The frame is entirely welded with steel plates, and treated to relive stress by tempering. It adopts three point supporting type rolling guide way to raise shearing precision. Rectangle knife which has four blades has a lasting life. The portable and prompt adjustment of the blades gap and the value of gap are indicated by digital,convenient and fast. Equipped with lighting-alignment, so as to align when shearing. The stroke of knife beam can be adjusted in step less mode. Protection fence to ensure the operation safety. The display devices of the back gauge value and the shearing times are on the front of the machine. The shearing angle can be adjusted
AN INTEGRATED TYPE SHEAR MACHINE TO SHEAR WASTE METAL PIPE,MAX SHEAR FORCE 6ton, color:user defined, power:customized in nude or carton box
SRET Equipment Co., Ltd. JH series automatic shearwelders, covering a range from 40 to 2000 mm wide and 0.6 to 22.0 mm thick metal strip, provide a low cost method to join coil ends together in a minimum cycle time for continuous mill operation. In this process, the trailing end of the leading coil passing through the accumulator and the leading end of the next coil from uncoiler are cut & welded parallel by shear and welder together. These actions are controlled automatically by PLC controller. SRET JH series automatic ShearWelders are designed and continuously improved to provide the most reliable, the fastest and the most automated joining of steel coils. Product range: JH114-JH630 Strip width: 120-2000 mm Strip thickness: 2.0-24.0 mm
Our product regularly shears the pile of the fabrics (tricot, velboa, pola freece, velvet, alroba etc.), hi-pile, carpet, Blanket, woolen fabrics, worsted fabrics and leathers.
We give best type of over crank and under crank shearing machine as per the customer requirement.
Sheet shear Nacked packing
M13, M16 M19 M22 M25 Length 40-250mm. Corrugated paper carton, iron pellet.
Product Description The performance of our metal sheet cutting machine(shearing machine): model: serialQC12K 1. The frame is steel-welded construction, vibrating to eliminate stress, with high strength and good rigidity. 2. Hydraulic driven and returning stroke is activated by the accumulator or nitrogen cylinder smoothly and promptly. 3. The sheet is moved easily through rolling ball equipped on worktable and protect the surface of sheet plate. 4. Closed loop control system is composed of NC controller and the encoder. It has the automatic function of inspection and compensation. 5. The back gauge driven by servo motor adopts rolling ball screw, rolling guiding way, so it's positioning precision could reach 0.10mm. 6. There is a display to count the number of cutting, the stroke of beam could be adjusted stepless. 7. The clearance of blades could be adjusted by hand wheel, the value adjusted is display on the indicating plate. 8. Full machine is guarded with safety guard with interlocker to prevent the operator from injured.
We provide shear stud/ shear connector with ceramic ferrules with standard of iso13918, aws d1.1 and so on. The size from dia:10mm-25mm and the length from: 50mm-250mm We also manufacture stud welding machines, welding guns and so on. Iso13918, aws d1.1
The use of shear load connectors and reinforcing barcouplers in the construction of sports stadiums has increased rapidly in recent times, as their benefits over other building methods have become more widely recognized. "The use of reinforcing bar couplers can provide significant advantages over lapped joints. Design and construction of the can be simplified and the amount of reinforcement required can be reduced." Concrete structures are normally designed with joint sat appropriate places to allow movement to take place. The design of these joints is important for the overall design to function correctly. In mostcases, dowelled joints, corbels and double columns can be replaced by joints incorporating shear connectors. We manufacture Shear Connectors/Studs sizes starting from 9.5 mm to 25 mm Dia, in different lengths max 300mm. We are producing Shear Connectors as per following Standards: 1. AWS D1.1 2. ISO 13918 3. JIS B1198. Shear Connectors are available for welding to flat surfaces, inside angles and out side angles. Suitable ceramic ferrules will be supplied for above mentioned welding applications.
Available for many machines. Also custom granulator knives made from your specs with deliveries of 6 - 12 weeks. All knives made to oem specs by top of the line manufacturers. Shipped freight collect or on your freight account. All knives are made from high quality steels to give optimum performance. Best pricing on the web with a commitment to quality and customer service. Shearing blade
Shearing Machines Salient Features: * Shearing Blades are made out of a special grade steel. * Heavy gear- pinion, pully and drive shaft. * Easy to operate continuously. * The above data are indicative and not binding. Optional Features: * Shearing Blades can be provided extra against cost. * The Shearing size can be modified as per your requirement, accepting the same under the sole discretion of HEW.
Product Description * It is adopted hydraulic driving, the frame steelwelded structure which has sufficient strength and rigidity. * The machine is equiped with a power back gauge on whicn, a manual fine-adjusting, mechanism for blade clearance, ashadw light device enribing cutting operatikon, a connter, a sensitive and reliable safety barrier. * It can also be equipped with a support conveyor. * Whole steel welded frame with full strength and rigidity. * Hydraulic upper transport. * Hydraulic press device with reliable safety bar. * Rapid cutting stroke adjustment is adopted, cutting frame can be adjusted ensuring priduction efficiency increase when cutting short sheet. * Back-gauge station adopts motor-driven measure with fine manual adjustment. * Cutting counter device. * Light line device so it is easy to draw line for cutting.
1.Frame welded, vibration to eliminate stress, high in rigidity, sturdy and durable. 2. Hydraulic drive, swing beam, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder, steady & reliable performance. 3.The position of low blade can be adjusted to ensure the equilibrium of the gap after regrinding. 4. The portable and prompt adjustment of the blades' gap, the value of gap is indicated by dial, positioning reliable. 5. Setting the back gauge by motor. The display devices used to the back gauge' value and the shearing times are on the front of the machine. 6.The stroke of knife beam can be adjusted steplessly,conveniently and fast. 7. Preselection of single or continous.Preselection cutting number and cutting strokes. 8. Roller guide to ensure the quality of cutting sheet-metal. 9.Equipped with lighting-alignment,so as to align when shearing. 10.Protection fence and the electric interlocker to ensure the operation safety. QC12Y4*3200/60*3500,W11S45*3000/110*4000.
Shearing blades Weight
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
Hydraulic and mechanical rake angle shearing machines from 2 mtr to 6 mtr length from 2 mm to 20 mm thickness As per customer requirement and for export - packed in export worthy wooden case
Type: SD Standard: ISO 13918 Material: Mild steel Mechanical properties: Tensile strength >= 450N/mm2 Yield strength >= 350N/mm2 Elongation >= 15% Specification: Head diameter: 19~35mm Shank diameter: 10~22mm Head height: 7~10mm Other material and specifications available upon request.
Rotary Shearing Machine to cut Bars. Billet Shearing Machine with a maximum capacity to cut 200 mm Billet/Ingot. Cold Shearing machine to cut Bars and various sections like Angle,Girder,Channels,T iron etc.
Guilotine shear Piesok nta 3150/6.3, 1985 Piesok cnta 3150/16 , 1988 Piesok cnta 3150/25, 1989 Jelsingrad mg 31.16-20, 1988 Johan kuntz rottary cutter 1420/10, 1991
