Brief information -- A quaternary modified softening agent with terpolymer structure and excellent hydrophilicity. -- HTcone 3206 E is very stable in acid and mild alkali condition at normal temperature while it also has excellent stability at 100degree below pH 8,which is suitable for dyeing machine and setting machine . -- Confers soft, silky and bulky hand feels to fabrics, as well as hydrophilicity while absorbency is 2 â?? 3 seconds. General properties -- Appearance: pale transparent liquid -- pH: 5 â?? 8 (1% solution at 20 degree) -- Ionicity: nonionic -- Solubility: easily soluble in water --Solid content : 53% Properties and fields of application -- Resistant to high temperature, mild alkali at normal temperature, strong electrolytes and shearing stable wihout silicone spots. -- Natural soft, smooth and non-greasy hand feels. -- Excellent hydrophilicity that exactly solves the conflict of hand feels, hydrophilicity and washing resistance. -- Suitable for various process and euqipments with high flexibility. -- Suitable for various fibres, such cotton, T/C, CVC, etc, especially best performance to cotton. -- Excellent hydrophilicity that allows direct shade repair and avoids re-pollution during the rapair. -- Better cost performance compared with softener flakes at same price, which achives performance combined softener flakes and hydrophilic silicone softeners. Application -- High concentration product and can be diluted 5-10 times. -- Padding: HT-3206E: 20 â?? 50 g/L Cure at 100degree and set at 150 â?? 180degree for 50 seconds -- Dipping: Ht-3206E: 2 â?? 5% (O.W.F) Temperature & time: 25 â?? 50degree �? 20 â?? 30 min -- Specific process should be adjusted by testing. Packing and storage -- Packing: 125 kg/polyethylene drum -- Storage: 6 months in sealed container at room temperature
Silicone sofener for durable soft finish.
Silicone sofener for durable soft dry handle to cotton.
Premium soft handle to cotton, synthetics and their blends. Ideal durable softener for polyester fabrics. APEO / NPEO free.
Premium softness. Suitable for cotton, synthetics and their blends, both woven and knits. Durable. Easy to dilute. Economical.
Premium softness. Suitable for cotton, synthetics and their blends, both woven and knits. Durable. Easy to dilute. Economical.
Premium durable silky soft handle to cotton, synthetics and their blends. Offers very luxuriant handle and limpness to fabrics. APEO / NPEO free.
Durable elastomeric handle to cotton and its blends. Excellent bouncy softness to treated fabrics. APEO / NPEO free.
Silicone softener for very good surface smoothness. Ideal for drum washing.Durable silky soft handle to cotton and its blends.
Main Components: Special modified block silicone compound Appearance: light yellow translucent viscous fluid Ionicity: weak cationic PH value: 5-8 (30% water solution) Solubility: can be dissolved in water at any ratio. Property & Characteristics Impart super soft, smooth and fluffy hand feeling for polyester, cotton and blended fabrics. Good alikali-resisting, salt-resisting and hard water-resisting. Excellent cost performance. Application: Be suitable for polyester, cotton and blended fabrics, also can be for soft finishing of yarn, sweater, socks and other fabrics. Can be used for dyeing mills and washing plants.
Gelatin, without fixed structure and relative molecular weight, is partially degraded by collagen in animal skin, bone, muscle membrane, muscle and other connective tissues and becomes white or pale yellow, translucent, microglossy flakes or powders. Is a colorless, odorless, non-volatile, transparent hard amorphous substance, soluble in hot water, insoluble in cold water, but can slowly absorb water expansion and softening, gelatin can absorb the equivalent of 5-10 times the weight of water. It is a common thickener. Application: Gelatin can be divided into food, photographic and industrial uses. Edible gelatin as a thickening agent is widely used in the food industry to add jelly, food coloring, premium gummies, ice cream, dry cool, yogurt, frozen food, etc. In the chemical industry is mainly used as bonding, emulsification and high-grade cosmetics and other raw materials. Gelatin can also be used as vermicelli to make it stronger.
