Silicon Carbide Rod Silicon carbide SiC heating element Specifications
1. High working temperature: 1400C.
2. Long time last.
3. Varous type available. Rod, U, W, Single Spiral, Double Spiral
Our SiC heating elements Advantage .
1. High working temperature: 1500C (Surface Temperature)
2. Various shapes: Rod, U, W, Single Spiral, Doule Spiral shapes are availible.
3. Large size range: Diameter 14-54mm, Length 200-4500mm.
4. Fast Delivery: Normal quantity can be ready in 10 days.
5. Very competitive prices.
Our SiC heating elements Standard Sizes .
High Temperature Silicon Carbide Rod Sic Heating Element
U Type Silicon Carbide Rod U-shaped silicon heating element is manufactured by taking two carefully-matched SiC rods and welding a thickened silicon carbide bridge. This element provides for wiring both tail ends from one side of the furnace. The tail ends of the cold ends are metallized with aluminum, which can provide a low-resistance contact surface to the aluminum connection straps and clamps.Features of silicon carbide rod 1. High strength and excellent shock resistance; 2. Heat source is free of noise and air pollution; 3. Anti-oxidization; 4. Anti-corrosion, 5. Long service life, 6. Little deformation, 7. Easy installation and maintenance. 8. Excellent specific rate of heat zone resistance and cold end resistance, 9. Avoiding over-temperature of cold ends to damage the furnace body. 10. Saving energy
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Silicon carbide heating elements Jinyu silca sic heating element is a type of non-metal high temperature heating device. These sic productsare made from fine quality green silicon carbide as its main raw material. The raw material is made first in to a blank, followed by high temperature silication and recrystallization, and becomes high quality stick shaped sic electric heating devices. Compared with metal electric heating material, this type of non-metal elements is featured of high operation temperature, anti-oxidization, long service life, little deformation, easy installation and maintenance. Because of these advantages, sic electric heating elements is widely used in various industries that require high temperature electric furnaces and heating devices. These typical applications include electronics, magnetic materials, powder metallurgy, ceramics, glass, metallurgy and machinery. We adopt new production process of cold end, so jinyu silca heating elements have excellent specific rate of heat zone resistance and cold end resistance, saving energy, long life, avoiding over-temperature of cold ends damaging furnace body. 5
Refractory Grade Silicon Carbide 98% SiC Have a large inventory, Be ready for shipment.
silicon carbide anitwear Performance of reaction sintered silicon carbide anitwear products Reaction sintered silicon carbide antiwear products have the basic properties and main characteristics of high strength, high temperature resistance, high hardness, high wear resistance, corrosion resistance, oxidation resistance, rapid cooling and rapid heating resistance, good thermal shock resistance, good thermal conductivity and high thermal efficiency. Application scope of reaction sintered silicon carbide anitwear products Reaction sintered silicon carbide anitwear products have been successfully used in metallurgy, chemical industry, raw material processing, transportation of highly corrosive and highly abrasive fluid substances, mechanical seals, powder processing, automobiles, papermaking, aviation, aerospace, medicine, food processing, etc.
Silicon carbide boat holder Main features Silicon carbide boat holder has a stable structure, good material thermal stability performance, no deformation during high-temperature use, and an ultra long service life, effectively solving the problem of bearing component loss under high load capacity of photovoltaic cells. Application industry Quartz boat holders and boats commonly used in the photovoltaic industry have a service life of 3-6 months due to their production process and quartz material characteristics. Silicon carbide boat holders and boats, replacing quartz, can have a service life of more than 5 years, significantly reducing usage costs and production capacity losses caused by maintenance and repair downtime. Application scope Silicon carbide boat holder and boats is a key load-bearing component suitable for photovoltaic grade cell diffusion process equipment.
Silicon carbide paddle Silicon carbide paddle performance Silicon carbide paddle, also known as silicon carbide paddle, silicon carbide cantilever beam, is a silicon carbide ceramic product sintered at a high temperature of 1850�°C. It is used below 1350�°C. Silicon carbide paddle, silicon carbide paddle, silicon carbide cantilever beam The strength can still reach 380MPa; its hardness is second only to diamond, and it will not wear for a long time. Application of silicon carbide paddle Silicon carbide paddles and silicon carbide roller are indispensable carriers in the production and synthesis of semiconductor and solar wafers. It is used in the (diffusion) coating process of polycrystalline silicon wafers or monocrystalline silicon wafers in diffusion furnaces, and it is used to carry and transport silicon wafers in a high temperature environment (1000---1300â??). It is a semiconductor wafer loading system key components. Specifications of silicon carbide paddle 1. The company's current product types of silicon carbide paddleare divided into left and right paddles, single-layer paddles, double-layer paddles, etc. Regular sizes are 2378mm, 2550mm, 2660mm, 2045mm, 2270mm, 2378mm, 2394mm, 2450mm, 2550mm, 2640mm, 3748mm, 3600mm, 3700mm, 3900mm. 2. Other sizes of high-purity silicon carbide paddle can also be developed and manufactured according to customer requirements.
Silicon Carbide Nozzle Performance of Silicon Carbide Nozzle Silicon carbide nozzle have excellent properties such as high strength, high hardness, strong corrosion resistance and severe wear, and have a long service life under harsh conditions. The use of silicon carbide nozzle Silicon carbide nozzle are key components of thermal power plants, large boilers, and complete sets of desulfurization and dust removal devices. Silicon carbide nozzles are used for desulfurization in power plants to remove sulfur dioxide and some polluting gases in the flue gas of power plants. The flue gas of coal-fired power plants and the gas in coal-fired combined cycle for gas turbines have a common task, that is, desulfurization and denitrification (of course. and dust removal). The flue gas discharged from the power plant without desulfurization and denitrification directly pollutes the atmospheric environment, while the combined cycle gas without purification treatment will harm the hot-end components of the gas turbine. Its exhaust also pollutes the environment. Specifications of silicon carbide nozzle Silicon carbide nozzle are available in 1/4, 3/8, 1/2, 3/4, 1, 1-1/2, 2, 3 inches, 4 inches and other specifications, support sample processing and can be customized according to customer needs size.
Tungsten carbide rods. Standard packing
