My company is a professional supplier of high quality stainless steel heat exchanger tubes, finned tubes , u-tubes and copper alloys and titanium tubes in china, material grade include austenitic 304, 304l, 316l, 316ti, 310s, 317l, 347h, 321, 2205, 2507, s31803, s32750, s32760, t5, t11, t12, t22, a179, a209(t1), a333(gr6), a334(gr6) astm 338 grade 1 and grade 2. More information about my company please review our web: www.Fengtaiint.Com. My company has gotten iso2000 and ped97/23/ec certificates.
Precision Equipments is the leading Shell and Tube heat exchanger manufacturer. A shell and tube exchanger consists of a number of tubes inter-connected inside in a cylindrical shell. This shell and tube exchanger heat through the tubes. there are two fluids cab exchange heat from one place to another. One tubes flows over the outside and other one flows through the tubes. Whether it is a liquid or gas can transfer easily. These tubes are aligned in parallel or cross arrangement. we are using Standard Quality raw material to manufacture of our products.
Ss 316 Tube Type Heat Exchanger With Titanium Tubes In Ss 316 Grade
Double pipe heat exchanger, tube in tube heat exchanger, shell and tube heat exchanger, coil heat exchanger, titanium products.
Titanium Pipe Tube For Heat Exchanger.
Original titanium sheets, scrap, and heat exchangers..
Brazed heat exchanger has a special heat transfer efficiency . Therefore, it can handle larger capacity with good efficiency , even though there is only a small heat exchange area. Meanwhile, it can save energy and reduce maintenance. Brazed heat exchanger is made by welding the braze and the plate in the high temperature and in a vacuum. The plate is usually made of stainless steel, aluminum or titanium. The efficiency of heat exchanging and the loading capacity for brazed heat exchanger are higher than that of the detachable phe. The design of the plate guarantees the longest working life . You can choose a standard configuration or choose different models as you like. The advantage of the brazed heat exchanger: Can save your investment and transportation expenses 1¡§|can be fixed easily with the compact structure Thin plate High heat insulation ratio 2¡§|it can need one third water as much as that of the sheel-and-tube heat exchanger. 3¡§|less scaling factors High water flowing speed reduce the scale . So less cleaning is needed. 4¡§|light weight The weight is 20%-30% as much as that of shell-and -tube heat exchanger. 5¡§|durable in use Can bear the temperature of 250¡æ and high pressure of 45 bar. No corrosion Remove the gasket 6¡§|high quality The products can be used in the field of metallurgy, food, light industry, chemical industry, refrigerator and heating and ventilation.
The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner Product introduction Semi welded plate heat exchanger The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner. The mesh contacts are formed between adjacentplates and supported by each other, and the rigidity of the plates is remarkably enhanced. Our semi welded plate heat exchanger adopts advanced laser welding technology, which has the advantages of small welding deformation, small residual stress and high quality.Qingdao Ruipute has advanced welding technology, especially for the first time to achieve the welding technology of special materials such as titanium, we are at the domestic leading level in developing and manufacturing semi-welded titanium plate heat exchange equipment. The cavity of the pair of plates forms a pass of a medium; the two pairs of plates are sealed by a sealing gasket which is resistant to corrosion, high temperature and high pressure, and constitutes another medium pass; the two mediums flow evenly in a countercurrent way in the adjacent channels to complete the sufficient heat exchange process. This structure ensures the stability of the welded plate pairs, providing easy maintenance of each pair of plates. It has the characteristics of high safety, high heat transfer efficiency, long service life and easy maintenance. It is suitable for cooling and chemical treatment. It is the ideal alternative equipment to shell and tube heat exchanger and all welded plate heat exchanger.Especially suitable for evaporation and condensation of ammonia coolants,as well as chemical treatment of corrosive liquids. Maximum volume:5000m3 /h; Maximum design pressure:25bar Maximum temperature:150 celsius degree; Minimum difference in temperature:0.5-1celsius degree Nozzle diameter:DN15~DN500; Plate thickness:0.5mm - 1.2mm Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM,CR,VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO, Nickel, AISI904L. Characteristics The semi welded heat exchanger has the general characteristics with shell and tube heat exchanger, and yet have other features like
Titanium bar, titanium wire, titanium tube, titanium sheet, titanium plate, titanium foil, titanium anode, titanium heat exchanger, titanium fittings, titanium screws.