PHYSICAL PROPERTIES Properties BC-SR Conc BC-VX Conc BC-PL Series BC-HTR Series Specific Gravity 1.38 1.35 1.38 1.2 Average Particle Size,Microns 4 - 6 3 - 4 15 5 - 6 Softening Point Deg.C 155 - 165 130 - 140 90 - 110 125 - 135 Decomposition Point Deg.C > 200 > 200 > 290 > 300 Heat Stability Deg.C - - 240 270 - 290 Solvent Resistance Very Good Poor - APPLICATIONS Paper Coating Water Base R R Solvent Base R Textile Printing R R Dyeing R Paints/Inks Water Base R M Solvent Base R Plastics M R R PVC Plastisols R M Wax Candles & R M Modeling Wax Clay Colouring R R Miscellaneous Art & Craft R R Banners R R R = Recommended M = May Be Used (After Trial) BC-SR Conc. Series : Thermosetting type of high strength pigments with fine particle size,used for Solvent/Water Based Paints,Inks,Papercoating,Textile,Plastisols,Crayons,Plastics etc. Applications. Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R),Red Orange,R.Red,Pink(B), Pink(M),Pink(S),Magenta(S), Magenta(R), Magenta(B),Violet(B),Violet(R),Royal Blue,Peacock Blue BC-VX Conc.Series : Brillaint,high strength series with very fine particle size used for Textile-Printing, Oil/Water Based Paints/Papercoating etc. applications. Shades : Saturn Yellow,Brilliant Yellow,Z.Yellow,Bright Yellow,Geneva Green,Glow Green, Glow Green(S),Deep Green,Jet Green,Golden Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R), Orange(S),Red Orange,R.Red, Rich Orange(Y), Rich Orange(R),Arch Chrome,Pink(B),Pink(M),Pink(S),Magenta(S),Magenta(R), Magenta(B), Violet(B),Violet(R),Royal Blue, Peacock Blue BC-PL Series : Thermoplastic polyester based,formaldehyde free,high strength colours,with good heat resistance which melt blend in plastics.These are Fluorescent Pigments specially made for Plastics Application (Execpt PVC calendering). Shades :Brilliant Yellow,Lemon Yellow,Green,Glow Green,Brill Green,Deep Green,Golden Yellow(Y), Golden Yellow(R), Orange(R),Orange(3R),Orange(4R),Orange(Y),Red Orange,Fire Orange,Red,Pink(B),Pink(2B),Pink(3B), Pink(4B), Pink(2R), Pink(R),Magenta(R),Magenta(S),Magenta(B),Blue,Royal Blue,Violet BC-HTR Series : Thermoplastic polyamide based,formaldehyde free,premium high strength colours, with excellent heat resistance,brillance & low mould plateout which meltblend in Plastics. Shades : Lemon Yellow,Green,Golden Yellow,Orange(Y),Orange(R),Red Orange,Red,Pink(R), Pink(B),Magenta
Ambu Bag Resuscitator(Child) Product Code: MED 118 Specifications: Sterile, individually packed in a polybag Size/Strength: peaditric Description 1000ml. self-inflating double ended silicone bag with mounts incorporating Reservoir valve and side feed oxygen inlet Type â??Lâ?? nonrebreathing valve with pressure limiting device wherein it will open if the inspiratory pressure is more than 60cms of water Size 3 Clearhood facemask with silicone cuff. 1.5mtrs oxygen enrichment tubing & 2600ml Reservoir bag all in a carrying case. Pediatric Resuscitator offered find suitability for patients between 20 and 30 Kgs of body weight. These large child silicone resuscitators comprise components developed using food grade silicone rubber & polycarbonate which make these non allergic, long lasting in finish as well as also resistant to aging. Being easy to assemble and disassemble, these silicone artificial resuscitators are also quality assured as these are developed using premium quality silicone material. Further, the complete set of artificial resuscitator comprises oxygen tubing, face mask, double ended bag with valve, reservoir bag.
Ambu Bag Resuscitator(Adult) Product Code: MED 117 Specifications: Sterile, individually packed in a polybag Size/Strength: Adult Description 1600ml. self inflating double ended silicone bag with mounts incorporating Reservoir valve and side feed oxygen inlet. Type â??Lâ?? nonrebreathing valve with pressure limiting device wherein it will open if the inspiratory pressure is more than 60cms of water (9282) Size 4 Clearhood facemask with silicone cuff 1.5mtrs oxygen enrichment tubing& 2600 ml Reservoir bag all in a carrying case. Adult Resuscitators offered are suitable for patients having body weight above 30 Kgs. These adult silicone resuscitators feature use of components made from food grade rubber as well as polycarbonate material which provides in these long lasting finish besides other properties like resistant to aging, non-toxic as well as non-allergic finish. Further, the offered disassembly and reassembly possibility based artificial resuscitators are developed from premium quality silicone with the complete set containing oxygen tubing, face mask, reservoir bag, double ended bag with valve and other support components and accessories.
Very soft handle Hydrophilic Non yellowing Durable finish APEO / NPEO free
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series - 20 Mtr. Head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS Pumps are available Specification Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph - Power Range : 7.5 kW to 75 kW (10 HP to 100 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Thrust Load : 7.5 kW -30 kW -10000 lbs - Speed : 2880 RPM - Head Range : 12 Mtr. To 440 Mtr. - Discharge Range : 2400 LPM to 300 LPM - Outlet Size in Inch : 4.0" & 5.0" - Degree of Protection : IP 58 - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : Star Delta (SD) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
