Reman Toner And Drum Unit For Oki B431 Suppliers and Manufacturers

Polysorbate 20 USP/NF is a polysorbate-type nonionic surfactant used in many commercial and household products. It is composed of 20 repeated units of polyethylene glycol via ethoxylation. Polysorbate 20 USP/NF is a wetting agent, as well as washing agent, stabilizer and solubilizer in food products, laboratory assays and industrial applications. It is also an excipient that stabilizes emulsions and suspensions and lubricant in ophthalmic solutions. Polysorbate 20 USP/NF is used by philatelists to remove stamps from envelopes and to remove residues from stamps, without harming the stamp itself. Polysorbate 20 USP/NF is also used as wetting agent in rubber balers in the elastomer industry. Polysorbate 20 has been used as a shape directing agent to synthesize spheroidal magnetite nanoassemblies. USPâ??NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF). Specifications Appearance: Oily, yellow to brownish-yellow, clear or slightly opalescent liquid Solubility: Soluble in water, in ethanol, in ethyl acetate & in methanol; practically insoluble in fatty oils and in liquid paraffin Relative Density: About 1.10 Viscosity @ 25oC: ~ 400 Identification: A) By IR: Should comply with the test for IR B) Test for hydroxyl value: Should comply with the test for hydroxyl value C) Test for saponification value: Should comply with the test for saponification value D) Test for composition of fatty acids: Should comply with the test for composition of fatty acids E) Chemical test: The solution should become blue Acid Value (mgKOH/g): 2.0 Max Hydroxyl Value (mgKOH/g): Between 96 and 108 Peroxide Value (meq/kg): 10 Max Saponification Value (mgKOH/g): Between 40 and 50 Composition of fatty acid (fraction of the substance) a) Caproic Acid: 1.00 % Max b) Caprylic Acid: 10.00 % Max c) Capric Acid: 10.00 % Max d) Lauric Acid: Between 40.00 % and 60.00 % e) Myristic Acid: Between 14.00 % and 25.00 % f) Palmitic Acid: Between 7.00 % and 15.00 % g) Stearic Acid: 7.00 % Max h) Oleic Acid: 11.00 % Max i) Linoleic Acid: 3.00 % Max Ethylene Oxide & Dioxane a) Ethylene Oxide: 1 ppm Max b) Dioxane: 10 ppm Max Water: Between 0 and 3.00 % Total ash: Not more than 0.25 % Packing 485 lb drum, 4 drums per pallet

Polysorbate 80 USP/NF is a hydrophilic nonionic surfactant used as an emulsifier or surfactant in foods, medicines, skincare products, vaccines etc. It also acts as a surfactant in soaps and cosmetics.USP NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF). Sales Specifications Appearance: Oily, colorless or brownish yellow, clear or slightly opalescent liquid Solubility: Dispersible in water, in anhydrous ethanol, in ethyl acetate and in methanol, practically insoluble in fatty oils and in liquid paraffin Relative Density (g/ml): About 1.10 Viscosity @ 25oC: ~ 400 Identification A) By infrared absorption: The absorption maxima in the spectrum obtained with the sample shall correspond to the reference spectrum of polysorbate 80/reference standard B) Test for hydroxyl value: Should comply with the test for hydroxyl value C) Test for saponification value: Should comply with the test for saponification value D) Test for composition of fatty acids: Should comply with the test for composition of fatty acids E) Chemical test: The solution should become blue Acid Value (mgKOH/g):2.0 Max Hydroxyl Value (mgKOH/g):Between 65 and 80 Peroxide Value:10 Max Saponification Value (mgKOH/g):Between 45 and 55 Composition of fatty acids by GC a) Myristic Acid:5.00 % Max b) Palmitic Acid:16.00 % Max c) Palmitoleic Acid:8.00 % Max d) Stearic Acid:6.00 % Max e) Oleic Acid:Not less than 58.00 % f) Linoleic Acid:18.00 % Max g) Linolenic Acid:4.00 % Max Ethylene Oxide & Dioxane a) Ethylene Oxide:1 ppm Max b) Dioxane: 10 ppm Max Water: 3.00 % Max Total ash: Not more than 0.25 % Packing 485 lb drum, 4 drums per pallet

