white feldspar powder, white feldspar chips, white feldspar grits, pink feldspar powder, pink feldspar grits, pink feldspar chips, grey feldspar powder, grey feldspar grits, grey feldspar chips,soda feldspar lumps, soda feldspar chips, soda feldspar grits, soda feldspar powder, barite lumps, barite chips, barite powder, talc, soap stone.
Rock phosphate , dap, urea, talc powder, npk plant.
Talc powder, calcium carbonate, quick lime, china clay, precipitated silica.
Talc is the softest mineral filler used in the Plastics industry. It has high resistivity, low gas permeability, low abrasiveness, and high lubricity. All of these qualities are attributed to Talc's platey structure. The aspect ratio of Talc fillers is as high as 20:1. Because it is a commodity Plastic with low weight and density, its uses can remain limited without plastic fillers and additives that make it more substantial. One such plastic filler/additive is talc, a water-repellent, chemically inert mineral that consists of a layer or sheet of brucite between two sheets of silica. Talc Powder is the powdered form of Magensium Silicate. It possesses several physical and mechanical properties which uniquely suit Plastics and Polymers manufacturing. Following is a snapshot of how Plastics and Polymers industry finds use for Talc powder: Talc is a soft mineral and easily micronizable into fine particle sizes. Subsequently, these fine particles of Talc efficiently fill up inter-particular spaces within polymer compounds. This, in turn, increases the stiffness and impact strength of plastics and polymers. Talc has better thermal conductivity in comparison to polymer. This means that heat transmission through the mixture is quicker because of the presence of Talc. As a result, both the processing and cooling of plastic compounds is accelerated because of Talc, leading to faster production rates. Polymers filled with fine and lamellar (platy & layered) Talc can withstand more strain without deformation (creep or cold flow) as compared to unfilled polymers. Additionally, Talc also achieves the highest creep resistance against any other mineral filler. Talc's lamellar structure, combined with its fineness, fills up smallest of pores in plastics. Consequently, this prevents water vapour or oxygen transmission through the resulting plastics. This property is crucial for food and pharmaceuticals packaging industry. Due to its hydrophobicity (water-repellent nature) and chemical inertness, Talc contributes chemical resistance to plastics and polymers. Silver Stone Industries specializes in manufacturing extremely fine and lamellar Talc. Our Talc powder suits all the needs for plastics and polymers.
Talc
What is Talc? Talc is produced from the mineral talc, which is mostly formed of magnesium, silicon, and oxygen. It absorbs wet effectively as a powder and making it perfect for keeping skin dry. What are the Purposes of using Talc? Talc is a high-temperature-resistant accelerator used in the ceramic industry. In generally, using talc to ceramics has significant impacts, such as improving the optical and electronic characteristics of the ceramic material and glazes. What are the specifications of Talc? Specifications of Talc Serial No Chemical Composition Percentage 1 SiO2 62.5% 2 MgO 30% 3 Fe2O3 0.2% 4 CaO 5% 5 Mesh +200 What are the Applications in Ceramics? Talc is usually used in the ceramics industry. Talc adds whiteness and improves temperature in bodies. Small amounts of talc are used to change the body and improve strength. What are the uses in others? Itâ??s found in a variety of consumer goods, including child powder, adult body and face powders, and a variety of other cosmetics. What are the negative side? While talc is usually regarded secure but few research shows health problems. Talc inhalation can occur coughing, chest pain and difficulty breathing. Though very few talcum can prove serious problem.