Inner wrap tape: t-140 (0.38mm), t-150 (0.51mm), t-165 (0.65mm), t-180 (0.8mm), t-1100 (1.02mm) and t-1130 (1.27mm) .02mm) and t-3130 (1.27mm) Thickness: 0.38 to 1.27mm Width: 50, 75, 100, 150, 230 and 300mm Length: 30 to 300m Synthetic primer: P19: solid content 19% P27: solid content 27% Export standard packing
Xunda anti corrosive tape for underground pipe wrap tape Xunda tape is mainly engaged in five series of products, which are inner tape, outer tape, joint tape, tape primer, and putty codd categories in nearly 100 specifications. They can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc. 1.1 inner tape: (anticorrosion tape, anti corrosion tape, anticorrosive tape) is for anticorrosion of underground, underwater, & overhead pipelines. 1.2 outer tape: (protection tape, protective tape) is for protection of pipe and the surface of inner tape from damages. 1.3 joint tape: (polyethylene tape, polyethylene tapes, pe tape, rubber tape, butyl tape, butyl rubber tape) is for anticorrosion of field joints, fittings, & specifically piping. Component: backing: polyethylene pe & adhesive: butyl rubber Thickness: 0.38mm to 1.27mm, Width: 50mm to 300mm Length: 30 to 300m 1.4 tape primer: (synthetic primer) complementary product covers of the rusting steel pipe and enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape. P19: solid content 19%; P27: solid content 27%.
THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.
Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles
Essential details Warranty: More than 5 years After-sale Service: Return and Replacement Project Solution Capability: total solution for projects Application: Office Building, furniture,decoation,etc Design Style: Traditional Place of Origin: AUSTRIA: Black Walnut Usage: Indoor Grade: FIRST-CLASS, AAA,AA+,AA Main Material: Poplar Formaldehyde Emission Standards: E2 Veneer Board Surface Finishing: Double-Sided Decoration Veneer Board Surface Material: Oak,ASH Size: 915mm*1830mm,915*2135mm,1220mm*2440mm Face and back: face back:OAK,ASH,Teak,black walnut, etc Hot press: two times hot press Thickness: 3mm,5mm,6mm,9mm,12mm,15mm,18mm,21mm Thickness tolerance: +/-0.3mm -0.5mm Glue: MR, E1,E2,WBP packing: pallet packing Supply Ability Supply Ability 5000 Cubic Meter/Cubic Meters per Month Packaging & delivery Packaging Details pallet packing, carton or thin plywood around, 3 times of steel tapes on width and 6 times on length, strengthened by strong pallets. Picture Example: package-imgpackage-img Lead time: Quantity(cubic meters) 1 - 1500 1501 - 2000 2001 - 5000 >5000 Lead time (days) 15 20 30 To be negotiated
1/2 in. x 15 ft. Craft Felt BOPP packing tape high density Accept small MOQ, 1, Quality is our culture. All our items coming with rohs certification. 2, With us, your money in safe your business in safe. Full refund in case of bad quality or delay delivery time. We also accept payment on PAYPAL. 3, Time is gold. For you and for us, we have professional team work whom can make nice quality in short time. 4, Quality is the soul of our company. We had the honor to serve Walmart before. If you are interested in the product, pls fel free to contact me. I will send you more catalog.
