1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material
LDPE:
Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050
LLDPE
Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %
XPS (Extruded Polystyrene) foam insulation boards are commonly available in 4x8-foot sheets. These sheets are used for various insulation applications in construction, such as insulating walls, roofs, and floors. XPS insulation is known for its closed-cell structure, which provides good thermal resistance and moisture resistance.
Bubble / Foam insulation provides the maximum efficiency in controlling heat transfer as the air space built between the layers of foil works to keep radiant heat from penetrating a structure from the outside, and the radiant foil reflects interior heat back into a structure from the inside. Even though you get single bubble and double bubble insulation and 5mm to 25mm EPE Foam insulation.
Technical Specifications:
Three layer of air bubble film laminated with both side silver metalized aluminum film. Our Product is Specially Designed for construction, container insulation.
insulated bags manufacturing etc.
Standard Size : 1.2mtr x 100mtr Bubble Size : 4mm x 10mm Nominal Thickness : 3.5 to 4mm Reflection Ratio : 96%
Thermal Resistance Emissivity : 0.04-0.05
Calcium silicate is a white, crystalline compound with the chemical formula Ca2SiO4. It is primarily known for its role as a high-temperature insulating material with exceptional thermal stability. Calcium silicate insulation is widely used in industrial applications, such as in the construction of furnaces, kilns, and pipelines, where it can withstand extreme temperatures and provide effective thermal insulation. This material is also non-combustible and moisture-resistant, making it suitable for fireproofing and corrosion prevention. Calcium silicate's versatility, durability, and ability to handle intense heat have made it a vital component in a range of industries requiring reliable insulation and thermal protection.
Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³).
The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.
Refractory bricks are indispensable in various industries for lining high-temperature equipment such as furnaces, kilns, and reactors. The utilization of recycled refractory bricks contributes to environmental sustainability by reducing waste and minimizing the demand for virgin resources. Moreover, recycling materials can lead to cost savings compared to sourcing and processing raw materials from scratch, making recycled refractory bricks a cost-effective option for industries. Despite being made from recycled materials, these bricks offer comparable performance to conventional refractory products, providing excellent thermal insulation and resistance to high temperatures. Additionally, recycled refractory bricks can be customized to meet specific requirements, allowing for flexibility based on the application and performance needs of different industries.
Recycled refractory bricks find applications in various industries, including steel manufacturing, cement production, foundries, and glass manufacturing. They offer a sustainable solution for lining high-temperature equipment while maintaining performance and durability.
Permeabilty/wvtr = (astm e96-80), g/h/m²) = max 0.01
Water resistance = no delamination
Vapor resistance = excellent
Tear resistance = good
- using 99% pure aluminum foil with high reflectivity & low emissivity surface is the most effective radiant barrier.
- reinforced with special fiberglass scrim for higher mechanical product strength.
- special bonding layer combined with aluminum foil giving it superior vapor barrier & fire retardant properties.
- resistance to moisture, mold and fungi.
- no change of performances over time due to compaction, disintegration or moisture absorption.
- light weight but high tensile strength with special fiberglass scrim reinforced - installation friendly & durability.
- no crumbling material / non-itchy - eco friendly.
- characteristics of this product is not easily change & is stable & will not delaminated when exposed to high temperature/high humidity of tropical climate.
Packaging: 1.22m x 45m in roll form in pallet
1.22m x 60m in roll form in pallet
Manufacturer insulating light weight insulating refractory mortar castable is a kind of unshaped refractory made of granular and powdery material, in which add a certain amount of binder and water together. It has high mobility, is suitable for casting construction, and can be hardened without heating. Refractory castables consist of refractory aggregates, powders, binders, admixtures, water or other liquid materials. Generally in the use site, it is molded by pour, vibration or tamping method, and can be used as preforms. Refractory castables are mainly used in the metallurgical industry furnace, also in the petroleum, chemical, building materials, power and machinery industry furnace and thermal equipment.
We could offer you the best refractory castable as following:
1.High alumina castable.
2.low cement refractory castable.
3.corundum castable.
4.Self flowing refractory castable.
5.Corundum mullite castable.
6.Silicon carbide castable.
7.Zirconia Refractory Castable.
8.Lightweight insulation Refractory castable
Features and Advantages of refractory castable:
1. High refractoriness, High refractoriness under load.
2. High density, low porosity.
3. Good slag resistance and corrosion resistance.
4. High strength and wear resistance.
5. Good resistance to flake performance.
6. Good thermal shock stability.
7. Scouring resistance
8. Good hot strength.
Each kind of castable refractory material serves a different purpose. Here are some examples as to how people would use them for different applications.
Conventional Dense Refractories. These have a high concentration of alumina cement in their composition. Conventional dense refractory materials can handle temperatures that go as high as 1800 Fahrenheit. Applications such as boiler work require these kinds of materials.
Insulating Materials. Another kind of castable refractory is the insulating kind. They are lower density compared to the other types of castable refractory materials. They have low thermal conductivity as well. They are a good choice if you want something that will resist abrasion.
There is such a wide range of refractory materials that you can choose from for their applications. Castable refractory materials also vary, so we advise calling in for a consultation. Our knowledgeable staff will be happy to help out.
black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality.
black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.
Hothree company is a professional thermal interface materials distributor of BERGQUIST(USA) and DENKA (Japan), which located in Shenzhen China and was established in 2011. We have standing stock for commonly used models , which greatly shortens the lead time for customers.We can provide very competitive price.The commonly models such as: BERGQUIST SP900S,GPVOUS,Sil-Pad900S, Sil-Pad2000, Gap-Pad VO Ultra Soft,Gap-Pad5000S35, Bond-Ply100,HF300P and others are always in stock.
