Features: 1, This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, natural stone material 2, The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board 3, Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface 4, Excellent flexibility, can bear the bonding layer stretch that caused by temperature 5, Good anti-infiltration function 6, No need to wet the brick wall, effectively improve the efficiency. Surface Treatment: 1, The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. 2, For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction. Operation process: 1, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2 2, Push the ceramic tile or heavy type ceramic tile above it 3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material 4, Can be used for the old ceramic tile re-tread. Cautions: 1, Never mix the dry slurry with water and use again 2, For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation 3, For the painting surface, make sure the initial bond strength and no flake 4, Operating under 5¡æ~40¡æ situation 5, Clean the surface by little wet sponge or cloth before it dry 6, Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler. Technical Reference: Coverage area(amount) Technical reference using 3*3mm tooth scraper about 1.7kg/m2 1, adjust time: about 15min (adjust time: the effective time for the dislocation to adjust) using 6*6mm tooth scraper about 3.0kg/m2 2, cool time: about 10min (cool time: the longest cool time that the adhesive can last ) using 10*10mm tooth scraper about 4.5kg/m2 3, dry time: 24h (according to the weather) 4, water resistance: excellent; non-toxic, prevent fire the smoother the surface, the less amount 5, when dry, anti-weak acid, anti-strong alkali and oil resistance 6, cut degree: £¾1.2MPa (14days later). Store Method: Store in cool and dry place, unopened product can be saved for one year. 25kg/bag
Description VOG is one component, premixed, modified polymer cement based tile adhesive used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion. Where to use: - For wall surface: To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering. - For floor and ground: To bond ceramic tile or building stone. Advantages - Stable performance, use directly after mix it with water; - Good flexibility - Nontoxic, non-radiant, no irritative odor; Application Surface Preparation: - The surface should be vertical, flat, smooth and free of dust, grease and other contaminants. Mixing Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture - VOG 25kg barrel required approximately 5 - 6,0 litres of clean water - VOG 5kg barrel required approximately 1 - 1,2 litres of clean water The mixed materials is immediately ready to use and should be used within 25-30 minutes after mixing. Storage Conditions: Keep in cool and dry places Packaging: 25kg/barrel and 5kg/ barrel SHELF LIFE: 09 months
Dubound's Power is a single component white adhesive. That is functional for high resistance laying of ceramic tiles, glass mosaics and homogeneous tiles. The tacking polymers deformability (Superior Spreadability) and fine finishing of the material affixed.
Dubond's Pinnacle is a hi-tech single part adhesive with superior levels of adhesion and deformability. it is a high performance dry set adhesive for use with water or latex for installing ceramic tiles, marble ,stone, any kind of non porous or vitreous tiles or synthetic stone. use with tuffex ad for high performance for interior and exterior laying and over laying of sites. It has a special function that works specifically to counter conditions such as external pressures on cladding tiles of the skyscrapers and large format tiles with overlaying on existing floors. it is a secure professional method of laying for it has high deformability up to 10 mm thickness.
Dubond's pure is a quartz based tile adhesive, that has excellent results for high resistance laying of ceramic tiles on floor, walls on cement based substrates. It is workable up to 10 mm thickness and the formulation ensures optimum-performance for tile setters. It is absolutely reliable and has its base in superiority of its conception.
Product name :Ceramic Tile Adhesive Unit price : 5.5USD/Bag FOB Tianjin port . Packing: 20Kg/Bag,25MT/20FCL Country of origin :China
H3 is paste big tile and wall tile Unit price : 6usd/bag fob tianjin port . Packing: 20kg/bag, 25mt/20fcl Country of origin :china
H1 is paste Small tile and floor tile Unit price : 5.2USD/Bag FOB Tianjin port . Packing: 20Kg/Bag,25MT/20FCL Country of origin :China
HPMC For Tile Adhesive HPMC for Tile Adhesive HPMC for tile adhesive contains other additives such as cement, sand and limestone, which can increase the adhesion of tile ceramics. Tile adhesive is a new modern decorative material used to paste tiles, face tiles, floor tiles and other decorative materials. There are many kinds of additives in tile adhesive, but usually cellulose ether additives are added to tile adhesive to improve water retention, thickening effect and open time. Construction grade hydroxypropyl methyl cellulose is widely used in building grade. For example, tile bonding, tile mortar. Advantage HPMC cellulose has many characteristics, such as thickening, water retention, dispersion, emulsification, film formation, adhesion, gelation and adsorption. The HPMC has good effect in tile adhesive, It can be improved the Anti-Slip, water retention, opening time, viscosity and strength of tile adhesion. Due to its high water performance, hydroxypropyl methyl cellulose does not need to be pre-soaked or wetted with tiles and substrates, which can significantly improve the bonding strength. The slurry can be constructed in a longer period, and the construction is convenient and uniform. It is delicate and has good anti-slip performance. HPMC with a thickening, binding, dispersing, emulsifying, PH value of stability, film, suspension, adsorption, gel, surface activity, maintain a features such as water and protective colloid. 1. Enhance water retention characteristics and extend working time. 2. Improve the bonding strength of tile adhesives. 3. Improves flexibility and deformability of the caulk. 4. It can enhance the sag resistance of tile adhesives. 5. Good bond strength, both thick and thin, with reduced shrinkage and tiles that do not crack or fall under stress. 6.Mortar has better malleability and flexibility, which makes construction easier and work more efficient. For more information, please visit our website.
