M Series are multi-way rotary joints designed to carry multiple media continuously for low-speed and high-pressure equipment. They are used on machining center revolving tables, rotating platforms, coiling machines, converters, ladle turret, hydraulic machinery, multi-way high pressure controller and etc.
Main Featuresï¼?
Supported by double high-precision maintenance-free bearings for high stability.
High-quality imported sealing parts for prolonged service life.
Stainless steel rotor with special treatment to provide good durability.
Housing material available in aluminum, stainless steel or brass.
Special leakage reflux design to avoid exterior contamination.
Customization available for different applications.
Technical Ratings
Max Speed:300 r/min
Temperature:-30+80
Max Pressure:30Mpa
Media:Hydraulic Oil ,Air ,or similar
Notesï¼?
1.Operation under extreme ratings should be avoided. Maximal working speedis in reverse proportion to working pressure, and is also influenced by the media lubricity and the heat dissipation ability of the sealing components.
When the rotation speed is lower than 10RPM, the maximal pressure can be up to 30Mpa.
2.Inner leakage is allowed between each passage. Please pay attention to the compatibility of different working media to avoid crossed contamination.
3.The working fluid or hydraulic media should be filtered before beingused. The filtration precision should be no lower than 10um.
4.Drainage hole is accompanied for observation and collection of escaping media.
5.For other applications, please consult us beforehead.
Calcined bauxite is produced by sintering/calcining with natural bauxite ore of low iron, low alkali at temperatures of 1600 - 1800 degree Celsius in the rotary kiln or round kiln through pre-heationg, calcination, cooling and other processes. During Calcining, it can be removed impurities and improving the content of alumina. Refractory grade bauxite has high refractoriness, good mechanical strength and moderate slag resistance. Therefore calcined bauxite is one of the most important raw materials for the production of shaped and unshaped refractories for the steel industry, foundries, glass and cement plants.
High Preessure Industrial Use Transformer Vacuumizer Packaging Wxf Series Anti-Explosive Oil Free Rotary Vane Vacuum Pump
Summary:
We have more than 20 types chemical process pump, such as horizontal pump, submersible pump ,vertical pump, semi-submersible pump, fluoroplastic pump, axial pump ,gear pump.ect .
Application:
They are used for transmission of liquids (oil, sea water ,sulphuric acid, phosphoric acid, H2SiF6acid, alkali liquid) with low or high temperature, neutral or corrosive liquids ,or liquids with solid granular and widely used in petroleum chemical industry ,oil refining industry, paper ,pulp industry ,sugar industry ,mining ,etc
Lots of material can be chose for different working condition, such as cast steel ,stainless steel 304,316,2205,904L, Hartz alloy C276,C22, nickel-base alloy GH600, PVDF,PP, UHMWPE-lining .etc
Pump a strong seal system :packing seal ,double face mechnical seal ,cartridge mechnical seal ,API682 flushing syestem.
Our organization is in the league of reliable organizations, offering Boiler Spares. Customers can purchase a wide gamut of Blower, S.S Air Nozzles, Windbox Air Nozzle, Screw Feeder and Rotary Feeder, under this category. All our products are developed by a team of skilled personnel, following industry laid norms and guidelines. To meet the diverse demands and needs of the customers, we offer these boiler spare in different sizes and specifications.
Brand GE
Material of Construction CAST IRON
Model Number IBL, THERMAX, IJT ETC
Grade HICH CHROME
Type HEAT RESISTANT
Size 3 inch
Features HIGH ANGLE FOR VELOCITY DEVELOPMENT
Usage/Application BOILERS , FURNACES
Our fire bars are made of high quality Cast. Iron with chrome content 1.5% to 2%.We have special grade fire bar made for husk, coal and wood. Our fire bar is capable of withstanding high temperatures and is of robust construction. Our slim design fire bar allows the fire bar core temperature to minimum level due to better cooling.
7236 Rotary Joint Rotary Union Mxq Suppliers
Short on time? Let Rotary Joint Rotary Union Mxq sellers contact you.
Magnesia Bricks Description
Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application.
Magnesia Bricks Features:
It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature.