Titanium Platinized Anode, Titanium Plate heat exchanger.
Titanium tube & pipe, titanium plate & sheet, titanium clad plate, titanium heat exchanger.Manufacturer, export
Titanium products: titanium targer, titanium tube, titanium net basket, titanium blanks, titanium mesh, titanium welded pipe, titanium materials:, titanium plate, titanium bars, titanium pipe, titanium ingot, clad material: clad bars, clad plates, titanium equipment, titanium heat exchanger, titanium reactor.
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.
Condensers are used for condensation of vapors and cooling of liquids. Condensers are made by fusing number of parallel coils in a glass shell. Coils are made in different diameters using tubes of different bores. 1. Shell & Tube Heat Exchanger 2. Coil Condenser 3. Coil Boiler 4. Immersion
Shell & Tube Heat Exchangers Air Cooled Heat Exchanger Finned Tube Heat Exchangers Plate Heat Exchangers Oil Coolers Tube Bundles Inter Coolers After Coolers Centac Air Cooler Chillers & Condensors Air Receiver & Pressure Vessels Tank & Coils / Sample Coolers U-Tube Heat Exchanger Kettle Type Heat Exchanger Hairpin Heat Exchanger / Double Pipe Heat Exchanger Reactor Vessel Distillation Columns Storage Tank
Two fluids, of different starting temperatures, flow through the heat exchanger. One flows through the tubes (the tube side) and the other flows outside the tubes but inside the shell (the shell side). Heat is transferred from one fluid to the other through the tube walls, either from tube side to shell side or vice versa. The fluids can be either liquids or gases on either the shell or the tube side. In order to transfer heat efficiently, a large heat transfer area should be used, leading to the use of many tubes. In this way, waste heat can be put to use. This is an efficient way to conserve energy.
Design & manufacturing of heat ex changers as per asme / tema code
Plate-fin radiator manufacturer Heat exchanger for compressor Heat exchanger manufacturer.
Heat transfer equipment: We are manufacturing and supplying premium quality heat exchangers that are engineered to perfection for high level operation and trouble free service life. Product Range Product Range: Shell & Tube Heat Exchangers Graphite Type Heat Exchangers Air Coolers Plate Type Heat Exchangers Economizer Benefits of industrial heat exchangers Business continuity: Automatic cleaning during process and more regulated air flow increases product quality Energy recovery for many applications Less space required faster ROI Features industrial heat exchangers: Accurate temperature control: Industrial process air applications up to 140°C and high temperature applications up to 500°C Heat Exchangers awailable with different MOC on the basis of work to do. Economical design result in the lower operating cost of Heat Exchanger.
GEA Varitherm VT-20 Plate Heat exchanger is made of several Varitherm-design stainless steel plates which are combined to form one effective heat transfer unit. Within each plate package the heat exchanger plates support each other at the metal-on-metal profile cross points, which ensure the stable behavior of the plate gap. The plate gasket has so called glue less sealing system. VT-20 is specially designed for cooling and heating of fluids with particle content up to a particle size of 2 mm as well as condensation of vapors, gas cooling and gas dehumidifying. This unit is in good operational condition. Manufacturer: GEA Ecoflex GmbH Type: VT 20 BC-12 Serial no: 170/12982 Year of manufacture: 2000 Frame material: Stainless Steel AISI 4571 Plate material: Stainless Steel Max. operating pressure: 16 Bars Max. operating temp. 100 C Max flow volume: 90 m3/h Width: 337 mm Length: 999 mm. Manufacturer: GEA Ecoflex GmbH Type: VT 20 BC-12 Serial no: 170/12982 Year of manufacture: 2000 Frame material: Stainless Steel AISI 4571 Plate material: Stainless Steel Max. operating pressure: 16 Bars Max. operating temp. 100 C Max flow volume: 90 m3/h Width (plates) 337 mm Length (plates): 1370 mm.
