Minimum Order Quantity:1 Accept Small Orders: Yes Country Of Origin : India Sulfuric Acid is a mineral acid with the chemical formula H2SO4. Sulfuric acid is also known as Mattling acid or Oil of vitriol. It has a strong acidic nature and is corrosive. At higher concentrations, it acts as an oxidizing agent and dehydrating agent. It is used to manufacture other acids, dyes, glue, wood preservatives, and automobile batteries. It is used in the purification of petroleum, the pickling of metal, copper smelting, electroplating, metalwork, and the production of rayon and film.
- Fish skin contains collagen, a protein that is used in, for example, cosmetics to increase skin elasticity and strength. Moreover, fish skin contains many minerals such as protein, unsaturated fatty acids, sulfur, choline, lecithin and calcium. + Choline enhances memory. + Lecithin has the effect of protecting the liver, promoting the nervous system and developing the brain. + Unsaturated fatty acids are effective in the prevention and treatment of atherosclerosis, high cholesterol, high blood pressure and cardiovascular disease.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
Make from 100% natural ingredients: Pangasius fish skin, salted egg, curry leaves, chili,... Fish skin contains collagen, a protein that is used in, for example, cosmetics to increase skin elasticity and strength. Moreover, fish skin contains many minerals such as protein, unsaturated fatty acids, sulfur, choline, lecithin and calcium. Place of Origin: Vietnam Type: Seafood Snacks Texture: Crispy Taste: No spices, cheese taste, salted egg cheese, salted egg, chili salted egg Protein: 70-80% Size: 100g/200g/500g/ 1000g (Or as customer's request) Moisture: 10%-15% max Shelf Life: 12 months Impurity: 0.5% max MOQ: 100kg
Fish skin contains collagen, a protein that is used in, for example, cosmetics to increase skin elasticity and strength. Collagen can also be turned into gelatine which is utilised in foodstuffs. Moreover, fish skin contains many minerals such as protein, unsaturated fatty acids, sulfur, choline, lecithin and calcium. Choline enhances memory. Lecithin has the effect of protecting the liver, promoting the nervous system and developing the brain. Unsaturated fatty acids are effective in the prevention and treatment of atherosclerosis, high cholesterol, high blood pressure and cardiovascular disease. Packing: 15-20 kgs/PPbag/Box Model Name: Sarah (+84347587878) Process: Collect the skin after fish fillet removing, clean with water and drain, sun -dried Impurities (bone,etc): < 1% Type of fish: Basa Fish/ Pangasius bocourti Color: Nature
ROUND FLAT WINNOWING BAMBOO BASKET Our Rattan Product is made from BAMBOO. It is suitable to decorate for your home, restaurant or contain vegetables, fruits,... These product are made by skillful and professional craftsman, so lines are carefully woven and the design is various and suitable for fancy decoration
We offer Ammonium Nitrate in Granular and Crystalline forms. Ammonium Sulphate Physical State ; Powder Color : White crystalline powder Cas No. 7783-20-2 Arsenic (As) ; NMT 0.00002% Calcium (Ca) : NMT 0.001% Magnesium (Mg) : NMT 0.0005% Non-volatile substances : NMT 0.01% Active Ingredient ; (NH4)2SO4% Assay : Min 99.5% PH Value ; Min. 4.5 Chloride : NMT 0.0003% Nitrates : PNMT 0.001% Iron ; NMT 0.0002% Heavy Metals (as Pb) ; NMT 0.0002% Phosphate (PO4) ; NMT 0.0005% The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides.
Cuttlefish Bone Cuttlefish bone refers to the internal cartilaginous shell of the cuttlefish, a relative of the squid and octopus. Cuttlefish bone is typically smooth and white, with small, wavy lines or ridges. The shell is rich in minerals such as calcium and carbon, and contains more than a dozen amino acids. It is usually boiled, then dried and prepared as a powder for herbal remedies. A cuttlebone is not actually a bone, but rather the internal shell of the Cuttlefish, a small, squid-like cephalopod. In the Cuttlefish, the cuttlebone is filled with gasses and helps control the fish's buoyancy in the water. While for years people have harvested and used cuttlebones for various purposes, the most widely recognized use of the cuttlebone is as a supplement and exercise toy for birds.
- Product name: Rattan Round Bag - Closure Type: Open - Shape: Clutch - Dimension: 20 cm, 30 cm - Lining Material: Rattan - Main Material: Straw - Style: Bohemian - Design: We have over 5 shapes and all colors for your choice - Decoration: Flowers, Embroidery - Gender: Women - Feature: Non-toxic, non-irritation, flexible, can be mass-produced, lightweight - Usage: Decor, gift, using, and etc..
Rattan bags are fashion accessories that are warmly welcomed by young people. Colorful sedge bags carry convenience and style, which can be combined with many different outfits when walking around the city or hanging out with friends or relatives. rattan bags have many different sizes suitable for each different use needs. Modern design with meticulous lines.
Rattan bags are fashion accessories that are warmly welcomed by young people. Colorful sedge bags carry convenience and style, which can be combined with many different outfits when walking around the city or hanging out with friends or relatives. rattan bags have many different sizes suitable for each different use needs. Modern design with meticulous lines.
- Product name: Rattan Round Bag - Closure Type: Open - Shape: Clutch - Dimension: 20 cm, 30 cm - Lining Material: Rattan - Main Material: Straw - Style: Bohemian - Design: We have over 5 shapes and all colors for your choice - Decoration: Flowers, Embroidery - Gender: Women - Feature: Non-toxic, non-irritation, flexible, can be mass-produced, lightweight - Usage: Decor, gift, using, and etc..
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
The bowls are made from coconut trunk, which is very hard but lightweight. There may be slight variations in size because each and every bowl is handmade. The bowls are super smooth, clean, and simple in design. All of the bowls are preserved with Eco-friendly water-based polish. The bowls can be used as kitchenware as well as hotel industry(restaurants) for food serving. The small bowls can be used for deserts and bigger ones can be used as heavy meals or kept fruits. The bamboo cup product line is one of the favorite products in homes, cafes, etc. You can use the product in combination with many different items such as coconut wood spoons and forks to use as food for your family or restaurants. Because the product is made from natural coconut wood, it is very safe for users. Fine art coconut wood products have a very natural color from the dark, perennial coconut wood grains, which are very durable and beautiful.
Wooden Doors And Door Frames Full KD Prosess WE KNOW WOOD BETTER To get quality pieces of wood is not enough to have high-tech machinery alone. We think about it from the selection of raw materials, pieces of wood by experienced experts in their fields to the process of wood covenants. After we process the raw materials into finished products such as flooring, decking, lumbersharing, stairs, doors, tables, chairs, pergola, gazebos, and various other custom products in accordance with the provisions of the High Standard Quality Control that we have in inspecting each of our production results. The front door is often the focal point of a home exterior a door is the first thing guests see when they arrive, it's the last thing they contemplate after leaving. Pt nifinternasional produces a complete line of wooden door to fit your architectural design, either classic door or modern contemporary door. We also manufacture wood door based on your custom made design.
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Our canned tunna fish process line machine high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating .ï¼?also for sardine fish canned production line ) Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .
