Pvc Fully Insulated Receptacle Disconnect Suppliers and Manufacturers

Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5

Item No : 8077-105 (volkan) Size : 5 - 11 Soles : DIP PU Single Density Safety Features Abrasion Resistant Anti Skid Light Weight Oil Resistant Overview Product Name : Volkan Shoe Sizes : 5 - 11 STANDARD FEATURES Abrasion Resistant Anti Skid Anti Static Cushionong Effect DIP PU Construction High Flexing Light Weight Odour Free Oil and Acid Resistant Sweat Absorption Optional Features High Voltage Insulation Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No.: 7190-25 Size: 5-11 Soles: Dip Pu Single Density OVERVIEW Product Name: Flying Boot Sizes : 5-11 Colors: Black STANDARD FEATURES Abrasion Resistant Anti Skid Anti Static Cushionong Effect DIP PU Construction Dual Zipper for smooth Donning & Diffing Extra Ankle Protection Genuine Soft Cow Leather High Flexing Light Weight Odour Free Oil and Acid Resistant Sweat Absorption Optional Features High Voltage Insulation INDUSTRY Aviation Defence and Security BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Combat Boot Item No.: 3002-178 (Combat Boot) Size : 5-14 Soles : DIP PU Single Density Safety Features Abrasion Resistant Anti Skid Light Weight Oil Resistant Overview Product Name : Combat Boot Sizes : 5 - 14 Colors : Black Standard Features Anti Skid Anti Static Cushionong Effect Extra Ankle Protection Genuine Soft Leather High Flexing Light Weight Oil and Acid Resistant PU Rubber Sole Optional Features High Voltage Insulation Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Application: Common applications of PVC plastic granules: Pipes and tubes: PVC is widely used in the production of water supply pipes, drainage pipes, gas pipes, electrical pipes and chemical pipes. This is because PVC has good corrosion resistance and can withstand high pressure. Insulating products: Due to its good insulating properties, PVC is often used to produce electric cables, insulating pipes and insulating parts for the electrical industry. Production of construction materials: PVC is used in the production of construction materials such as wall panels, ceiling panels, doors and windows, PVC flooring, and wall cladding materials. Household products: PVC is used in the production of many household products such as indoor water pipes, plastic carpets, cushions, and sofa covers. Interior and exterior decoration: PVC is also used in the production of interior and exterior decoration products such as wall panels, curtains, and fences.

Product Introduction: PVC is a polymer formed by the polymerization of vinyl chloride monomer (VCM) with initiators such as peroxides and azo compounds, or by the free radical polymerization mechanism under the action of light and heat. Product application: PVC is widely used. PVC has two types: hard (sometimes abbreviated as RPVC) and soft. Hard polyvinyl chloride is used for building pipes, doors and windows. It is also used to manufacture plastic bottles, packaging, bank cards, or membership cards. Adding plasticizers can make PVC softer and more elastic. It can be used for pipeline, cable insulation, flooring, signage, phonograph records, inflatable products, and rubber substitutes.

Application 2-Ethylhexanol is which is used for production of ethers used as plasticizing agents in production of cable insulation and car finishing materials. Colourless, transparent liquid with characteristic odour. Ethylhexanol Mainly used as a raw material for PVC plasticizers. Used as a solvent and preservative. Octanol is mainly used in the manufacture of phthalate esters and aliphatic dibasic ester plasticizers such as dioctyl phthalate, dioctyl sebacate and dioctyl sebacate, etc. Plastic primary plasticizers and cold-resistant plasticizers, defoamers, dispersants, mineralizers, and petroleum fillers are also used in printing, dyeing, and filming.

DOTP has good electrical and thermal resistance. It can replace DOP in PVC plastic electric wire sheath, and can also be used in the production of artificial leather film. In addition, it has excellent compatibility and can also be used for plasticization of acry lonitril derivatives, polyvinyl butyral, nitrile rubber, nitr cellulose, and the like.And it plays a role in improving the hardness and deformability of the product, and can be used as a softener in products such as nitrile rubber, neoprene rubber, EPDM rubber and the like. It is especially used in cable materials with good plasticizing effect and low volatility. It is widely used in various products requiring heat resistance and high insulation. It is an ideal plasticizing for producing temperature-resistant 70C cable materials and other volatile PVC products Agent.

BBIT offers antimicrobial activity against fungi, yeasts and bacteria. BBIT is used for protection and surface anti-bacterial of PVC, silica gel, polyolefin, polyurethane, acrylic resin. Applications include: shower curtain / fabric coating (such as: ski clothing, raincoats, tents) / Vinyl wallpaper and floor / pool substrate / conveyor / soles and uppers / roofing membrane / wire and catheter sheath material / auto accessories (such as: hood, door seals, shock absorbers, steering wheel) / foam material (such as: cushions, gaskets, insulation materials ) / Household Appliances liner (such as: washing machines, refrigerators) / tarpaulins and awnings / antibacterial wall floor paint.

Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. It is solid at room temperature and begins to melt above approximately 37 C (99 F). Common applications for paraffin wax include lubrication, electrical insulation, and candles, wax paper, polishes, cosmetics, and electrical insulators. It assists in extracting perfumes from flowers, forms a base for medical ointments, and supplies a waterproof coating for wood. In wood and paper matches, it helps to ignite the matchstick by supplying an easily vaporized hydrocarbon fuel. Fully refined paraffin wax of which oil content is maximum 0.5% and melting point 60/62 C . semi refined paraffin wax of which oil content is from 1% to 10% and melting point 58/60 , 60/62 or 62/64 C , our paraffin wax colors differ from snow white transparent to cream depending its oil content and being heavy or light grade which is related to the melting point of the raw material used . fully refined paraffin wax is used for cosmetic and food products and semi refined paraffin wax usages is candle making, painting, floor covering.