Protective tape(outer tape): Polyethene is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. The film of protective tape is thicker and higher in intensity. Preotective tape will protect the pipe and its anti-corrosion tape surface from damages. System Description :The T-200 series is cold applied tape coating systems for anticorrosion of field joints, fittings, and specifically piping. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine. Name: Outer Tape (Protection Tape, PE Protection Tape,Protective Tape, PE Protective Tape) Type:T-240, T-250, T265, T-280, T2100, T2130 Price: FOB Place of production: China Brand: Ideal Term: L/C, T/T Volume: 8,000,000sqm/yr Packing: Carton Features: The specification of the tape consists of two layers, adhesive and film Inner layer: butyl rubber Outer layer: polyethylene Thickness: 0.40 - 1.30mm Width: 50, 75, 100, 150, 230mm Length: 30 - 200m Specifications: 1) T-240 with 0.38mm / 15mil thickness and 50 - 230mm width 2) T-250 with 0.51mm / 20mil thickness and 50 - 230mm width 3) T-265 with 0.64mm / 25mil thickness and 50 - 230mm width 4) T-280 with 0.76mm / 30mil thickness and 50 - 230mm width 5) T-2100 with 1.02mm / 40mil thickness and 50 - 230mm width 6) T-2130 with 1.27mm / 50mil thickness and 50 - 230mm width Product Advantages 1 Heavy duty adhesive. 2 Conformable to irregular shapes. 3 No release liner. 4 Established in ground history. 5 Complies with AWWA (American Water Works Association) C-214 standard. 6 Compatible with general coating systems. ISO9001:2000,AWWA C-214 Standard 1,000,000 SQM/Year Carton
Polyethylene 3ply tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. It is a three-ply cold applied tape with stabilised polyethylene bcking and butyl rubber adhesive layers on both sides.It is also used as inner-layer tape. It shall be applied by hand or with a wrapping machine Features: Excellent bonding between adhesive and carrier film via co-extruded intermediate layer. Mechanically highly resistant tape system. Practically impermeable to water vapour and oxygen. Resistant to soil bacterial and soil electrolyte. Compatible with coating from PE, PP, FBE, PU, CTe and bitumen and EXT A total coating system with: High adhesion and shear resistance Resistance to corrosion disbondment High electrical resistance High dielectric strength High corrosion protection for steel substrates Iii technical datas Properties UnitT 480T 4100Test method Color carrie film Adhesive inner layer Adhesive outer layer--Black(grey/green) Black BlackBlack(grey/green) Black Blac-- Thickness carrie film Internal adhesive External ahesiveMm Mm Mm0.3 0.34 0.160.3 0.45 0.25Astm d 1000 Tensile strengthN/cm6770Astmd1000 Elongation at break%450500Astmd1000 Peel strength to pipe surface at 23 At 50N/cm 18 1.3 20 1.5En 12068 Annex c Peel strength tape to tape at 23 at 50N/cm 25 3.5 30 4.0En 12068 Annex b Dielectric strengthKv/mm3233.8Astmd149 Insulation resistanceOhm.M÷10121012En 12068 Water vapor transmissionG/ m2 /24h0.10.1Astm e 96 Brittleness temperature-464-464Din53372 Water absorption%0.1 max0.1 maxAstm d 570 Impact resistance at 23¡æJ1818En 12068 Cathodic disbandment at 23¡æc At 50¡æcMm15 3015 30 En 12068 Lap shear strength at 50N/mm20.050.05En 12068. Paper cartons packaging with waterproof menmbrane.
Origin: Malaysia CRUDE PALM OIL FLEXITANK : $860 / MT PET Bottles: $940 / MT REFINED PALM OIL FLEXITANK : $890 / MT PET Bottles: $980 / MT Order Processing Time: 10/15 Working Days, after receiving the confirmed LC / DLC MT700 OR SBLC MT760 by the Seller's Bank. Shipping Documents: 1. Signed Commercial Invoice (Including Packing Details) 2. Ocean Bill of Lading 3. SGS Certificate of Quality 4. SGS Certificate of Quantity 5. SGS Certificate of Origin 6. Phytosanitary Certificate + Non-Radioactive Certificate 7. Statement of production date and Fumigation Certificate 8. Certified HACCP 9. Euro1 / T2L 10. Kosher and Halal Certificate (if requested) 11. CCIC, CIQ, GACC, AQSIQ. All certificates for exportation to China (if requested) Procedures NON-NEGOTIABLE: 1. The Seller issues the draft contract Sales and Purchase Agreement (SPA) and sends it to the Buyer, open for any simple changes. 2. The Buyer checks the draft contract fills all the Buyer's details and coordinates of the Buyer's bank account, signs it and within 5 working days, returns it to the Seller. 3. The Seller checks the returned SPA and sends the contract countersigned with one pre-proof of product with complete CIS of the Seller. 4. The Buyer instructs his bank to issue, within 5 working days after receiving the documentation of Point 3 above, one swift bank draft or verbiage of financial instrument (MT799/199) and sends the copy of the SWIFT to the Seller. 5. The seller officially accepts the verbiage. 6. The Buyer's bank issues the final financial instrument SWIFT (MT700/ MT760) to the Seller's bank with the copy of the SWIFT to Seller. 7. The Seller prepares the product as per the order and, within 10/15 working days, delivers it to the loading port for SGS inspection and issues the of bill of lading and other shipping documents. 8. The seller sends the first delivery. 9. The Buyer and the Buyer's bank checks the shipping documents and ensures that they correspond as per the contract and Seller pays at unloading port by MT103 within 48 hours. 10. The Seller checks the payment and sends the next delivery.
