The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
PE Jaw Crusher series:broken granularity,simple structure,reliable operation,easy maintenance,low operating cost,widely used in mineral,smelting,construction,high-way, rail-way,irrigation area.It could be the first choice for raw material or second crushing.
PE Jaw crusher series:broken granularity,simple structure,reliable operation,easy maintenance,low operating cost.It could be the first choice for raw material or second crushing.Advantages:short toggle,low hanging,big swing angle,long useful life,easy maintenance. Dimensions:1430*1310*1340mm Weight:2.8t Handle ability:4-14t/h
Jaw crusher is based on years of product development. The continuous improvement and refinement has made them the preferred jaw crusher among professionals and our customers. Pe series jaw crusher is suitable for even hardest rock and recycle materials. In stone crushing plant, for example, our jaw crushers are able to work continuously with reliable quality and crushing economy. Our jaw crusher machine is suitable for both stationary and mobile crushing process. Vipeak jaw crushers are primarily used for reducing various kinds of stones and lump materials into medium-grained gravel. The materials to be crushed can be hard, medium-hard and soft minerals whose compressive strength should be not more than 320 mpa. Our jaw crushers adopt v-shape inlet, resulting in higher crushing efficiency. Currently, these products become the preferred primary crushing equipment in the production of stone. They are widely used in many industries, such as mining, metallurgy, building material, railway, water conservancy, chemicals, and so on. Jaw crusher performance and features 1) simple structure, easy maintenance 2) stable performance 3) flexible capacity 4) over loading protection 5) stable performance 6) stable performance 7) even final particles and high crushing ratio 8) high efficiency and low operation cost 9) alternative ordinary and hydraulic types Jaw crusher working principle This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
Jaw crusher introduction Jaw crushers have two types: pe and pex series.Mainly used to crusher all kinds of mining stones primarily, and the largest compression resistance of the material is 320mpa.It is suitable for all kinds of ore and rock primary crushing or secondary crushing. Pe series is used to primary crushing, pex series is used in secondary crushing and fine crushing. T-bolt, clamp. Jaw crusher working principle The jaw crusher adopts the electric motor as the power. The eccentric shaft is revolved by an electric motor through v-belts. It causes the swing jaw following the preconcerted path to crush the feeding material. Thus the material will be crushed in the crushing chamber which is composed of the stationary jaw plate, swing jaw plate and the liner plate. The material is discharged from the lower part of machine that is what you want. Features and benefits of jaw crusher 1.Simple structure and reliable operation. Easy maintenance and low operating cost. 2.The frame of jaw crusher is very firm due to removing welding residual stress.
Jaw crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320mpa. The jaw crusher is widely used in mining, metall industry, building material, highway, railway, and chemical industry.
Jaw Crusher Characteristic and Advantage Simple and strong structure, large crushing ratio, high output. Adopts world-class manufacturing technology and be made of high manganese steel (work hardening steel). Compound pendulum jaw crusher, coarse crushing equipment Casting molding at a time, with wear-resistant & pressure-resistant, having longer crushing life Mainly used for breaking large, medium and small hard stones and the corresponding object. Stable performance, low production cost and even particularly convenient maintenance.
