GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm Max Cable Distance 10km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
100g qsfp28 zr4 Guanglianâ??s 100G QSFP28-ZR4 Optical Transceiver Module is designed for use in 100GBASE Ethernet and 4x28G OTN client interfaces throughput up to 80km over single mode fiber (SMF) with duplex LC connectors. Taking EML TOSA+ SOA+PIN+ROSA+PCBA separate design, it has great reliability, airtightness and heat dissipation performance. This transceiver is compliant with IEEE 802.3ba 100GBASE-ZR4 and OTU4 4I1-9D1F standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. It is suitable to be used in various applications, such as 100G Ethernet, 112G OTN OTU4, telecom, access network, data center interconnection, and 5G wireless network. 100g qsfp28 zr4 Features BOX (EML TOSA+SOA+PIN ROSA) packaging technology Support both 103.1Gbps and 112Gbps aggregate bit rate 4 x 28G DFB-based LAN-WDM DML transmitter 4 x 28G electrical interface Up to reach 80km with FEC on SMF 3.3V power supply voltage Power dissipation â?¤6W Operating Case Temperature: 0~70â?? Duplex LC connector 100g qsfp28 zr4 Application 100GBASE-ZR4 Ethernet Access Network Telecom Network Data Center Interconnection(DCI)
200g qsfp56 Guanglians 200GBASE-SR4 optical transceiver module supports link lengths of up to 100m over multimode fiber (MMF) with MTP/MPO-16 connector. It is compliant to IEEE 802. 3bs and QSFP56 MSA standards. The 200 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and de-multiplexing of the eight wavelengths are managed within the device. It is suitable to be used in various applications, such as data centers, high-performance computing networks, proprietary Interconnections etc. 200g qsfp56 Product Features COB (Chip on Board) packaging technology Supports 200Gbps aggregate bit Low Power Dissipation, Max 4.0W Each End Up to 70m transmission with OM3 multi- mode fiber Up to 100m transmission with OM4 multi- mode fiber 850nm VCSEL/PIN photo detector Operating Case Temperature: 0~70 200g qsfp56 Application 200GBASE-SR4 Ethernet Data Center HPC Interconnects Proprietary Interconnections
Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet
The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optechâ??s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G. Features - Hot pluggable QSFP28 MSA form factor - Compliant to IEEE 802.3ba 100GBASE-LR4 - Supports 103.1Gb/s aggregate bit rate - Up to 10km reach for G.652 SMF - Single +3.3V power supply - Operating case temperature: 0~70â?? - Transmitter: cooled 4x25Gb/s LAN WDM DFB TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) - Receiver: 4x25Gb/s PIN ROSA - 4x25G electrical interface (OIF CEI-28G-VSR) - Maximum power consumption 4.0W - Duplex LC receptacle - RoHS-6 compliant Applications - 100GBASE-LR4 Ethernet Links - Infiniband QDR and DDR interconnects - Datacenter and Enterprise networking
SINY OPTIC-COM CO.,LTD. was founded in 2008, is ISO9001 and ISO14000 optical components manufacturer in China. SINY main products: Free Space Optical Isolator Polarization Dependent Isolator Polarization Independent Isolator Collimator Receptacle Receptacle With FA SINY's collimator Receptacle have two type: A-Lens Collimator Receptacle, C-Lens Collimator Receptacle. Please contact us for your special requirement.