Magnesia Bricks Application
Basic open-hearth furnace for steelmaking
Electric furnace bottom and wall
Permanent lining of oxygen converter
Non-ferrous metal metallurgy furnace
Hyperthermia tunnel kiln
Lining of rotary cement kiln
Heating furnace bottom and wall
Regenerative chamber of glass furnace
Magnesia Bricks Properties
High Refractoriness
Good alkaline slag erosion resistance
High apparent initial softening temperature
Good thermal conductivity
High thermal expansion
Magnesia Bricks Manufacturing Process
Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
Rotary joints
H series for water, avaliable for moderate speed,
Q series for water and steam, avaliable for low speed, gyl series high pressure and speed rotary joins for macchine tool, rotating table, decoiler, m series multi-flow joints and gj series swivel joints.
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power.
The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm.
The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water.
Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size.
Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water.
Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size.
Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Face Materials - Carbon/ Silicon Carbide
Metal Parts - SS 304, Aluminium, Brass
Secondary Seals - Elastomers
Application - Oil, Water, Steam, Air, Coolant
Pressure - 10bar
Temperature - 120dig C
Size Range - 3/8 inch to 2.0 inch
Speed Upto:
750 rpm: For straight threads 2.0" size
2500 rmp: For straight threads 1.0" size
3000 rmp: For straight threads 1 1/2" & 1 1/4" size
3500 rmp: For straight threads 3/4" size & below
Rotary joint is processed by precision NC machine tool,it has strong bearing capacity,flexible,has the ideal sealing effect in liquid and gaseous medium,it can be used on under normal temperature,low temperature,high temperature,corrosive medium safely and reliably.Main seal,secondary seal and dustproof seal effectively achieve zero leakage.
Land Loading Arm, Main Seal, Rotary Joint Supplier.
Looking for land loading arm, folding stair or lining PTFE loading arm? Welcome to contact us, We will provide you with professional product knowledge. More information please view here.
Name: Mini Electric Hand Fan
Power Source: USB, Battery, Electric Battery
Featured Function: Desk mini Fan with Led Light
Rotary Fans Quantity: 07
Battery: 2000mah 18650 Battery
Place of Origin : China
Charging Hours: 3 Hours
Warranty: 1 Year
Usage Time: 7-14 Hours
Logo : Customized
Weight : 1.35
Sealmatic designs and manufactures seals and associated products mainly for the oil & gas, chemical, pharmaceutical, pulp & paper, power, mining and many more industrial applications.
Sealmatic seals are used on a variety of rotating equipment, including pumps, compressors, mixers, steam turbines and other specialty equipment, primarily in the oil and gas, pharmaceutical, chemical processing, mineral and ore processing and general industries.
The following description of the products, various specifications, sizes, size can be customized, and provide drawings for reference, multiple road rotary joint gas road, water road, oil road mixed with non-interference.
DVG-M42 2:
Maximum pressure: 20Mpa
Suitable medium: water, air, hydraulic oil, etc.
Maximum speed: 20 r/min
SR3/4 tow-channel rotary joint:
Maximum pressure: 25Mpa
Suitable medium: water, air, hydraulic oil, hydrogen, etc.
Maximum speed: 120r/min
SR1/2 Tower-channel pneumatic rotary joint:
Maximum pressure: 10Mpa
Suitable medium : water, air, hydraulic oil, etc.
Maximum speed: 800r/min
SRM27 2 Four-channel hydraulic rotary joint:
Maximum pressure: 30Mpa
Suitable medium: water, air, hydraulic oil
Maximum speed: 10r/min
SR1/4 Two-channel hydraulic rotary joint:
Maximum pressure: 25Mpa
Suitable medium: water, air, hydraulic oil, etc.
Maximum speed: 20r/min
SR1 Right angle hydraulic rotary joint:
Maximum pressure: 15Mpa
Suitable medium: water, air, oil, etc.
Maximum speed: 10r/min
SRM12 1.25 Right angle hydraulic rotary joint:
Maximum pressure: 12Mpa
Suitable medium: water, air, oil, etc.
Maximum speed: 10r/m
SR3/4 Right angle hydraulic rotary joint:
Maximum pressure: 20Mpa
Suitable medium: water, air, oil, etc.
Maximum speed: 30r/min
SR Straight through type hydraulic rotary joint:
Maximum pressure: 15Mpa
Suitable medium: water, air, oil, etc.
Maximum speed: 15r/min
Specification: 50,65,80,100,125,150,200,250,320,400,500
SR1 Straight through type rotary joint:
Maximum pressure: 6Mpa
Suitable medium: water, air, hydraulic oil, etc.
