JGD - type A double ball rubber joint, JDX type rubber joint diameter (size) JGD - type A double ball rubber joint, JDX type rubber joint diameter (size)
1.Flanged single sphere expansion rubber joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement, axial expansion, etc. 2.According to different materials manufacture, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment.
1, Product Performance: Ansi standard flexible pipe rubber joint is extremely suitable for places where there are complex geologic conditions, large sedimentation range and pipes are easy to be damaged due to frequent alternation between heat and coldness in pipes. The elastic slide transfer and deformation of rubber and the heat dispersion of mechanical force may well prevent the physical damages from the displacement of pumps, valves and pipes. As a poor conductor, it is a harmless to reduce the vibration and noise transmission. The product is designed with smooth inner walls, after testing, it is proved to have no any influence on the flow speed and flux of medium, and keeps stainless for ever, accordingly it will be free of maintenance in operation. 2, Product Application: For air conditioning, heating and ventilating systems in industrial buildings and vessels. Central and ancillary power generating stations in industrial buildings, factories, ships and off-shore applications Sewage disposal and water treatmentplant, pumps, etc. Process piping in pulp and paper plants Piping systems for chilled or hot water in industrial plants Cooling systems for power generation Feed water and draining lines for water works, sewage, sanitary piping systems etc. Oil lines for industrial plants, shipyards, phosphate plants etc. Potable water applications Food applications 3, Product Selection: A limiter must be added when actual work pressure of the rubber compensator reaches 70% or the rubber compensator is installed at the bend or the tee junction. It is recommended to select a transmission type rubber compensator which is installed at the exit of pipe or pipelines adjacent to the exit. It is recommended to select a flush type rubber compensator which is installed on long pipes or structures.
1, Product Information: Rubber flange expansion joint is a flexible connector fabricated of nature or synthetic elastomer, steel ring and fabric. When necessary, metallic reinforcement will be used to provide stress relief in piping systems. It can resist the thermal and mechanical vibration and/or movements. Movement always happens in the piping systems due to varying ambient temperatures, temperature difference when handle materials, and different composition of the joints. Expansion joints can absorb this movement, eliminate the danger of buckling, and reduce the high replacement costs that would result. The Engineers from ZHW will solve the anticipated problems in piping system, including vibration, noise, shock, corrosion, abrasion, stresses and space, by connecting rubber flange expansion joints with it. 2, Product Applications: Due to the rubber expansion joint has good comprehensive performance, mainly used for lifting and conveying, raw water and sewage water of coal-fired power plants, cooling circulation water, condensed water slurry circulation, metallurgical industry, chemical industry chemical pipelines, cooling of the petrochemical industry, the length of the dilution and other industries flexible connection between the distance line. Because the rubber has high wear resistance, but also applies to all industries of granular and powdered and gas transport in low temperature. In addition, in order to guarantee the construction quality, designers and users warned, if the product is installed close to exit of a pump or at the corner of pipes, a caging devices against disjunction must be noted for installation. In general, if there is any hidden trouble in your operation, relevant operation conditions must be noted in your order, and you will get a satisfactory reply. 3, Product Features: High pressure, good elasticity. Large deformation displacement. Noise damping effect, flexible. Long service life. Can be widely used in hotels, factories, residential plumbing systems and recycled water pipes, sanitary pipes, chemical corrosion and frozen pipes etc.
Dimensions: - Width*Length: 36cm * 107cm - Height: 5 cm Purpose: - Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron. Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can slide freely along the angle iron to meet the expansion deformation of main grid. - Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear deformation in the telescopic channel helps the whole device to realize telescopic motion. Features : - Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and have a long service life. - Wear resistance, corrosion resistance. - Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians. - During installation, bolt holes on the bottom and each junction are filled with adhesion agent which makes the whole rubber bridge expansion joints be highly water-resistant. - Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise. Material: Rubber & Steel Plates. Applications: - Rubber bridge expansion joint is used in expressway. - Rubber Bridge expansion installed in the end of bridge. - Rubber bridge expansion joint is used flyover. - Rubber bridge expansion joint is used in connection of bridge
Fig. No. REJ130 Size: DN32-DN300 Cover/Tubel: EPDM,NBR,NR, CSM,VITON,SILICON upon request Flange : Carbon Steel, Ductile Iron,AISI304, AISI316 . Flange drilling according to EN1092-2 PN10/PN16,AS2129 Table D/E, AS4087 PN16,ANSI150,JIS10K Working Pressure: PN10, PN16. Hydralic Test according to EN12266-1, ISO5208 WRAS approved Rubber also available on request.
Fig. No. REJ130 Size: DN32-DN300 Cover/Tubel: EPDM,NBR,NR, CSM,VITON,SILICON upon request Flange : Carbon Steel, Ductile Iron,AISI304, AISI316 . Flange drilling according to EN1092-2 PN10/PN16,AS2129 Table D/E, AS4087 PN16,ANSI150,JIS10K Working Pressure: PN10, PN16. Hydralic Test according to EN12266-1, ISO5208 WRAS approved Rubber also available on request.
