Anodes in a water heater are divided into sacrificial anode rods and titanium anode rods. A sacrificial anode rod is an exposed metal rod that is inserted into the water heater. It is designed to corrode slowly over time. The sacrificial anode is made from either magnesium, aluminum, or zinc. The lifespan of sacrificial anodes varies greatly based on local water conditions and quality. Annual inspection and replacement for sacrificial anode rods are recommended. In areas with sulfides in the water, there is a reaction with magnesium anodes which creates hydrogen sulfide gas that creates a rotten egg smell in the water. In areas with high conductivity water, aluminum anodes are depleted too quickly, leaving the tank unprotected.
Titanium anode rod, also known as powered anode rod, introduces an electrical current into the water heater to prevent corrosion. They don't corrode and require replacement regularly as sacrificial anode rods do. It provides consistent protection that extends the life of your water heater tank. Since no chemicals are added to the water as with sacrificial anodes, powered anodes will not create smelly water or aluminum hydroxide. In fact, some titanium anode rods can last for decades. UTron manufacture mixed metal oxide coated titanium anode rod for water heater, which is a long-term solution to preventing sulfide smells (that rotten egg smell) produced by well water. With over 20 years of lifespan, you don't need to replace the anode rod at all.
Titanium is widely used in various chemical reaction vessels and heat exchange equipment due to its excellent corrosion resistance, but the disadvantage is high cost. Especially when used as structural parts, this problem is especially prominent. The effective solution is to use titanium steel composite plates. The composite material of titanium and ordinary steel is called titanium steel composite, which has both corrosion resistance of titanium and ordinary steel plate as the strength of structure, and the cost is also greatly reduced.
Place of Origin:Shaanxi, China Model Number:TST396 Application:Industrial Shape:Round Length:2000 Technique:Forged Grade:GR1 GR2, GR1 GR2 density:4.51g/cm3 Material:Titanium Condition:forged Standard:ASTM B 348
Brands: jhx titanium & supower-titanium Products: titanium ingots, titanium slabm, titanium rod Grade:gr1, gr2 & others, Standard: astm, gb/t. Size: slab: 250x1030x4000; 360x1350x4000;360x1478x6000;500x1436x6000; Ingots:
Titanium Bar GR7 has excellent strength, hardness, lightweight, high-temperature resistance, low-temperature resistance, good mechanical processing performance, excellent corrosion resistance, non-magnetic and non-toxic, and good heat transfer performance. At the same time, it has memory and superconductivity. The composition of Titanium Bar GR5 is Ti-6Al-4V, which belongs to (α+β) type titanium alloy, with good comprehensive mechanical and mechanical properties. It has excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. The titanium round bar is mainly used in aerospace structures, engine parts, ships, medical implants and equipment, hydraulic and instrumentation pipes, cryogenic vessels, heat exchangers that require high strength. It is also used in a variety of chemical process equipment and ship and fuselage applications where corrosion resistance is required. Titanium Filler Rod is a hollow filter tube made of titanium powder by high temperature sintering. It is mainly used for titanium rod filters. It is non-toxic, non-magnetic, non-shedding, and has good bio-melting properties. Therefore, it is widely used in liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries. It is especially suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. https://www.yunchtitanium.com/titanium-bar-1
Material: GR. 1, GR. 2, GR. 3, GR. 4, GR. 5, GR. 7, GR. 9(TI-3AL-2.5V), GR19. Titanium bar, titanium rod 1)size: diameter 8-200mm, length as customer`s requirements(up to 6100mm) 3)standards: ASTM B348, ASME SB348, AMS 4928, ASTM F67, F136 4)surface: brightness, pickling 5)packing: export case 6)process method: hot rolling 7)moq: 50kg (sample is available ) 8)trade term: fob shanghai 9)delivery time: 7-20days 10)mtc available.
Titanium Bar/Rod Products Details Place of Origin: China (Mainland) Brand Name: TXM Model Number: YZ-Ti-BAR Application: Industrial Shape: Round Length: MAX:6000mm Technique: Forged Grade: Titanium weight: D*D*3.542*L/1000000 Product name: High Quality ASTM B348 gr2 gr5 forged round Titanium Bar for sale Standard: ASTM B348 AMS4928 ASTM F136 ASTMF67 Surface: acid surface or polishing, sand blasted surface Test Report Support: Chemical Position Mechanical Prosperity Certificate1: ISO 9001:2008 Certificate2: SGS Color: Metallic Condition: R M Y Tolerance1: h6~h13 Tolerance2: H10~H13 Diameter: 5~350mm
China Grade TA1,TA2,TA3,TA4,TC4,TA9,TA18,TA23. America Grade:Gr1,Gr2,Gr3,Gr4,Gr5,Gr7,Gr9,Gr12. China Standard:GB/T 2965 GB/T32185. America Standrd:ASTM B348. Specifications: 2 mm~100 mm. Surface: black, pickling. Product characteristics: small density, high specific strength, acid resistance, alkali, salt, seawater corrosion resistance, superior mechanical performance. Main uses: used for petroleum industry, electric power industry, seawater desalination industry, salt and alkali production industry, coking industry, medical and surgical implants.
Feature of titanium bar&rod High strength; Fine corrosion resistance; Low density, light weight; High/low temperature resistance; High resistance to strong acid.
