Sulfolane (Cas:126 33 0) Suppliers and Manufacturers

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

Linear Alklybezene Sulfonates has the advantages of non-toxic, tasteless, non-irritating, resistant to hard water and acid and alkali, and good compatibility with the system.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.

Konjac gum E425,CAS no. 37220-17-0, is manufactured from the root of the konjac plant. It is composed of 40% Glucomamman and is used in Asia to create a flour and a high viscosity jelly. Konjac gum powder has many characteristics such as hydrophilic, thickening property, stability, emulsification, suspension, gel and film forming properties in food. As an experienced Konjac gum manufacturer and supplier, we has been supplying and exporting Konjac gum for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Konjac Gum Food grade Specification E Number E425 Einecs No 253-404-6 CAS No. 37220-17-0 HS Code 1302399090 ITEMS STANDARD Appearance white powder Viscosity(mpa.s) 20000 mPas min 36000 mPas min Gluomannan content 80% min 90% min Appearance white or cream-color and free flowing powder Particle size 120 â?? 200 mesh Loss on drying 10% max PH of 1% solution in water 5.0-7.0 Lead(Pb) 1.0 mg/kg max Arsenic(As) 3.0 mg/kg max SO2 0.5 g/kg max Insolubles 6% max Total plate count 5000 cfu/g max Yeasts and moulds 100 cfu/g max Coliform Negative Salmonella Negative

Product name:LANOLIN ANHYDROUS CAS:8006-54-0 Appearance: Light yellow colloid,Yellow cream Grade: Cosmetic and pharma grade Standard: USP, EP Features:Lanolin is a natural waxy substance derived from crude wool wax (also often referred to as wool grease or wool fat). It's obtained from the liquids resulting from scouring sheep wool. The wax is separated from the liquid using high speed centrifugation. It's then processed and refined in various stages, including: #Reducing free fatty acids, soap and water content #Eliminating contaminants #Deodorising and bleaching.

Element % Si O2 8.4 Ti O2 0.2 Fe 52.4 Fe2 O3 74.9 Alc O3 5.62 Fe O 0 Ca O 5.15 Mg O 0.34 Na2 O 0.16 K2 O 0.05 Mn 0.54 S O3 1.3 P2 O5 0.4 L.O.I 3.7

Product Name Mercury Chemical formula hg Packing Specification 345kgbottle Inspection Items ContentHg 99999 99999 Total amount of burning residue 0001 00004 among IronFE 000002 000001 Other heavy metalsin lead 000004 000003

Molecular Formula: Na2O SiO3 Cas No.: 6834-92-0 Appearance : white, uniform, beaded. Characteristics: This product possesses high alkaline and defoul character, which is easy to soluble in water, good dispersibility and emulsifiability, not soluble in alcohol. Na2O - 28.0-30.0% SiO2 - 27.3-29.2% Whiteness - 80% Min Fe - 100ppm Max Bulk density - 0.80-0.97g/cc Particle Size(14-60mesh) - 90% Min

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

evian has naturally occuring elecrolytes contributing to the taste nature intended. Mineral Composition (mg/l) Calcium Ca++80 / Magnesium Mg++26 / Sodium Na+6,5 / Potassium K+1 / Silica Si02 15 Bicarbonates HC03-360 / Sulfates S04--14 / Chlorides CI-10 / Nitrates N03-3,8 Dissolved solids at 180�°C: 345mg/l Neutrally balanced pH = 7,2 evian�® is all natural and perfectly pure. Each drop of Evian starts as rain and melting snow on the peaks of the Northern Alps. It filters through layers of glacial sand during a 15+ year journey deep in the heart of the mountains. Through this process, Evian is filtered naturally, without chemicals, giving it the purity, mineral content, and taste that nature intended. EVIAN mineral water This mineral water is with French label EVIAN - 24 x 33 cl pet bottles EVIAN - 24 x 50 cl pet bottles EVIAN - 12 x 75 cl (sport cap) pet bottles EVIAN - 12 x 100 cl pet bottles EVIAN - 12 x 150 cl pet bottles

Product Name: THYROID Source: PORCINE Molecular Formula: C15H10I4NNaO4 Molecular Weight: 798.85 Appearance: White powder Purity: 99% CAS Number: 50809-32-0 EINECS Number: 209-271-1 Standard: USP Supplier: ZhenYiBio Levothyroxine or L-thyroxine is a synthetic thyroid hormonethat is chemically identical to thyroxine (T4), which is naturally secreted by the follicular cells of the thyroid gland. It is used to treatthyroid hormone deficiency, and occasionally to prevent the recurrence of thyroid cancer. Like its naturally secreted counterpart, levothyroxine is a chiral compound in the L-form. The related drug dextrothyroxine (D-thyroxine) was used in the past as a treatment for hypercholesterolemia(elevated cholesterol levels) but was withdrawn due to cardiac side effects.

