Iodophor Ingredients: Iodine, dimethyl dodecyl amine oxide, quaternary ammonium salt, non-ionic surfactant, etc. Raw Material Assay: Iodine 5% The common name of the preparations: Iodine trioxide Administration & Dosage of the Preparations: Iodine 3%. Characterization Appearance and usage Reddish brown sticky liquid; its aqueous solution is acidic, foams produce when shaken. It is easily soluble in water or ethanol. It can be dissociated into cationic active species with reactive oxygen and active iodine in the aqueous solution, which has cleaning function. Pharmacological effects It is the complex compound of four alkyl amine reactive oxygen species and iodine, added the special synergist. It is stable and has no impurity. Precautions The preparations wrappers: should be fitted with brand new dark PET/HDPE with plastic inner lid. The Process of making preparations: when you fill the dilution into the container, the foam will be produced. Therefore, the self-priming filling machine is not appropriate. Please be attention the requirement of the preparation's pH value. The requirement of water quality: deionized water would be best. Don't make it with the high hardness tap-water and alkaline water.
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation. Packing 25kg PVC bags+1MT big bag or as customers'requested Trade terms FOB CNF CIF Payments terms 1).T/T 30%advance , 2).the balance against copy of B/L Delivery time After we receive deposit within 7-10days Sample Sample is free within 1kgs
N-hexadecyl trimethyl ammonium chloride or cetyl trimethyl ammonium chloride (CTAC) is a topical preservative and surfactant Product name Cetrimonium Chloride Alias Hexadecyltrimethylammonium chloride CAS 112-02-7 Specification 99% Appearance White powder grade Cosmetic grade Shippment Express (DHL/FedEx/EMS etc); By air or Sea store Shading, sealed and preserved Shelf life 2 years Package 1 kg/bag 25 kg/barrel CAS 112-02-7 cetrimonium chloride conditioner cetrimonium chloride uses Item Specifications Appearance (50) Colorless transparent liquid Pale yellow to colorless transparent liquid White to off-white powder Active Assay 30%±1% 50%1% 99% Free amine 1% 1% 2% Water% 70% 50% 0.5% Packing & Delivery # About Samples 1) Liquid samples are packed in fluorinated bottles and are divided into 1kg and 500g. Solid samples is packed in aluminum or sample plastic bags. 2) Shipping by FEDEX/DHL/EMS ,about 7-15 days #About packages. 1) For the packaging of solid products, we have three types of packaging based on value: fiber drum, carton, plastic woven bag/PP bag.
1. Brief Introduction The chemical fertilizer Urea, npk contains midium Potassium and low Phosphorus in proportions. The nutrients are long and slow released and supplied. The pure natural Sulphate Potassium we added into the fertilizer is from Lop Nor Lake, which is a token of high quality. 2. Features 1) Upgraded nutrition: abundant inorganic nutrients, combined with premium organic nutrients, make extraordinary fertilization. 2) Disease resistance: the chelated trace elements are able to reduce nutrient deficiency diseases. 3)Root developing and soil enriching: the imported humic acid and amino acid will help rooting and soil enriching. 3. Application Range It is used for all fruit trees and vegetables. 4. Appliction Method and Amount It is used as base fertilizer and additional fertilizer, 40-80 kg per acre. Improper handling will cause injury for crops because of biuret. Keep separate with seeds. 5. Packing and Storage 1. Description of Urea Fertilizer 46 Nitrogen UREA is a spherical white solid. It is an organic amide molecule containing 46% nitrogen in the form of amine groups. UREA is infinitely soluble in water and is suitable for use as an agricultural and forestry fertilizer as well as for industrial applications which require a high quality nitrogen source. It is not a poison to mammals and birds and is a benign and safe chemical to handle. 2. Advantages of fertilizer urea Urea can be applied to soil as a solid or solution or to certain crops as a follar spray. Urea usage involves little or no fire or explosion hazard. urea's high analysis , 46 % N, helps reduce handling , storage and transportation costs over other dry N forms. Urea manufacture releases few pollutants to the environment. Please store at cool and dry place. No swallowing.