Tielo New Construction Tile Adhesive meets the requirements of IS 15477 (Specification for tile adhesive for ceramic and mosaic tiles). Easy application:- single component, ready to use mixture consisting of white cement, crystel and special additives. excellent adhesion and slip resistance.
Tielo Universal Gold Tile Adhesive is a cementations material in powder form composed of cement, chemicals & send, which only needs on site addition of water to make a mortar which is used for fixing tile over any cementation surface or on existing mosaic tiles without removing them, Tielo Universal Gold Tile Adhesive is also used for fixing tiles on difficult surface also.
Dubond's pure is a quartz based tile adhesive, that has excellent results for high resistance laying of ceramic tiles on floor, walls on cement based substrates. It is workable up to 10 mm thickness and the formulation ensures optimum-performance for tile setters. It is absolutely reliable and has its base in superiority of its conception.
Dubondâ??s Peak is an anti-skid, high adhesion quartz adhesive. It can be applied upto 10 mm bed thickness. High cdispersion co-polymers hydraulic binders composed of only cement clinker in peak provides rheological mixture for a prolonged stability. It serves purpose of high resistance laying.
Dubond's pure is a quartz based tile adhesive, that has excellent results for high resistance laying of ceramic tiles on floor, walls on cement based substrates. It is workable up to 10 mm thickness and the formulation ensures optimum-performance for tile setters. It is absolutely reliable and has its base in superiority of its conception.
Powder Glue, construction adhesive heat resistant tile adhesive Porcelain Tile Adhesive is also known as the ceramic tile or ceramic tile adhesive glue, points type, polymer type, heavy brick, is a newly developed products, mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration. 1.Product Description: Product Name : BE GOOD Strong Adhesion� Tile Adhesive Type : Strong Adhesion Type Color : Grey / White Package : 20kg/bag Application : Tile Adhesive Reference Usage : 2-5kg/ m Mixing Ratio Powder : Water = 20kg : 5 liters Pot Life : 4 hours Application Temperature : 5 - 40 Packaging Details: 20kg/bag / 72bags/pallet / 20pallets/20GP /1360 bags/1*20GP Payment: TT Delivery date: 10 to 15 working days. Original country: China 2. Features 1) Strong adhesion and elasticity. 2) Pasting layer is thin and even, and hardly with hollowness. 3) Easy and simple application, no need to pre-moisturize the bricks and walls. 4) Excellent waterproofing performance. Adoption of scraper method will speed up the tiling. 3. Application Range 1) Suitable for interior and exterior use.� 2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick. 3) Suitable for walls, floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on. 4) Suitable for architects with structure which might easily vibrate and split, such� as post-cast strip, pipe orifice.
Tile Adhesive C1 T100 is a tile adhesive with cement base.It is ideal for the adhesion of ceramic wall or floor tiles to surfaces made of concrete and plaster.It is used for both indoors and outdoors.It is classified as glue type C1 at EN 12004 Shades : White
Tile Adhesive C2T T280 is a tile adhesive of cement base enhanced with acrylic rytines of high quality.It is suitable for the tile pasting of low to zero absorbance such as klinker, cotto , granite,glass -inlay, porcelain tiles.It does not slides in the vertical surfaces.For both indoors and outdoors. It is classified as glue type C2T at EN 12004. Shades : White Consumption : 2-5 kg/m2
Supplying business of construction chemicals like Tile Adhesive and Epoxy tile grout
Cement based tile adhesive - a waterproofing, thin-bed cement based adhesive for the fixing of ceramic tiles - non toxic, easy to apply and no wetting of tiles require when fixing 25 kgs / paper bag
Tilecoat is a tile adhesive used in the fitting of ceramic floor and wall tiles. 20 kg 2 ply paper sacks