1. Product name: titanium round bar, titanium rod 2. Grade: gr1, gr2, gr3, gr4, gr5, gr6, gr7, gr9, gr12, gr23 3. Standard: astm b348, ams 4928, astm f67, astm f136 4. Supply status: r or m or y 5. Specification: diameter: 5mm-350mm, length: max.6000mm 6. Application: machinery equipment, electroplating equipment, medical, all kinds of precision machinery part etc. -
Tensile requirements Grade Tensile strength(min) Yeild strength(min) Elongation(%) ksi MPa ksi MPa 1 35 240 20 138 24 2 50 345 40 275 20 3 65 450 55 380 18 4 80 550 70 483 15 5 130 895 120 828 10 7 50 345 40 275 20 9 90 620 70 438 15 12 70 438 50 345 Standard: ASTMB348, AMS4928, ASTM F67,ASTM F136, H7/h7 tolerance is available. Features : 1. Excellent Corrosion Resistance 2. Good Resistance to Effect of Heat 3. Excellent Bearing to Cryogenics Property 4. Nonmagnetic and Non-toxic 5. Good Thermal Properties 6. Low Modulus of Elasticity Application: 1. Chemical industry 2. Petrochemical industry 3. Machining field, Automobile fielded. 4. Textile printing and dyeing 5. Industry, and so on. Minimum Order: Comply with customer's demand. (If the quantity is less than our MOQ, we may recommend you the similar dimension in stock. ) Packaging: Ply wooden cases or In accordance with customers requirement.
we keep ready stock Titanium Rods. we keep Grade 1, 2, 5, 7, 12
Titanium bar & rod description Material(Grade): Titanium and Titanium Alloy ï¼?Gr.1. Gr.2. Gr.5 ï¼? Standard: ASTM F67-00, ASTM F136-02a, ASTM B348-09, AMS 4928R. ASTM F67 & ASTM F136: Medical using. ASTM B348: Industry or other fields using. AMS 4928: Usually be used in military or aerospace. Production Description: Surface: Polished Diameter: 5~300mm Length: 1000~5000mm Shape: Round, Square, Hexagon. Production capacityï¼? Spot goodsï¼?3days ï¼?5tonsï¼? Customized special specificationsï¼?5 or 25daysï¼?â?§10tonsï¼? Package:plywood cases, wooden cases with water-proof package, etc Features: Low density, High specific strength, Excellent corrosive resistance,Good thermal conductivity, Biological features, Plasticity, etc. Applications: Medical using: Surgical implants, artificial bones, artificial teeth, etc. Industry using: Mechanical equipment, plating equipment, etc. Other using: All kinds of precision parts, etc. Our comparative advantages: Advanced detection equipment such as: Ultrasonic flaw detection, infra-red apparatus, turbine detector Considerate after-service Competitive price under the same industries Test report with 3rd party:
item:Titanium Rod Titanium Bar Ti6Al4V for medical industry Place of Origin:China,Shaanxi Brand Name:Tianbang Model Number:TB-BAR Application:Industrial Shape:Round Length:100mm~6000mm Technique:Forged weight:Actual Weight Processing Service:Bending, Welding, Decoiling, Cutting, Punching Product name:Titanium Rod Material:Titanium Gr1gr2 Gr5 Gr9 Gr10 Gr12 Surface:Polished Surface Standard:ASTM B348 ASTM F136 Size:Cusomized Advantage:Corrosion Resistance Color:Silver Certificate:ISO9001:2015 MOQ:1 Kg Lead Time:15-20 Workdays
Our company exports titanium pipes, plates, rods, and wires
Titanium bar/rod Grade: gr1, gr2, gr5, gr7, gr9, gr12, gr16, gr17 etc. Size: dia - 0.315” to 7.87”; Standard: astmb348, ams4928, astm f67, astm f136, h7 tolerance is available. Titanium wire / welded wire: Grade: gr1, gr2, gr5(ti-6al-4v), gr7, gr12, Wire size: dia (0.0012”-0.236”) × straight length/ spool/ coil; Grade: erti1, erti2, erti3, erti4, erti5, erti7, erti9, erti12, erti23, Welded wire size: dia (0.002”-0.4”)× straight length/ spool/ coil Standard: astm b863, aws a5.16; According to the different production process, the titanium wire can be divided into the hot drawing titanium wire and the cold titanium wire. The titanium welding wires we supply can only be round cross section and drawn from titanium wire rods, they are made as filler metal for welding applications by arc, mig, tig procedures.
Titanium bar/Titanium metal rod StandardASTM B265 JIS H4600 GB/T 3620.1 ASTM Pure Ti: Gr.1 Gr.2 Gr.3 Gr.4 Ti Alloy: Gr.5 Gr.7 Gr.9 Gr.11 Grades JIS Pure Ti: Class 1 Class 2 Class 3 Class 4; JIS Ti Alloy: Class 60 Class 12 Class 61 Class 11 Class 60 E GB Pure Ti:TA1 TA2 TA3 TA4;Ti Alloy: TC4 TA9 TC2 TC4 ELI Shape Round Bar / Square Bar/ Hexagon Bar Diameter 1.0mm to 300mm Surface finishPolished Heat TreatmentUsually are Annealled,but Solid Solution & Aging can be also OK
Titanium rod titanium bar, titanium wire titanium wire Brand Material Grade: Gr1, Gr2, Gr5, Gr7, Gr9, Gr12 Execution Standard: Standard ASTM B348-95, GB/T 2965-96 Specifications (size) : * Length Diameter * Length Diameter Φ 0.1 ~ 10 ~ 200 mm * 6000 mm
Titanium rod titanium bar, titanium wire titanium wire Brand Material Grade: Gr1, Gr2, Gr5, Gr7, Gr9, Gr12 Execution Standard: Standard ASTM B348-95, GB/T 2965-96 Specifications (size) : * Length Diameter * Length Diameter Φ 0.1 ~ 10 ~ 200 mm * 6000 mm