Product Name: DL-4-Chlorophenylglycine Other Name: Parachlorophenylglycine Molecular Formula: C8H8ClNO2 Molecular Weight: 185.61 Appearance: Offwhite crystalline powder Purity: 98% CAS Number: 6212-33-5 EINECS Number: 612-944-6 Package: Carton drum; 20 KG/drum Application: Medicine intermediate and pesticide intermediate. Supplier: ZHENYIBIO

High Purity 99.9% Food Grade Usp Grade price of Isopropyl Alcohol Cas No 67-63-0

Product name: Acetyl Octapeptide-3 Other Name: Acetyl GlutaMyl Octapeptide-3; Snap 8 Molecular Formula: C41H70N16O16S Molecular Weight: 1075.16 Appearance: White powder Purity: >98% CAS NO.: 868844-74-0 Package: 10MG/bottle; 1G/bottle; 5G/bottle Supplier: ZHENYIBIO Acetyl Octapeptide is a fairly new peptide,and many researchers call it the best anti-wrinkle ingredient available in today's skin care products.Function of acetyl octapeptide 3:Reduce existing facial wrinkles; Effectively prevent the generation of new wrinkles;Reduce the depth of facial wrinkles caused by muscle contractions caused by facial expressions, especially near the eyes and on the forehead.

Product name: Tetrapeptide-30 Other Name: Tegopep; skin lightening peptide Molecular Formula: C22H40N6O7 Molecular Weight: 500.59 Appearance: White powder Purity: >98% CAS NO.: 1036207-61-0 Package: 10MG/bottle; 1G/bottle; 5G/bottle Tetrapeptide-30 is a new peptide that can balance skin tone.There are a variety of mechanisms for brightening skin tone,including reducing or inhibiting tyrosinase activity, preventing the transfer of melanin to keratinocytes and inhibiting melanocyte activation.Tetrapeptide in skin care to inhibits the up-regulation of matrix metalloproteinase-1 (MMP-1) by skin fibroblasts, which are caused by direct exposure to ultraviolet rays or treatment with an ultraviolet-treated keratinocyte-regulated medium.They are suitable for the treatment of inflammatory skin diseases and as active ingredients in skin care products.

INCI Name: POLYQUATERNIUM-22 Molecular Formula: C11H20ClNO2 Molecular Weight: 233.74 Appearance: Colorless to light yellow viscous liquid Purity: 98% CAS NO.: 53694-17-0 Application: cosmetics and skin care products Supplier: ZHENYIBIO Polyquaternium-22 is used as an antistatic agent, film-forming agent and hair conditioning agent in cosmetics. When applied to the care of human hair and skin, it can provide a smooth, lubricious feeling and rich foam. It is suitable for children's washing products, transparent washing products, laundry detergent, hand sanitizer and other washing products. Application: 1. In Shampoo formula,it improves softness, lubricity and richness in hair care products, improves wet combability, and improves overall hair management; 2. In skin care products,it can make the skin smooth and velvety, have moisturizing and lubricating effects on the skin, and reduce the dryness of the skin.

INCI Name: CARBOXYMETHYL CHITOSAN Molecular Formula: C20H37N3O14 Molecular Weight: 543.52 Appearance: White fine powder Purity: 98% CAS NO.: 83512-85-0 EINECS No.: 695-802-6 Application: cosmetics and skin care products Supplier: ZHENYIBIO Carboxymethyl chitosan in cell anti-inflammatory experiments,it can significantly reduce IL6 and TNF�± levels.It also shows anti-inflammatory effects in human experiments; animal experiments promote skin stratum corneum Forming cell generation, accelerating the repair of the skin surface stratum corneum, indicating that it has a skin barrier repair function; it can quickly alleviate the itching of the skin caused by histamine, and significantly alleviate the tingling sensation caused by skin allergies. Animal experiments have confirmed its antipruritic effect.

Product name: Dexpanthenol INCI Name: PANTHENOL Molecular Formula: C9H19NO4 Molecular Weight: 205.25 Appearance: clear colorless to slightly yellow viscous liquid Purity: 98% CAS NO.: 81-13-0 EINECS No.: 201-327-3 Supplier: ZHENYIBIO Dexpanthenol is the precursor of vitamin B5, so it is also called provitamin B5. It contains not less than 98% D-panthenol.It is a colorless to light yellow transparent viscous liquid with a slight special smell.Dexpanthenol uses to treat sunburns,mild burns,mild skin injuries and diseases (concentrations up to 2% to 5%).Dexpanthenol for skin to improves hydration,reduces skin itching and inflammation,improves skin elasticity,and speeds up the healing of epidermal wounds.For this reason, it is sometimes combined with allantoin.Dexpanthenol for hair care, skin moisturizing, and help heal skin wounds,resist inflammation, and help sunscreen. It is widely used in medicine, food, cosmetics and liquid preparations as a precursor of vitamin B5.