Sapphire wafers
These are thin slices of synthetic sapphire, commonly used as a substrate in a variety of high-tech applications. Sapphire, which is a crystalline form of aluminum oxide (Al�¢??O�¢??), is valued for its hardness, optical transparency, thermal stability, and chemical resistance. Here�¢??s a brief overview of their applications and properties:
Properties of Sapphire Wafers:
Hardness: Second only to diamond, sapphire is extremely scratch-resistant.
Optical Clarity: Transparent across a wide range of wavelengths (UV to infrared), making it ideal for optical components.
Thermal Stability: Can withstand high temperatures, which is useful in semiconductor processes.
Chemical Resistance: Highly resistant to acids and alkalis, ensuring durability in harsh environments.
Electrical Insulation: Sapphire is an excellent electrical insulator.
SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide
Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu.
There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness.
Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3
Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits.
We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains.
These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.
Wollastonite
Wollastonite is one of the most versatile minerals. It is a naturally found mineral that is a mixture of calcium, silicon and oxygen. However, it is majorly found in the regions of Rajasthan, Gujarat and some parts of Tamil Nadu in India
The physical properties of Wollastonite include an eclectic needle looking structure which is high in brightness and has superior tones of white. It also has low moisture, oil-absorbing and high thermal stability with less solubility in water. It is low in volatility and has a high melting temperature. Wollastonite has medium hardness with rank of 4.5 on Mohâ??s scale.
All of these properties make it an excellent and versatile mineral to be used in industries like plastics, paints, ceramics, construction and adhesives to mention a few.
We have majorly focused our supply of Wollastonite mineral on its high-end applications in the ceramics, paints and plastics industries.
Within the sphere of the plastics industry, it is a brilliant and less-expensive mineral substitute for fiberglass, carbon fiber and synthetic minerals. It is very much popular in automobile industries, as it can enhance the strength, dimensional stability, and influence resistance of car parts, aiding the manufacturers with lighter parts.
Wollastonite is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.
It's often used in electronic equipment like connectors and computer housings because of its great insulating and fire-resistant qualities.
Wollastonite mineral is customized to meet the needs of our clients' industries. Our wollastonite is anti-corrosion mineral that is ideal for paints and coatings sector. Wollastonite can improve the fire strength of ceramic tiles and sanitary ware, as well as reduce cracking and glazing faults, for ceramic manufacturers.
Our Wollastonite is an excellent reinforcing filler for cement boards and fire-insulating boards in the building industry.
Aryan Tiles is confident in the quality of its Wollastonite minerals. Wollastonite has proven to be the most adaptable material used in various key sectors, and the market for it is constantly expanding.
As a general rule, The purer the sand, the clearer the products
Silicon and oxygen are the earth's two most abundant elements and together they make silica, one of the earths three most common rock forming minerals.
Akshar Minerals Silica sand is high purity natural crystalline silica. It is inherently bright, white, low in moisture and chemically inert in nature. Basically, It is made up of two main element Silica & Oxygen. Silica sand is made up of Silicon Dioxide. There are number of different uses of silica sand in the industrial and commercial sector, from golf courses to glass making .
The chemical formula of Silica Sand is SiO2
Characteristics :
High Purity
Weather Resistant
White Appearance
Naturally Hard
Controlled Particle size
Chemically Inert
Applications
Akshar Minerals Silica sand is used depends on physical, chemical and mechanical characteristics such as grain size, shape color, structure and distribution as well as refractoriness strength and stability. There characteristics can differ depending on how mineral is processed after it is mined. This product gets easily mixed and can be used for high temperature applications like flat glass, furnace tubes and many more due to its excellent thermal expansion, hardness. It yields improved durability and burnish resistance. We make for all type of application in the industries like Glass industries, Sodium Silicate Industry, Golf course & Sport Ground, Adhesive and sealant, Rubber industry, Texture Wall Paint, Sand Blasting, Agro pesticide, Cosmetic industry, Soap & Detergent, Filtration Media, Power Plant & Petroleum, Construction Chemical Industry, Plastic, Fertilizer, Paint, Ceramic, Insulation, Foundry, Ramming Mass, Steel Industry, Landscaping, GRC & GRP Industry, Oil & Petroleum Industry, Oil Exploration & Oil Drilling.
Asbestos is a mineral that is found in natural settings such as caves and outdoor deposits. For many years it was used as an important ingredient in a large number of products, primarily for the construction industry, but it also had other applications. One such use was to create a strong fiber that could endure high temperatures and even survive fire. This made it more valuable than other materials that were used to created fiber, such as cotton or jute. Fiber that was made out of asbestos was built to last and to endure under most any circumstances.Application:
Sunflower oil is made of sunflower seeds. Quality of the future oil significantly depends on the quality of seeds, level of oil content, humidity and maturation period. Unrefined sunflower oil is purified mechanically (settled and filtrated) in most cases. Unrefined oil contains maximum quantity of vitamins and phospholipids. Unrefined oil is rich of vitamins: (tocopherol), (linoleic and
linolenic unsaturated fatty acids), (calcitriol), (retinol); it is also very healthy in raw form, for example as fresh salads dressing. Refined oil perfectly suits for frying and baking, it neither changes the taste and smell of products.
FLEXITANK
Flexitank is a flexible container which is used for the transportation and storage of liquid food, loose and bulk cargoes.
Transportation is carried out by the 20 ft dry cargo container, resulting in savings, since only the delivery costs are paid.
TANK-CONTAINER
The tank-container is a container consisting of a frame and a tank of 26 - 35 m.
BARREL AND MULTIBOX
The multibox is a plastic container, intended for transportation and storage of safe liquids.
TANK
Our tank vehicles of the European production are made of special food stainless steel. All the tanks have thermal insulation that allows maintaining the desired
temperature, and if necessary, you may heat or cool the argo during transportation.