Polyken-980 Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine â?¡Structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: Special blend of stabilized polyethylene III Features Excellent adhesion to pipe and self Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets ASTM D 1000 , EN 12068,AWWA C 214 Standard Cold applied
Composition:It is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue. Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation Thickness: 0.30 - 2.0 mm Width: 50, 75, 100, 150, 230,300mm Length: 30 - 200m Features: High Strength,Corrosion Protection, Excellent Adhesion pangking in carton
Yuanjinghe High Temperature Electrical Tape Manufacturer Yuanjinghe High Temperature Electrical Tape is made of Polyvinyl chloride film coated with pressure sensitive rubber adhesive,has been called electrical insulation tape or insulation tape. For preventing leakage,the high temperature electrical tape plays the role of insulation tape. It has good dielectric strength, flame retardant, voltage resistance, weather resistance and other features for connecting wires, electrical insulation protection and other features,suitable for wire wound,transformers, motors, capacitors, voltage regulators and other types of motors, electronic components insulation fixing. The High Temperature Electrical Tape Date Sheet: Material PVC Adhesive Rubber Color Black Thickness 0.12mm,0.13mm,0.15mm,0.18mm,0.2mm Width 3mm,10mm,18mm,20mm,30mm,35mm,48mm,50mm,100mm...1250mm Length 30M Tensile Strength =45N/25mm Elongation =150% 180°Peel Strength Power =3.5N/25mm Dielectric Breakdown =3KV/min Heat Resistant 80? Cold Resistant =-20? Holding Tack (1kg/25mm) =30min Insulation Resistant =1*1012 ?.cm The high temperature electrical tape applicable to various parts of the insulation resistance. Such as winding wire connectors, repair damaged insulation, transformers, motors, capacitors, voltage regulators and other types of motors, electronic components insulation protection. It can also be used for industrial processes tied, fixed, overlap, repair, seal and protect. Adhesive Tape Manufacturer adhesive tape packaging Yuanjinghe Adhesive Tape co.,Ltd is specialized in manufacturing high temperature electrical tape,our engineers to make the tape from 2008. We supply the customized services,our daily output can be up to 100,000 square meters,all of the high temperature electrical tapes are satisfy to the requires of Reach,RoHS and Halogen free.The high temperature electrical tape is not only suitable for domestic market,but also the European,American,African,Asian and the Middle East markets. There are four reasons to choose us: 1.High quality adhesive tape with competitive prices. 2.Shorted delivery time:5-15 days.Urgent and Huge orders are welcome. 3.Free Samples. 4.Record and Maintained secrecy about the information of customers’ samples or orders.
Yuanjinghe Low Tack Paper Masking Tape Manufacturer Yuanjinghe Low Tack Paper Masking tape is made of colored crepe paper coated with a pressure sensitive adhesive, another top coat to release material. The masking paper is high temperature resistant, good resistance to chemical solvents, high adhesion, softness docile and then tear without leaving adhesive residue. Industry known as textured paper pressure sensitive adhesive tape. The Features of low tack paper masking tape: ? The Masking Tape is made of crepe paper coated with pressure-sensitive adhesive and coating the surfactant. ? The Total Thickness:0.125mm±0.01mm. ? Quick paste,Easy to peel,Shredded easily broken,Easy to write. The Low Tack Paper Masking Tape Date Sheet: Material Crepe Paper Adhesive Rubber Color White Thickness 0.125mm Width 3mm,10mm,18mm,20mm,30mm,35mm,48mm,50mm,100mm...1250mm,1550mm Length 30M,50M...1500M,1800M Tack (GB/T 4852-2002) =9# Holding Tack (GB/T 4851-1998) =2.5 180°Peel Strength Power =6N/25mm Tensile Strength =28N/cm Elongation 5-14% The low tack paper masking tape applications: ? Room decoration paint covering, light dressing material, fixed light objects, remove cotton velvet, packaging. ? Automotive paint covering, paint coating masking and more. ? High temperature paint, paint and electronic industries. Adhesive Tape Manufacturer adhesive tape packaging Yuanjinghe Adhesive Tape co.,Ltd is specialized in manufacturing low tack paper masking tape,our engineers to make the tape from 2008. We supply the customized services,our daily output can be up to 100,000 square meters,all of the low tack paper masking tapes are satisfy to the requires of Reach,RoHS and Halogen free.The low tack paper masking tape is not only suitable for domestic market,but also the European,American,African,Asian and the Middle East markets. There are four reasons to choose us: 1.High quality adhesive tape with competitive prices. 2.Shorted delivery time:5-15 days.Urgent and Huge orders are welcome. 3.Free Samples. 4.Record and Maintained secrecy about the information of customers’ samples or orders.
