Pet Extrusion Machine Suppliers and Manufacturers

The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump. The features of this technology: 1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar; 2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding; 3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines; YJ650 stamping equipment 4.No flammable gases, not affected by rainy or cold weather; 5.Relieve congestion of the connecting point, facilitated concrete pouring; 6.No professional and experienced worker needed, able to connect changed steel bar of different diameters; 7.Save 80% of connector steel consumption. The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."

Plastic Teflon PTFE Rod Extruder Machine For PTFE Rod( 4-20mm) This PTFE extruder is able to extrude rod which dia from 4mm to 20mm. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Ram extrusion machine for Teflon rod The China vertical RAM Extruder Machine is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould.Range of diameter PTFE Extrusion 4 to 20 mm, Heating zones 4-6 zones.The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: physical property , like Specific Gravity and Elongation, outside of PTFE rod diameters and PTFE product heating length.PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Rod Extruder Dia 4mm-20mm Technical Data Description Model No. Machine model PFLB-20 Plastic Extruder PTFE Power 12 kw Min - Max Dia 4-20 mm Tolerance 0-0.2mm+ Length Unlimited Production Per Hour 7-14kg Electricity Consumption Per hour 2 kw Weight of the Machine 930 kg High of the Machine 2150 mm Floor area of the Machine 3.5 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 s Deliver LT 30 Days Features 1, Automatic control 2, Easy to operate 3, Low power consumption 4, Product size stability 5, Precise sintering 6, Environment-friendly and Energy-saving Application: PTFE RAM Screw Extruder products rod, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the rod has a wide range of applications

Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min. Wooden cases

Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products. Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products. Main technical data: Model lmsg-65 lmsg-90 Pipe size(mm) d16-63 d75-160 Screw diameter(mm) d65 d90 L/d 30: 1 30: 1 Screw rotation speed(rpm) 0-90 0-75 Capacity(kg/h) 120-160 180-220 Hauling speed(m/min) 0-13 0-10 Cutting means: saw blade or non-scrap cutting Pipe length control: electron counting or electrical switch control. Wooden case or other moistureproof packages

Raw material+ carbon - mixing-- vacuum feeding -- material dryness -- single screw extruder -- steel wire unlocking -- extrusion mould-- spiral calibrator -- spray vacuum tank -- belt haul-off -- manual cut -- winder -- finished product inspecting & packing Model: lspe-75 lspe-90 Screw diameter: 75mm 90mm L/d: 30: 1 30: 1 Pipe range: 50-150 75-200 Capacity: 80-110 150-250 Main motor power: 55 90 Total power: 70 130 Line length: 15 18. Wooden cases or wood pallets