Maximum speed: 100r/min (Normal) 200-3000r/min (High Speed)
M22 1.5 Right angle hydraulic rotary joint:
Maximum pressure: 15Mpa
Suitable medium: water, air, vacuum, etc.
Maximum speed: 3000r/min
Beijing University of Aeronautics and Astronautics
Flange connection typem
Maximum pressure: 1.5Mpa
Suitable medium: water, air, vacuum, etc.
Maximum speed: 3000r/min
Dongguan two channel rotary joint
Intermediate through hole type M16 2
Maximum pressure: 25Mpa
Suitable medium : water, Hydraulic oil, air, Hydrogen, etc.
Maximum speed: 60r/min
Hebei two through connector
M22 1.5-M18 1.5
Maximum pressure: hydraulic oil, water, air, hydrogen, etc.
Maximum speed: 60r/min
Zhuhai two through connector
Intermediate through hole type G1/8
Maximum pressure: 25Mpa
Suitable medium: Hydraulic oil, water, air, Hydrogen, etc.
Maximum speed: 60r/min
Jiangsu two more into rotary joint
Two in twenty out rotary joint 1/2-33/8
Maximum pressure: 1.6Moa
Suitable medium: oil, water, gas, etc.
Maximum speed: 60r/min
Fujian Auto Central rotary joint
Five-channel NS2 2
Maximum pressure: 35Mpa
Suitable medium: air, hydraulic oil, etc.
Maximum speed: 15r/min
Excavator Central rotary joint
1/2 nine-channel
Maximum pressure: 50Mpa
Suitable medium: hydraulic oil, air, etc.
Maximum speed: 15r/min.
JARCH is a professional manufacturer of slip rings, cable reel, hose reel, carbon brush and rotary joints,founded in 1998,located in Baoan,Shenzhen,with more than 80 employees and 1000m2 plant.
We have 8 types of patented products at present and have established extensive and long-term cooperation with many domestic research institutes(Beijing University,SAS,,Beihang University,etc), and own a skilled management team.To creat the brand and do famous brand,we carry out strict performance ISO9001 standard of CQC.
Our slip rings are widely used in civil and military fields ranging from robot,spacecrafts, industrial automation, electric power generation, measurement instruments, medial equipments to building construction. Our main products have fiber optic rotary joint / Electro optical slip ring/ through bore slip ring/ Pneumatic electric rotary union/ Hydraulic rotary union/through bore slip ring/ Pneumatic rotary joint,etc.
Our products are sold to more than thirty provinces in China and exported to more than 38 countries. Our main customers have Huawei,Foxconn,Sany Heavy Industry,BYD,etc.
K Series are multi-way rotary joints designed for middle and high speed high-pressure applications. They are used on machining center revolving tables, hydraulic workstations, coiling machines, wind generators, centrifugal machines and etc. ial carbon steel. If other material is required, please inform beforehand.
Main Features:
Supported by double high-precision maintenance-free bearings for high stability.
Special sealing structure designed for high-speed and high-pressure application that provides prolonged failure-free operation.
Low rotation torque.
Special structure to be free from friction heat under high speed.
Running torque unaffected by working pressure and temperature change.
Max working speed up to 6500RPM.
Drainage hole design to avoid exterior contamination.
Customization available for different customer applications.
Technical Ratings
Max Speedï¼?6500 r/min Temperatureï¼?-30ï½?+80
Max Pressureï¼?30Mpa Mediaï¼?Hydraulic Oil
Notes:
1.K Series use labyrinth sealing structure. During installation and operation, the drainage hole L must be connected by oil pipe to the oil collection tank. And the oil pipe must not be blocked to avoid back-pressure.
2.Inner leakage is allowed between each passage. Please pay attention to the compatibility of different working media to avoid crossed contamination.
3.The working fluid or hydraulic media should be filtered before being ued. The filtration precision should be no lower than 10um.
4.Working temperature rise will reduce the viscosity of the working fluid to increase the leakage volume. So during operation, cooling device should be accompanied.
5.The hydraulic system should be equipped with automatic pressure regulator to compensate the pressure loss caused by inner leakage.
7236 Rotary Joint Rotary Union Mxq Suppliers
Short on time? Let Rotary Joint Rotary Union Mxq sellers contact you.