PTFE flexible rubber expansion joint Single Rubber Joint Pipe Expansion Joint 1. Acid resistance Flexible Rubber Joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement, axial expansion, etc. 2. According to different materials manufacture, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment. 3. Material is polar rubber, good sealing, light weight, easy installation, long service life, avoid contacting with sharp metal device. 4. If use overhead, can match with elastic support, when installation, bolt with diagonal method to tighten up. 5. If pipeline pressure is high, use bolt connect the flange both ends. 6. Flange connection standard is GB4216.3-4216.5. No. Part Meterial 1 Body NR, CR, IIR, NBR, FKM, EPDM 2 Inner & Outer Rubber NR, CR, IIR, NBR, FKM, EPDM, PTFE 3 Body Carcass Nylon cord fabric 4 Reinforcing Ring Multi-strand coppering steel wire 5 Flange Cast and forged carbon steelStainless steelPlastic (CPVC, PVDF, PPH, UPVC, RPP) MAIN DATA Nominal Diameter(DN) Length L Axial displacement Horizontal Isplacement Angular deflection mm inch mm Extension Compression mm (a1+a2) 32 1¼ 95 6 9 9 15º 40 1½ 95 6 10 9 15º 50 2 105 7 10 10 15º 65 2½ 115 7 15 11 15º
China zhengzhou mason is china's largest manufacturer of rubber expansion joints of the best, our products are sold around the world. Our main products include rubber joints expansion joints, dismantling joints, steel expansion joints. Rubber joints are made of nbr rubber, ptfe rubber, epdm. The flange of rubber expansion joints can be made jis flange, din flange, ansi flange and bs4504 flange. Variety of materials rubber were applied to different media. Different materials of flanges are applicable to different working environment. Please choose according to their specific working environment. Wooden box
EPDM Hose over Fow Hardness-70ShoreA Diameter-100mm Diameter-125mm Diameter-150mm
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
EPDM,NBR,NR, CSM,VITON,SILICON. Size:Size: DN32-DN3000 Pressure: PN10,PN16,PN25 Pressure Test: 15Bar, 24Bar,37.5Bar. End Flange:DIN PN10/PN16,BS EN1092-PN10/PN16,JIS10K,ANSI 125/150 AS 2129 D/E Flange
1. Product Performance: Base on the unique characteristics of rubber such as high elasticity , high air tightness, medium resistance, weathering resistance and radiation resistance, the product, with polyester cord characterized of high strength and high heat stability adopted for skew crossing and compound, is made under high pressure, high temperature molding and cross link. It owns higher density inside to bear higher pressure as well as ideal elastic deformation. 2. Product Application: For air conditioning, heating and ventilating systems in industrial buildings and vessels. Central and ancillary power generating stations in industrial buildings, factories, ships and off-shore applications Sewage disposal and water treatmentplant, pumps, etc. Process piping in pulp and paper plants Piping systems for chilled or hot water in industrial plants Cooling systems for power generation Feed water and draining lines for water works, sewage, sanitary piping systems etc. Oil lines for industrial plants, shipyards, phosphate plants etc. Potable water applications Food applications Product Advantages: High pressure, good elasticity. Large deformation displacement. Noise damping effect, flexible. Long service life. Can be widely used in hotels, factories, residential plumbing systems and recycled water pipes, sanitary pipes, chemical corrosion and frozen pipes etc.
1, Product Information: ZHW rubber expansion joint is the most economical full-pressure elastomeric expansion joint. It is the standard moulded rubber flange expansion joints. As a standard, MX601 consists of high quality rubber body and floating flanges in zinc plated carbon steel. It allows for axial compression/extension, lateral deflection as well as angular movement. A variety of elastomers are available for cover and tube, offering superior resistance of chemical, aging and operating temperature from -30° to +250°F*. 2, Product Advantages: Length of product customization Tough quality and Widely Service Absorption of Vibration, Noise and Shock Wide Range of Flange Materials Available Reduced Turbulence or Material Entrapment Compensation for Misalignment 3, Product Applications: Due to the single sphere rubber joint has good comprehensive performance, so it is widely used in chemical industry, building, water supply, water drainage, oil, light and heavy industry, frozen, sanitary, plumbing, fire protection, electric power and other infrastructure, especially suitable for the vibration is larger, cold and hot pipes changes frequently.
Rubber Water Stop Joint
Thickness 3mm - 6 mm You Supply In Roll Material nitrile rubber Color Black
- Manufactured from durable EPDM rubber. - High UV & Ozone resistant - Fast & easy installation. - Maintenance Free - Provides a permanent seal for any type of construction - Allows exerting a continuous and uniform force against the joint walls. Applications: - Bridges - Parapets - Cark parks - Buildings - Tunnels - Water treatment plants.