Stone Jaw Crusher Machine Application Mining, metallurgy, construction, highway, railway, water and chemical industry Jaw crusher machine suitable Materials: Marble, granite, basalt, limestone, quartz stone, gravel, iron ore, copper ore etc. jaw crusher exporter Stone Jaw Crusher Machine Advantages 1.Good stability, high reliability Moving jaw Assembly adopts the high quality casting components,heavy eccentric axis also forging billets for processing, which makes the Jaw Crusher with exceptional stability. Compared with other crushing machine of the same specification, we use the eccentric shaft bearings of larger and more durable,so that it has a higher carrying capacity, ensuring their reliability. jaw crusher exporter Stone Jaw Crusher Machine Specification Model Feeding hole Size (mm) Stuff Size(mm) Output Size (mm) Capacity(t/h) Power(kw) Overall Dimensions(mm) PE-150¡¨¢250 150¡¨¢250 125 10-40 1-5 5.5 758¡¨¢758¡¨¢794 PE-250¡¨¢450 250¡¨¢450 210 20-60 5-20 15 1500¡¨¢1400¡¨¢900 PE-250¡¨¢750 250¡¨¢750 210 15-70 15-30 22 1400¡¨¢1300¡¨¢1350 PE-250¡¨¢1000 250¡¨¢1000 210 25-60 15-52 30 1600¡¨¢2000¡¨¢1500 PE-250¡¨¢1200 250¡¨¢1200 210 25-60 20-60 37 1900¡¨¢2200¡¨¢1500 PE-300¡¨¢1300 300¡¨¢1300 260 30-90 30-70 55 1800¡¨¢2300¡¨¢1700 PE-400¡¨¢600 400¡¨¢600 340 40-100 16-65 30 1700¡¨¢1800¡¨¢1600 PE-500¡¨¢750 500*750 425 50-100 45-80 55 1892¡¨¢2054¡¨¢1853 PE-600¡¨¢900 600*900 500 65-160 70-120 55-75 2520¡¨¢1840¡¨¢2303 PE-750¡¨¢1060 750*1060 630 80-140 130-260 80-90 2620¡¨¢2302¡¨¢3110 PE-900¡¨¢1200 900*1200 750 95-165 220-380 110 3789¡¨¢2826¡¨¢3025 PE-1000¡¨¢1200 1000*1200 850 195-265 230-380 110 3889¡¨¢2826¡¨¢3025 PE-1200¡¨¢1500 1200*1500 1020 150-300 400-800 200 4200¡¨¢3750¡¨¢3820
1. All kinds of model available 2. Stable and reliable operation 3. High reduction ratio 4. Uniform-sized finished products 5. Easy to maintain 6. Low operating cost 7.Deep crushing chamber 8.Wide size range of discharging opening 9. The machine has a better performance with the hydraulic coupling.
Jaw crusher is one of the most common crushing equipment. It is mainly applied in crushing the material with the compressive strength under 320mpa. This jaw crusher is usually used in the field of mining, metallurgy, road & railway construction, water conservancy, chemical industry and so on. The jaw crusher of medium and large size designed and manufactured by our company have reached the advanced level with the features of high crushing ratio, high capacity, uniformed product size, simple structure, reliable operation, easy maintenance and low operation cost. Pe venient spare part replacement and easy maintenance. 6.Energy-saving: the stand-alone can reduce the energy consumption by 15-30% while the whole system can save energy by double. 7.Large discharge open range, which can meet different customers' requirements. 8.Low noise and dust pollution.
Jaw Crusher is most widely used in the international market and has the features of high crushing ratio, even granule, simple structure easy maintenance, etc. It can be used for fine crushing and coarse crushing. The highest compressive resistance of the crushed materials is 320Mpa. The large and medium-size jaw crushers are the key products of our company. Especially in designing and producing the large-size jaw crusher, we have stood in the front line of our country.
Jaw crusher product description: Jaw crusher series have features of big crushing ratio, uniform products size, simple structure, reliable work, easy maintenance and low cost. It is widely used in stone mining, metallurgy industry, building material, highway, railway, water conservancy and chemical industries. Various material with compression resistance less than 320mpa can be crushed. Exporting standard, spare parts will ba packed in wooden cases.
Wroking Principle: PE/PEX series jaw crusher adopts the electric motor as the power. The eccentric shaft is revolved by an electric motor through v-belts, which causes the swing jaw moving in the preconcerted path to crush the feeding material. Thus the material will be crushed in the crushing chamber which is composed of the stationary jaw plate, swing jaw plate and the liner plate. The material will be discharged from the lower part of machine that is what you want. Composition Structure: It is made up of frame, eccentric shaft, grooved wheel, flywheel, moving jaw, side guard plate, toggle plate, toggle backseat, adjusting screw, returning spring, fixed jaw plate and moving jaw plate. Toggle plate is of safety function. Features and benefits: 1.Simple structure, easy maintenance, reliable performance, low operation cost and large crushing ratio. 2.Deep crushing cavity with no dead area, which improves the feeding capacity and output. 3.Large crushing ratio and even product size. 4.Gasket-type adjustable discharge opening¡ªreliable and convenient, and its big adjusting range ensures the flexibility. 5.Reliable lubrication system, convenient spare part replacement and easy maintenance. 6.Energy-saving: the stand-alone can reduce the energy consumption by 15-30% while the whole system can save energy by double. 7.Large discharge open range, which can meet different customers' requirements. 8.Low noise and dust pollution.