Appearance Colourless to light yellow liquid Colour 3G Max Average Molecular Weight (Avg Mw) Approx. 360 Solid Content % - 35-38% Active Matter % - 38-32% Ph 10% Solution 5-7 Chloride As (NaCl) 7% max Free Amido amine 0.5 % Max Density at 20’C (G/cm3) Approx. 1.05
ED-900 Polyether Amine Chenhua ED-900 Polyether amine is an aliphatic polyether diamine derived from a propylene oxide-capped polyethylene glycol. It is water soluble, with an approximate molecular weight of 900 and a melting point around room temperature. Polyether amines of this type are useful in a variety of polymers because of the hydrophilicity and flexibility imparted by the polyethylene glycol chain. In polyamides, for example, antistatic properties and moisture vapor transmission can be enhanced by incorporation of PEG-based polyether amines. Chemical Structures: NH2CH(CH3)CH2-[0CH(CH3)CH2]x-[OCH2CH2]y-[OCH2CH(CH3)]z-NH2 Yâ??12.5ï¼?ï¼?X+Zï¼?=6 Physical Property: ï¼?Appearance(60â??): Colorless to light yellow with slight haze ï¼?Color, Pt-Co 75 max ï¼?Primary amine, % of total amine 95 Min ï¼?Total amine, meq/g 1.80min-2.25max ï¼?Water, wt% 0.35 max ï¼?CAS No: 65605-36-9
ED-2003 Polyether Amine Chenhua ED-2003 Polyether Amine is a water soluble aliphatic diamine derived from a propylene oxide capped polyethylene glycol. It is a waxy solid at room temperature with an approximate molecular weight of 2000. Structure: NH2CH(CH3)CH2-[0CH(CH3)CH2]x-[OCH2CH2]y-[OCH2CH(CH3)]z-NH2 Yâ??39ï¼?ï¼?X+Zï¼?=6 Physical property: ï¼?Appearance: white waxy solid ï¼?Color Pt-Co: 75 max ï¼?Primary amine content ï¼? of total amine 95 min ï¼?Total acetylatables, meq/g 0.90min-1.05max ï¼?Total amineï¼? meq/g 0.90min-1.05max ï¼?Water, wt% 0.35max Applications: ï¼?Hydrophilic polymers ï¼?Antistatic agents ï¼?Epoxy modifiers ï¼?Textile treating ï¼?Water-based coatings ï¼?Water-soluble, water-dispersible, water-swellable polyamindes ï¼?Water-soluble polyureas
Polyether amine FL-1000 FL-1000 is the raw material of gasoline detergent, FL-1000 is a monoamine polymerized by nonyphenol and propylene oxide, molecular weight is about 1000, flash point is 193.3, density is 1.01g/cm3. Physical index: Appearance: colorless liquid Viscosity 25â?? m Pa.s 100-300 Amine value: 0.95-1.11 Water%:0.2%max
Product Name: S-Acetyl-L-glutathione Other Name: S-acetylglutathione Molecular Formula: C12H19N3O7S Molecular Weight: 349.36 Appearance: White powder Purity: 99% CAS NO.: 3054-47-5 EINECS No.: 221-275-5 Supplier: ZHENYIBIO S-Acetyl-L-Glutathione is a tripeptide that contains an unusual peptide linkage between the amine group of cysteine and the carboxyl group of the glutamate side-chain. S-Acetyl-L-Glutathione has strong effects of antioxidant, preventing damage to important cellular components caused by reactive oxygen species such as free radicals and peroxides.
This product is one of the few kinds of antioxidant, which is non-toxic, tasteless, light colored. Widely apply in each kind of elastomer. It can be used in polyethylene, polypropylene, polyvinyl chloride and other plastic masterbatch. It may use as the urethane foam as well as the electric wire, the electric cable, packaging material for food, the adhesive antioxidant, especially for heat-resisting , lightfastness, ageing resistance in the neoprene colored cable sheath, antioxidant KY-445 is are remarkable. It can use as lightfastness and ageing resistance antioxidant in the polyether and foam, and also as lubricant antioxidant. It's specially effective to protect neoprene, polyacrylate rubber, polyether polyol and so on from ageing resistance because of high fever, light and some other factors. It has good cooperative effect with the sulf-antioxidant.