We are company located in latvia and we manufacture flax fiber tape. Flax tape is made from a natural product - flax fiber. It is an perfect eco material for log builds embedding between logs and sealing of slits. Flax tape also can be used for: · wall, ceiling, roof, and underfloor insulation · window and door frames insulation · sound isolation · upholstered furniture making · door insulation · floors under the parquet and laminate Flax tape is easy to use and is completely safe, ecological material with good air and gas diffusion options, as well as keeps a steady level of humidity. It has a very high thermal insulation capability and soundproofing. The material does not create static electricity and does not conduct electricity. Can be cut to a width of 3 cm to 170 cm. Thickness 6, 8, 10, 15, 20 mm.
Polyethylene joint tape is cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. The joint wrap tape shall be applied by hand or with a wrapping machine. II structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene III features: Heavy duty adhesive Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Conformable to irregular shapes. Meets astm d 1000 standard Cold applied Technical datas: ItemT-365T-380T-3100T-3130 Total thickness (mm)0.640.761.021.27 Backing thickness (mm)0.280.300.350.50 Adhesive thickness (mm)0.360.460.670.77 Tensile strength (n/ cm)456080100 Elongation (%)400 450450500 Adhesion to prime pipe (n/cm)25 Dielectric strength (kv/cm)404242.545 Volume resistivity.M)2.5x10122.5x10122.5x10122.5x1012 Water vapor transmission rate24h0.1 Water absorptivity (%)0.10.1 Uv resistance 600h80 %80 %80 %80 % Application temperature -5 to 60 0 c Max serve temperature-40 to 80. Paper carton packaging with waterproof membrane.
Jumbo roll Name: jumbo roll Type: t-440, t-450, t-465, t-480, t-4100, t-4130 Price: fob Place of production: china Brand: ideal Term: l/c, t/t Volume: 8, 000, 000sqm/yr Packing: carton Features: The tape consists of two parts: 1) adhesive: inner layer of butyl rubber 2) backing: outer layer of polyethylene (pe) plastic Specifications of tape: 1) thickness: 0.40 - 1.30mm 2) width: 900mm 3) length: 30 - 200m Kg/box
Joint tape Name: joint wrap tapes for steel pipe weld bead Type: t-365, t-380, t-3100, t-3130 Price: fob Place of production: china Brand: ideal Term: l/c, t/t Volume: 8, 000, 000sqm/yr Packing: carton Features: The tape consists of two layers, which are adhesive (inner layer of butyl rubber) And film (outer layer of polyethylene). Tapes specifications: 1) t-365 with 0.65mm / 25mil thickness and 50 - 230mm width 2) t-380 with 0.76mm / 30mil thickness and 50 - 230mm width 3) t-3100 with 1.02mm / 40mil thickness and 50 - 230mm width 4) t-3130 with 1.27mm / 50mil thickness and 50 - 230mm width 5) thickness: 0.40mm - 1.30mm 6) width can be 50mm, 75mm, 100mm, 150mm, 230mm 7) length: 30 - 200m 38kg/carton
Outer tape Name: outer wrap tape for steel pipe fitting Type:t-240, t-250, t265, t-280, t2100, t2130 Price: fob Place of production: china Brand: ideal Term: l/c, t/t Volume: 8, 000, 000sqm/yr Packing: carton Features: The specification of the tape consists of two layers, adhesive and film Inner layer: butyl rubber Outer layer: polyethylene Thickness: 0.40 - 1.30mm Width: 50, 75, 100, 150, 230mm Length: 30 - 200m Specifications: 1) t-240 with 0.38mm / 15mil thickness and 50 - 230mm width 2) t-250 with 0.51mm / 20mil thickness and 50 - 230mm width 3) t-265 with 0.64mm / 25mil thickness and 50 - 230mm width 4) t-280 with 0.76mm / 30mil thickness and 50 - 230mm width 5) t-2100 with 1.02mm / 40mil thickness and 50 - 230mm width 6) t-2130 with 1.27mm / 50mil thickness and 50 - 230mm width 38 kg /carton
Colostomy Bag Flange Two Piece Cutting Size: 15-57mm MED-51405 Description Hydrocolloids + adhesive tape border. Friendly to skin. Flexible and convenient fastener system.
Jute tape real selvedged, 7x7, made with 10lb single ply yarn, both sides real selvedged, 20 mtrs roll, we are useing 10lb single ply to make the jute tape stronger. Packed in carton box and or pp bags. Packing 10cm x 45 rolls per box 15cm x 30 rolls per box 20cm x 30 rolls per box 30cm x 18 rolls per box 40cm x 15 rolls per box 60cm x 9 rolls per box 100cm x 6 rolls per pp bag 120cm x 6 rolls per pp bag