We offer a huge array of jaw crushers. Jaw crusher, as the name suggests, works on the same principle as the human jaw. It has one stationary jaw (like the upper teeth set) and the other movable (like the lower teeth set) with the material to be crushed (food to be chewed) fed inside the two jaws (mouth) and crushed (chewed) to the desired size and discharged (swallowed) to accommodate fresh input of material (food). "tic" manufactures jaw crushers of crushing capacity upto 300 tph and boulder size upto 1000 mm. Jaw crushers based on single toggle (grease lubricated) as well as double toggle (both grease and oil lubricated) mechanisms feature in our product range, each having its own advantage for specific project requirement.
Jaw crusher is crushing stone equipment with long history. It is widely used in metallurgy, mechanical industry, building material, power, transportation until now, because it is simple in structure, b, reliable, easy for maintenance and repair, and with low cost. It can crush rocks with strength of 147-245mpa. As everybody knows, the main disadvantage of jaw crusher is that lifetime of jaw plates is short. In order to solve this problem, our company has developed special material for it. Also fluid coupling is used in large model jaw crusher to improve start process, and avoid overload.
Application: PE series jaw crusher, whose reduction ratio up to 4-6 and the finished products are even, can be widely used in breaking hard, medium-hard, soft ore, such as various kinds of ore, the solvent, slag, building stones, marble,etc. compression strength does not exceed 320Pa. This machine is suitable for mines,building materials,highway,railway,water conservancy and chemical industry,etc. Features: 1) Firm structure, stable performance, large capacity, even producing granularity. 2) With the increase of production, our jaw crusher can greatly reduce the operating costs. 3) Convenient maintenance and economical running expense.. 4) The large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. Standard export container.
Product introduction: SANYYO PE series jaw crushers are based on a forward-looking idea of making our users enjoy great variety-both casting and welded frame construction.The design offers owners the highest possible fatigue strength, excellent reliability and numerous mounting possibilities. This, combined with special high-quality cast steel components and very durable wear parts, means exceptionally high crusher availability, cost-efficient crushing and low cost per ton. Every SANYYO jaw crusher is a product of know-how and experience optimized by Finite Element Analysis (FEY). Each model is tested virtually for stress, strain, shock, deformation, thermal loading, vibration and noise under a wide range of load conditions. The result is exceptional reliability. Features and values • High reliability • both casting and welded frame construction • Top crushing performance • Wedge setting adjustment • Fast and simple maintenance • Easy and less costly to install • Excellent total crushing economy • Excellent suitability • Highly versatile: ready and able to crush all your tons. Nude packing & wooden case.
Portable Jaw Crusher plant provides a new field of business opportunities for contractors, quarry operators, recycling and mining applications. It offers high efficient and low cost project plan without environment limit for the client. 1000*500*1000.
Working principle of jaw crusher: The motor transmits through belt, drives the movable jaw up and down by eccentric shaft. When the moving jaw plate rises, the angle between the fixed jaw plate and the movable jaw plate gets larger, and the materials can be crushed to reach the crushing target. When then moving jaw plate is down, the angel between the moving jaw plate and fixed jaw plate becomes smaller. The movable jaw plate leaves the fixed jaw plate under the effection of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity. Characteristics of jaw crusher: High crushing ratio, homogeneous final granularity size, simple structure, reliable working condition, easy maintenance, low operating cost and so on. In bulk or container.