Stryker Corporation is a well-known company that produces a variety of medical devices, including surgical instruments and equipment. PEEK (Polyether Ether Ketone) is a high-performance thermoplastic polymer that is used in various medical applications, including surgical instruments. Here are some general considerations: Material - PEEK: PEEK is known for its biocompatibility, strength, and resistance to wear and tear. It is commonly used in medical devices due to its advantageous properties. Monopolar Handle: A monopolar handle is typically part of an electrosurgical system used in various surgical procedures. It is the component that connects to an electrosurgical instrument, allowing the surgeon to control the application of electrical energy during the procedure. Applications: Instruments with PEEK monopolar handles could be used in a range of surgical specialties, including orthopedics, neurosurgery, and other areas where precision and durability are important.
Oil field chemicals like demulsifiers, corrosion inhibitors, neutralizing amines, antifoulants, antifoamers, water treatment chemicals, waste water treatment chemicals..
Amine-terminated polyether Zhengda® zd-123 Zhengda® zd-123 amine-terminated polyether is characterized by repeating oxypropylene units in the backbone.As shown by the representative structure, zhengda® zd-123 amine-terminated polyether is a difunctional, primary amine with an average molecular weight of about 230. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chain. Applications Epoxy curing agent Reacts with carboxylic acids to form hot melt adhesives Reacts quickly with isocyanates Salts may be formed readily for surfactant use Benefits Low viscosity, color and vapor pressure Completely miscible with a wide variety of solvents, including water Provides tough, clear, impact resistant coatings, castings, and adhesives Coatings are free of surface blush prevalent with many amine curing agents Sales specifications Property specifications Appearance colorless to pale yellow liquid With slight haze permitted Color, pt-co 25 max. Primary amine, % of total amine 95 min. Total amine, meq/g 8.1 – 8.7 Water, wt% 0.25 max. Additional information Ahew (amine hydrogen equivalent wt.), g/eq 60 flash point, pmcc, °c (°f) 121 (250) Equivalent wt. With isocyanates, g/eq 120 ph, 5% aqueous solution 11.7 Viscosity, cst, 25°c (77°f) 9.5 refractive index, nd20 1.4466 Density, g/ml (lb/gal), 25°c 0.948 (7.90) vapor pressure, mm hg/°c 1/100 Cas number 9046-10-0 10/133 Products packaged/shipped Drum 195 kgs net wt. Iso tank appro. 23, 000.00 kgs net wt. Ibc 942 kgs net wt.
Amine-terminated polyether Zhengda® zd-140 Zhengda® zd-140 amine-terminated polyether is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, zhengda® zd-140 amine-terminated polyether is a difunctional, primary amine with average molecular weight of about 430. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains. Applications Epoxy curing agent that provides increased flexibility and toughness Used in polyurethanes, polyureas, and thermoplastic polyamide adhesives Salts may be formed for use in cutting fluids Benefits Low viscosity, color and vapor pressure Completely miscible with a variety of solvents Sales specifications Property specifications Appearance, 25°c colorless to pale yellow liquid With slight haze permitted Color, pt-co 50max. Primary amine, % of total amine 95 min. Total amine, meq/g 4.0 – 4.6 Water, wt% 0.25 max. Additional information Ahew (amine hydrogen equivalent wt.), g/eq 115 ph, 5% aqueous solution 11.6 Equivalent wt. With isocyanates, g/eq 230 refractive index, nd20 1.4482 Viscosity, cst, 25°c (77°f) 22 vapor pressure, mm hg/°c 1/165 Density, g/ml (lb/gal), 25°c 0.972 (8.10) 10/193 Flash point, pmcc, °c (°f) 163 (325) cas number 9046-10-0 Products packaged/shipped Drum 200 kgs net wt. Iso tank appro. 23, 000.00 kgs net wt. Ibc 1000 kgs net wt.
Amine-terminated polyether Zhengda® zd-1200 Zhengda® zd-1200 amine-terminated polyether is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, zhengda® zd-1200 amine-terminated polyether is a difunctional, primary amine with average molecular weight of about 2000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains. Applications Key ingredient in the formulation of polyurea and rim Co-reactant in epoxy systems which require increased flexibility and toughness Benefits Low viscosity, color and vapor pressure Improved flexibility from high molecular weight polyether backbone Increases peel strength Sales specifications Typical property specifications Appearance colorless to pale yellow liquid Color, pt-co 25max. Primary amine, % of total amine 95 min. Total amine, meq/g 0.93 – 1.05 Water, wt% 0.25 max. Additional information Typical physical properties Ahew (amine hydrogen equivalent wt.), g/eq 514 flash point, pmcc, °c (°f) 185 (365) Equivalent wt. With isocyanates, g/eq 1030 ph, 5% aqueous solution 10.5 Viscosity, cst, 25°c (77°f) 248 refractive index, nd20 1.4514 Density, g/ml (lb/gal), 25°c 0.991 (8.26) vapor pressure, mm hg/°c 0.93/235 Cas number 9046-10-0 4.95/254 Products packaged/shipped Drum 200 kgs net wt. Iso tank appro. 23, 000.00 kgs net wt. Ibc 1000 kgs net wt.