Mineral oil, also known as liquid paraffin, is a naturally-derived odorless, colorless oily liquid. This variety of Mineral Oil 70 USP represents the most refined, purest grade with a low viscosity. Mineral oil in cosmetics may help prevent moisture loss and rejuvenate oneâ??s skin due to its natural emollient properties, making this a very common ingredient in topical personal-care products such as ointments, creams, sunscreen and lip care. In additional to personal-care formulations, bulk mineral oil 70 is often used in a wide-range of industrial applications as a lubricant or release agent. Itâ??s used in the rubber, machinery, light textile, petrochemical and pharmaceutical industries. This product has been tested and meets the standards set by the United States Pharmacopeia (USP) for purity and quality. Specifications Description Colorless, transparent, oily liquid, free or practically free from fluorescence. It is odorless and tasteless when cold and develops not more than a faint odor of petroleum when heated. Solubility Insoluble in water and in alcohol, soluble in volatile oils. Miscible with most fixed oils but not with castor oil. Specific Gravity Between 0.818 and 0.880 0.8255 Acidity/Alkalinity Not more than 0.1 ml of 0.1 M sodium hydroxide is required. Viscosity Not more than 33.5 centistokes (between 11.0 â?? 14.0 cSt). Neutrality The alcohol remains neutral to litmus. Readily carbonisable substance The oil may turn hazy but should remain colorless, or shows a slight pink or yellow color and the acid should not become darker than the standard solution. Limit of polynuclear compounds The absorbance of sample solution at any wavelength in the range 260 to 350 nm should not be more than one third of the absorbance of standard solution at 275 nm. Solid Paraffin Conforms Sulphur Compounds The mixture remains colorless. Packing 1829.818 LB per Tote 441 LB Drum, 4 drums per pallet

Glycerin USP/FCC is one of the most versatile and valuable chemical substances known to man. It possesses a unique combination of physical and chemical properties that are utilized in a variety of products. Glycerin USP/FCC has over 1,500 known end uses, including many applications as an ingredient or processing aid in cosmetics, toiletries, personal care, pharmaceutical drugs, and food products. It is served as a sweetener, preservative and thickening agent in food products and as a solvent for flavors and food colorings in beverages. It is used in cosmetics and body care products to assist in retaining moisture and is helpful in pulling oxygen into the skin. It is one of the most widely used ingredients in all types of drug and pharmaceutical products including ointments, syrups, capsules, suppositories, etc. Our Glycerin USP/FCC meets the requirements of the United States Pharmacopeia (USP) and meets FCC Requirements. Sales Specification Appearance: Clear Colorless Color,Hazen: 10 max Water Content, %wt: 0.3 max Arsenic, ppm: 1.5 max Heavy metal, Lead, ppm: 5 max ?5 Fatty acid and esters (titrant:0.5N NaOH),ml: 1 max Specific Gravity at 250C: 1.2612 min Assay, %wt: 99.7 min Chloride, ppm: 10 max Sulphate, ppm: 20 max Chlorinated Compound, ppm: 20 max Residue on Ignition, %wt: 0.01 max Ethylene Glycol content, %wt: 0.1max Diethylene Glycol content, %wt: 0.1max Identification by IR: Meet requirement Identification by GC: Meet requirement Packing 551.12 LB drum, 4 drums per pallet 2755.75 LB tote

N-Acetyl-L-Cysteine, commonly known as NAC, is renowned for its powerful antioxidant properties. By neutralizing harmful free radicals in the body, it helps protect against oxidative stress and supports overall cellular health. Additionally, NAC plays a crucial role in the production of glutathione, a vital antioxidant that aids in detoxification and immune system function. N-Acetyl-L-Cysteine USP kosher is used mainly in the pharmaceutical, food and Cosmetics industries. Itâ??s used as an anti-aging agent in cosmetics, itâ??s also used as raw pharmaceutical ingredient in the production of pharmaceuticals and medicines. Itâ??s is also used as a nutritional supplement in animal Feed. This product has been tested and meets the standards set by the United States Pharmacopeia (USP) for purity and quality. Kosher Certificate Is Available Upon Request Specifications (USP41) Appearance: White crystals or crystalline powder Identification: Infrared Absorption Assay: 98.0 to 102.0% (Calculated on the dried basis) Specific rotation alphaD25 +21.0 to +27.0 pH: 2.0 to 2.8 Loss on Drying: 1.0 % Max Residue on ignition: 0.5% Max Heavy metals (Pb): lO ppm Max Lead: 3 ppm Max Arsenic (AS203): 1 ppm Max Cadmium: 1 ppm Max Mercury(Hg): 0.1 ppm Max Residual Solvents: Meets the requirements Particle Size: 20 Mesh Density: Bulk density report only, Tap density report only Total plate count: < 1000 cfu/g Yeast & molds: < 100 cfu!g Coliforms: < 10 cfu/g E Coli: Negative Salmonella: Negative Pseudomonas: Negative S.Aureus: Negative Packing 55.115 lb cardboard drum.

