Molybdenum electrodes and molybdenum rod, It is find and close product with gray metallic luster.Density>10.2g/cm.
Used for glass industry. It can serve a long life in glass solution at 1300íµ. Also used in the fields of rare earth industry.
Molybdenum Crucible
1. Specification of Tungsten and Molybdenum Crucible:
Diameter of 10-400mm
Length of 10-6000mm
2. The Tungsten Crucible and Molybdenum Crucible are pure tungsten or pure molybdenum materials.
3. Usage: The Tungsten Crucible and Molybdenum Crucible can all be the container for rare earth smelting. We supply a wide range of molybdenum products including electrode, wire, foil, sheet, plate, rod, strip, boats, crucibles, tube, alloys and etc.mail: cyf at jinyuco dot com. Contact: Mr. Amos Guo
MoSi2 heating element is a kind of resistance heating element basically made of high pure Molybdenum Disilicide.We have 1700 grade mosi2 heating element and 1800 grade mosi2 heating element.
Silicon Carbide Rod Silicon carbide SiC heating element Specifications
1. High working temperature: 1400C.
2. Long time last.
3. Varous type available. Rod, U, W, Single Spiral, Double Spiral
Our SiC heating elements Advantage .
1. High working temperature: 1500C (Surface Temperature)
2. Various shapes: Rod, U, W, Single Spiral, Doule Spiral shapes are availible.
3. Large size range: Diameter 14-54mm, Length 200-4500mm.
4. Fast Delivery: Normal quantity can be ready in 10 days.
5. Very competitive prices.
Our SiC heating elements Standard Sizes .
High Temperature Silicon Carbide Rod Sic Heating Element
5875 Silicon Carbide Sic Heating Element Suppliers
Short on time? Let Silicon Carbide Sic Heating Element sellers contact you.
Silicone Carbide heaters (SiC) is a non metal electric heating element made from SiC and its main raw materials. It has some specific properties such as low expansion coefficient, little deformation, stable chemical property, long service life and is very easy to install. SiC elements are used in applications ranging from below 600�°C up to 1600�°C in both air and controlled atmospheres and are commonly used in furnaces.
Since there are no standard furnaces, SiC heaters come in a variety of shapes and sizes and can be both used vertically or horizontally.
The surface load of SiC heaters is in direct relation with the life of SiC heaters and therefore it is necessary to control the surface load within the range when heating.
The ways of mark the dimensionªgc d/l/m/d
D --hot zone diameter ffd-- cold end diameter
M --cold end lengthff n-- the length of spray aluminium zero
L-- hot zone lengthff l --total length
Our sic heating elements adopt special technics and can save you energy.
Silicon carbide (sic) heating element is a non-metal electric heating element made from sic as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc.
Used in the industries of glass, ceramic, machinery, analysis test, semiconductor, science & research and so on.
MoSi2 heater is a kind of resistance heating element basically made of high pure Molybdenum Disilicide.We have 1700 grade mosi2 heater and 1800 grade mosi2 heater.
1. Heat and cool blood:
Lotus root born with cold, with heat and cooling effect, can be used to treat hot disease; lotus root sweet and more liquid, fever thirst, Nvxue, hemoptysis, blood is particularly useful.
2. Laxative diarrhea, spleen appetizer:
Lotus lotus contains mucin and dietary fiber, with the human body, the cholesterol and triglycerides in the human body, so that it is discharged from the feces, thereby reducing the absorption of lipids. Lotus root exudes a unique fragrance, but also contains tannins, there is a certain spleen diarrhea effect, can increase appetite, promote digestion, open stomach health, beneficial to poor appetite, loss of appetite were restored to health.
3. Yi Xue Sheng muscle:
Lotus nutrient value is very high, rich in iron, calcium and other trace elements, plant protein, vitamins and starch content is also very rich, there are obvious tonic blood, enhance the role of human immunity. Therefore, Chinese medicine called it: "the main fill in the spirit of God.
4. Hemostasis stasis:
Lotus root contains a lot of tannic acid, a contraction of blood vessels, can be used to stop bleeding. Lotus can also cooling blood, blood, Chinese medicine that hemostasis without leaving stasis, is the disease of hyperthermia diet to share.
Green Silicon Carbide is produced basically in the same way as black silicon carbide in a resistance type electric furnace with petroleum coke, quartz sand and other materials. It has a good hardness, strong cutting ability, stable chemical properties and excellent heat-conducting property.
Silicon carbide sic electric heater rod for element temperatures up to 1625, for industrial and lab furnaces/ovens, available in a wide variety of standard sizes and geometries, or in customized designs.
Silicon carbide (SiC) electric heating elements for element temperatures up to 1625 available in a wide variety of standard sizes and geometries, or in customized designs to meet the specific needs of various processes and equipment.
SiC heating elements are capable of high power output, and may be mounted either vertically or horizontally. Because the element material remains rigid even at the maximum operating temperatures, no special supports are required, which simplifies the design of the equipment.
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color
CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH)
Bauxite is used in a lot of industries like the chemical industry, refractory, abrasive, cement, steel, and petrol industry amongst others. In chemical, bauxite along with alumina is used in the manufacturing of aluminium chemicals. In refractory, it is used as a raw material for making several products.
Silicon carbide elements are used today in the melting of glass and non-ferrous metal, heat treatment of metals, float glass production, production of ceramics and electronics components, igniters in pilot lights for gas heaters, etc
Origin - India and China
For price, specification and other details please contact us.
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
High quality silicone foam tube for medical, consumer and industrial application. It has outstanding heat-resistant air aging performance, strong sealing, ozone resistance, and is moisture-proof.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
5875 Silicon Carbide Sic Heating Element Suppliers
Short on time? Let Silicon Carbide Sic Heating Element sellers contact you.