Amine-terminated polyether Zhengda® zt-143 Zhengda® zt-143 amine-terminated polyether is characterized by repeating oxypropylene units in the backbone.As shown by the structure, zhengda® zt-143 is a trifunctional primary amine having an average molecular weight of approximately 440. Its amine groups are located on secondary carbon atoms at the ends of aliphatic polyether chains. Applications Epoxy curing agent Anti-sag agent for polyurethanes Benefits Low color and vapor pressure Completely miscible with a wide variety of solvents, including water Improves flexibility and strength Sales specifications Property specifications Appearance colorless to pale yellow with slight haze Color, pt-co 50max. Primary amine, % of total amine 90 min. Total amine, meq/g 6.1 – 6.8 Water, wt% 0.25 max. Additional information Ph, 5% aqueous solution 11.6 ahew (amine hydrogen equivalent wt.), g/eq 81 Refractiveindex, nd20 1.46 viscosity, cst, 25°c (77°f) 72 Vapor pressure, mmhg/°c 1/181 density, g/ml (lb/gal), 25°c 0.978 (8.12) 5/207 flash point, pmcc, °c (°f) 196 (385) Cas number 39423-51-3 Products packaged/shipped Drum 200 kgs net wt. Iso tank appro. 23, 000.00 kgs net wt. Ibc 1000 kgs net wt.
Amine-terminated polyether Zhengda® zt-1500 Zhengda® zt-1500 amine-terminated polyether is a trifunctional primary amine of approximately 5000 molecular weight. It is clear, almost colorless, viscous, liquid product. Applications Crosslinker for polyurea Co-reactant in epoxy sytems where adhesion promotion and flexibility are important Surfactant and corrosion inhibitor applications Benefits Low color Increased peel strength in epoxy adhesives Increased toughness Sales specifications Property specifications Appearance colorless to pale yellow liquid With slight haze permitted Color, pt-co 25max. Primary amine, % of total amine 97 min. Total amine, meq/g 0.5 – 0.57 Water, wt% 0.25 max. Additional information Ahew (amine hydrogen equivalent wt.), g/eq 952 flash point, pmcc, °c (°f) 213 (415) Equivalent wt. With isocyanates, g/eq 1904 density, g/ml (lb/gal) , 25°c 0.997 (8.31) Viscosity, cst, 25°c (77°f) 819 cas number 64852-22-8 Products packaged/shipped Drum 200 kgs net wt. Iso tank appro. 23, 000.00 kgs net wt. Ibc 1000 kgs net wt.
THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.
Product Name: Sodium Lauroamphoacetate(SLA-40) Type: Cosmetic raw materials Origin: China CAS No.: 156028-14-7 AUCO No.: 440 Packing: 200kg drum Items Standard Appearanceï25 Yellow transparent liquid Gardner 3.0 pH(10% water solution) 8.5-9.5 Solid content,% 40.0±2.0 Sodium chloride content ,% 7.5 Residual amine content,% 1.0 Hydroxyacetic acid,% 1.8 Monochloroacetic acid(ppm) 100
Product Name: Lauryl Hydroxysultaine(HSB-12) "Type: Cosmetic raw materials Origin: China CAS No.: 13197-76-7 AUCO No.: 428 Packing: 200kg drum" Items Standard Appearance slightly yellowish liquid,no odor pH(1% water solution) 6.0-8.0 Free amine,% 1.0 Solid content,% 45.0 Effective substance,% 30.0±2.0 Sulfate ash,% 13.0 Quaternary ammonium salt,% 4.0 Sodium chloride content ,% 6.0-8.0 Acid value(mgKOH/g) 2.0
![Bis[4-(2-phenyl-2-propyl)phenyl]amine](https://didwblovvwmoz.cloudfront.net/product_images/4127346/1748733/compressed/featured_image/3bb27e53c442d8830d35fd1f0d70_900_900.jpeg?format=webp)