REFINED SUNFLOWER OIL Refined Sunflower Oil For Sale. Our company is a big supplier of Turkish refined and unrefined sunflower oil wholesale, both in bulk and bottled. We regularly supply only high quality and 100% pure sunflower oil without adding other vegetable oils to the product. We offer to buy sunflower oil wholesale at the best price in Ukraine. The number of our customers and tons of sold oil gives our company the status of a reliable partner and supplier of Refined Sunflower Oil wholesale. Today we have developed our own brands of sunflower oil. Our company supplies oil to more than 20 countries of the world. You buy oil with a label of your brand. Commodity: Refined Sunflower Oil (RSFO). Type: Refined, Winterized, Deodorized, Bleached. Origin: European Countries. Standards: Conform to European Norm CEN/TC 307 or Standard of production country, and International Standard Organization ISO/TC 34/SC11, International Food Standards of United Nations and FAO Codex Alimentarius CODEX STAN 210-1999 Standard for Named Vegetable Oils. Quality: Fit for human consumption, free from foreign matter, any other oil or animal fats. Color: Light yellow, clear and transparent. Odor: Neutral odor, without an artificial odor additive. Visibility: Without any deposition and blurriness. Taste: Neutral, without an artificial taste, free from rancidity or any strange or bad taste and smell. Shelf Life: 12 months, can be up to 24 months with addition. Quantity: Up to 5.000 Metric Ton (MT) per month. We are able to supply in packing following: Glass Bottles: 250, 500, 750 Milliliters and 1 Liter each PET Bottles: 1, 2, 3 and 5 Liters each. Tin Cans: 4, 5, 10 and 18 Liters each. PE Jerry Can: 20 Liters each. Steel Drum: 210 Liters each. Flexi Tank (Flexi Bag): From 20 up to 22 Metric Tons each (Loading amount may vary within permission).Inspection: By SGS or similar at buyerâ??s expense. Shipment: In lot of 20 or 40 Feet Container Loading or other shipment quantity. Selling Method: Ex Work, Warehouse, FOB, C&F, CIF ASWP. Delivery: Within 10 days from the date of confirmed payment. WE SUPPLY SUCH TYPES OF REFINED SUNFLOWER OIL RSFO WHOLESALe Kindly send us an inquiry for full quotation.

Loading Weight: 500 KG to 4500 KG Thickness: 60 mic to 300 mic In addition, we also accept custom orders, according to the requirements of customers. An anti-bulge PE liner bag serves a similar purpose to anti-bulge PE bags but is designed specifically for lining the interior of containers, such as drums, boxes, or other larger packaging units. These liner bags offer the following effects: Bulge Prevention: The primary function of an anti-bulge PE liner bag is to prevent bulging or expansion of the container. When the container is filled with contents, the liner bag helps maintain its shape and prevents deformation. This is particularly important when transporting or storing goods that may exert pressure on the container walls. Enhanced Product Protection: By preventing bulging, the liner bag helps protect the contents of the container from damage or deformation. It acts as an additional layer of protection, reducing the risk of product breakage, leakage, or spoilage during handling, shipping, or storage. Improved Stability: An anti-bulge PE liner bag helps stabilize the contents within the container. It minimizes shifting or movement of the products during transit, which can help prevent damage caused by impacts or collisions. This is especially beneficial for fragile or delicate items that require careful handling. Ease of Discharge: Liner bags can facilitate the emptying or removal of contents from the container. As the liner bag maintains the shape of the container, it allows for easy pouring or extraction of the contents without the need for excessive shaking or handling. Hygienic Barrier: Liner bags can provide a hygienic barrier between the container and its contents. This is particularly important in industries such as food and pharmaceuticals, where maintaining cleanliness and preventing cross-contamination is crucial. The liner bag acts as an additional layer that can be easily disposed of, ensuring a clean and sanitary environment.

Drum material, European Certificated Stainless Steel AISI 304 Cooling unit supplies automatic cooling down Filtration by front located stainless steel filter Specially designed aluminium fan Specially designed serpentine heaters 600 kg/pes Hydraulically controlled tilting & Pneumatically controlled door opening Control unit with PLC & LCD touch screen panel LG brand PLC, Touch screen Power transmission with special design belt system Power supply is 380 Volt, 3 phase, 50 Hertz Optional Features European Certificated AISI 316 Stainless Steel Rotating door Silicon softening injection system Humidity control unit Natural gas heating Auto cooling for electrical box by air conditioner Dryer mechanices are totally controlled by PLC control unit to command heating, rotating, time and cycle. Tilting hydraulically controlled and door opening pneumatically controlled. Unloading is done by tilting as standard option Steel serpentines, stainless steel drum and cooling unit are standard features as well Dryer machines are totally controlled PLC control unit to command heating, rotating, time and cycle. Tilting hydraulically controlled and door opening pneumatically controlled. Unloading is done by tilting as a standard option. Steel serpentines, stainless steel drum and cooling unit are standard features as well