40g mm 100m qsfp+ optical transceiver Specification Data rate: 40g Channel: 4*10 Distance: 100m Interface: mpo Fiber: mm Ddm: yes Place of origin: made in china Port:shenzhen Features High channel capacity: 40 gbps per module Up to 11.1gbps data rate per channel Maximum link length of 100m links on om3 multimode fiber or 150m links on om4 multimode fiber High reliability 850nm vcsel technology Electrically hot-pluggable Digital diagnostic sff-8436 compliant Case operating temperature range:0°c to 70°c Power dissipation < 1.5 w Standards Compliant to ieee 802.3ba Compliant to sff-8436 Rohs compliant. Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 25G DWDM 10KM transceiver for duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1563.86nm~1528.77nm Max Cable Distance 10km Connector Duplex LC Transmitter Type 1563.86nm EML Extinction Ratio 3.5dB Media SMF Power Consumption
Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm Max Cable Distance 10Km Connector Simplex LC Transmitter Type DFB BiDi Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 1310nm Max Cable Distance 10km on 9/125um SMF Connector Duplex LC Transmitter Type DFB 1310nm Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-SR 850 nm VCSEL 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over multi-mode fiber for link length of 100m. These transceiver designs are optimized for high performance and cost-effective to supply customers with the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 850nm Max Cable Distance 70m on OM3 or 100m on OM4 Connector Duplex LC Transmitter Type 850nm VCSEL Extinction Ratio 2dB Media MMF Power Consumption
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Compatible Cisco Form Factor QSFP+ Max Data Rate 44.6Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 5.5dB Media SMF Power Consumption
GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.2Gbps Wavelength 1310nm Max Cable Distance 10km at Single Mode Fiber Connector Single MPO Transmitter Type DFB Laser Array Extinction Ratio 3.5dB Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
Models: Angle of LKD - 4 x12-3528-3030:62 x144 ° : matching LED Cree 2835 3030 size: 250 x 74 mm material: optical level PC and heat-resistant: - 40 ° ~ 120 ° standard: SGS/ROHS environmental protection authentication application: suitable for solar street lamps, communities and the new rural lighting, street lighting and other LED applications at a high speed.Product features: 1. The surface is in the shape of peanut meters, with good evenness and good light efficiency.2. Matched LED with uniform light spots, no astigmatism, no black spots, and very high transmittance without shadow, can maximize LED light utilization rate; 3. This product uses the high precision, aspheric optical design, original installation import optical PC raw materials, to ensure enough injection molding (reduce shrinkage products) we have good quality, and strict with product, all conform to the country and the export standards, the product uses the antistatic shockproof packaging.All products have passed SGS certification and meet ROHS environmental requirements.
100G CWDM 10KM CFP4 Optical Transceiver ITEM NO.:ECP4XX10A-3LCD10 DATA RATE:100G WAVE LENGTH:CWDM DISTANCE:10KM CONNECTOR:LC FIRST:SM DDM:YES PRODUCT ORIGIN:China SHIPPING PORT:Shenzhen Package type: Individual package or 10pcs/package Features Compliant with 100GBASE-LR4 Support line rates from 103.125 Gbps to 111.81 Gbps Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF Digital Diagnostics Monitoring Interface Duplex LC optical receptacle No external reference clock Single 3.3 V power supply Case operating temperature range:0°C to 70°C Power dissipation < 6W Applications Local Area Network (LAN) Data Center Ethernet switches and router applications Standard Compliant to IEEE 802.3ba Compliant to CFP MSA CFP4 Hardware Specification Compliant to CFP MSA Management Interface Specification
Features - Compliant with SFF-8665/SFF-8679 - Compliant with IEEE 802.3bj - 4 independent full-duplex channels - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Low insertion loss - BER better than 10-15 - Operating temperature: -5~+70â?? - RoHS compliant Applications - 40G/100G Ethernet - Infiniband, QDR/EDR
USD110 for 100G rate QSFP optical transceiver module 155M-400G optical transceiver modules We provide 155M-400G rate optical transceiver modules that are compatible with different brands of switches (e.g., Cisco,Huawei,H3C,ZTE,Dell,HP,Mellanox,Mikrotik,Netgear,Brocade,Juniper,Extreme,Quidway,Aruba,Intel,etc.).These optical transceiver modules with wavelengths ranging from 850nm to 1610nm are available in SFP,SFP+,XFP,X2, XENPAK,SFP28,QSFP+,QSFP28 packages.Transmission distances are LRM,SR,LR,ER,ZR,and up to 160 km. Our optical transceiver modules have competitive prices. For example,the unit price of optical transceiver module that replace the Cisco SFP-10G-SR is around USD14 FOB China,and the unit price of optical transceiver module that replace the Cisco QSFP-100G-SR4 is around USD110 FOB China. Welcome to purchase our optical transceiver modules.Thanks.
Features - Compliant with SFF-8402 and SFF-8432. - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Lowest total system EMI solution - Optimized design for signal integrity - Operating temperature: -5~70â?? - RoHS compliant Applications - 25G Ethernet
