Pbtc Atmp Suppliers and Manufacturers

Citric acid, DCP, MCP, sodium cyclamate, potasium sorbate, sorbic acid, sodium benzoate, benzoic acid, HEDP, ATMP, PBTC, HPMA, phosphorous acid, hypophosphorous acid, polyphosphoric acid, zinc oxide, zinc chloride, sodium bromide, ammonium chloride.

ATMP, HEDP, EDTMPA, PBTC, PAPA etc. We have various kinds of scale inhibitors, tell us what you need and we will provide it with good quality.

Apermaking chemicals (AKD wax and its additives, surface sizing agent, cationic rosin sizing, wet/dry strength agent, retention and filter aid chemicals, water resistant agent, lubricant ), water treatment chemicals (HEDP, ATMP, PBTC, EDTMPA, HPMA, MA/AA, decoloring agent and pam) and pesticide chemicals.

Akd wax is pale yellow waxy flake solid which is widely used in the paper industry as sizing agent. Our akd wax is a neutral sizing agent which can directly react to fiber with high content and i2, assay and low acid, and is more efficient sizing agent without organic impregnant like toluene¯benzene¯ and so on. After sizing with akd emulsion, it can make paper less water absorbing and controls its printing properties. It is welcomed by the paper mills all over the world.

Appearance: yellow amber liquid Purity: 40%(+/-0.5%) solid content Application: it has the function of akd emulsified?colloid pretection, retentiom aiding and synergism and so on, can apply to various paper grades.

Cationic polyacrylamide (cpam) Introduction This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid. Specification Product:pam Solid content:min. 88% Ionicity:cationic Appearancewhite fine-sand shaped powder Molecular weight:6million-10million Ion concentration:20%30%40%50%-80% Shelf life:24 months Application 1.This product is mainly used for the sludge dewatering to decrease moisture content of sludge. 2.This product is used in the treatment of industrial wastewater and municipal wastewater. 3.This product can be used for papermaking to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings. Application method 1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water. 2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60. Package and storage Packed in 25kgs woven bag with polypropylene. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.

Appearance: pale yellow and viscous liquid, cationic Purity: 12.5% solid content This product can be used both in neutral and in alkalescent conditions.It can make the paper settled with higher stability in its sizes, which is with many advantages, such as wide ph applications, nontoxic, excellent absorbenct, higher dry/wet intensity, surface intensity, burst and excellent ink-absorbing ability etc.

Anionic polyacrylamide (apam) Introduction This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid. Specification Product:apam Solid content:min. 88% Ionicity:anionic Appearance:white fine-sand shaped powder Molecular weight:15million-20million Ion concentration:8%15%25%40% Shelf life:24 months Application 1.This product can be used to treat industrial wastewater and mining wastewater. 2.This product can also be used as additives of the mud materials in oil-field, geological drilling and well boring. Application method 1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water. 2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60. Package and storage Packed in 25kgs woven bag with polypropylene. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.

Introduction This surface sizing agent for kraft & corrugated paper has the advantages of less dosage, lower cost and easier operation. It can significantly improve the water-resistance and ring crush strength Of board paper, corrugated paper and fine paper. Specification Appearance: white to light brown liquid Ph value: 3-5 Solid content: 30%(±2%) Water solubility: easy Viscosity: max. 30 cp. S(25) Ionicity: cationic Shelf life: 6 months Package and storage Packed in 200kg or 1000kg plastic drum. The product should be stored under the condition of 4-25, and the proper temperature should be below 30. Notice Application temperature should be below 75.

Appearance: Brown or Amber Liquid Purity: 25%(+/-0.5%) Solid Content Application: It has the function of AKD emulsified colloid pretection, retentiom aiding and synergism and so on, can apply to various paper grades.

Appearance: Light green yellow to white powder Solubility: Easily soluble in hot water PH Value:

Appearance: clear liquid, amphoteric Purity: 15% &20%solid content Application: it is the copolymer of acrylamide and acrylic acids, especially suitable to kraft paperboard and corrugated paper.

Properties: ATMP has an excellent chelation, a low threshold inhibition and a lattice distortion ability. It functions to prevent scale formation, calcium carbonate in particular, in water system. It has a good chemical stability and is hard to be hydrolyzed in water system. At high concentration. It has a good corrosion inhibition. It is used in industrial circulating cool water system of thermal power plant and oil refinery plant. Atmp can decrease scale formation and inhibit corrosion of metal equipment and pipeline. It can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of atmp is crystal powder, soluble in water, easily dissolvable, suitable for usage in winter and freezing districts. Due to its high purity. It can be used in woven & dyeing industries and as metal surface treatment agent. Package and storage: Liquid: normally in 200l plastic drum, IBC (1000l) can also be used as required Solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by customers. Storage for 10 months in a cool and dry place.

Properties: ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification: items index Appearance Colorless or light yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95 min Chloride (as Cl-)% 2.0(or1.0) min 1.0 min pH value (1% solution) 2.0 max 2.0 max Fe (as Fe3+) (ppm) 20 20 Density (20¡æ) g/cm3 1.33 min Colour APHA (Hazen) 40 max Usage: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. Package and Storage: ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.

CAS: 6419-19-8 Molecular Formula: N(CH2PO3H2)3C Molecular weight: 299.05 1, Properties and usage ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. in water system ,it can prevent scale formation, particularly for calcium carbonate. in water, ATMP has good chemical stability and is hard to be hydrolyzed. At high concentration, it has good corrosion inhibition. ATMP can be used in thermal power plant, recirculated cooling water of oil refinery, and recycle waterflood system of oilfield.. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, easily soluble in water, easy moisture absorption, particularly suitable for using in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. 2, Specification: ITEMS Index Appearance Colorless or light yellow transparent liquid Whitecrystal powder Active content (asATMP) % ¡Ý 50.0 50.0 92.0 Phosphorous acid (as PO33- )% 5.0 3.5 -- Phosphoric acid (as PO43- )% 1.0 0.8 0.8 pH (1% Water Solution) 1.5-2.5 1.5-2.5 ¡Ü2.0 Chloride (as CL- )% 3.5 2.0 2.0 Fe(as Fe3+) ppm ¡Ü -- 20.0 20.0 Density (20oC) g/cm3¡Ý 1.28 1.30. 3, Application range&using method:ATMP is usually used together with other organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The recommended dosage is 5-20mg/L. As corrosion inhibitor, The recommended dosage is 20-80mg/L. 4,Safety Protection:ATMP is Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.

ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Appearance : Colorless or light yellow transparent liquid Active acid % : 48.0-52.0 Chloride (as Cl-)% : 2.0(or1.0) min pH value 1 solution : 2.0 max Fe (as Fe3+) (ppm) : 20 Density 20¡æg/cm3 : 1.33 min Colour Alpha (Hazen) : 40 max.

ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification: items index Appearance Colorless or light yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95 min Chloride (as Cl-)% 2.0(or1.0) min 1.0 min pH valueú¿1úÑ solutionú¬ 2.0 max 2.0 max Fe (as Fe3+) (ppm) 20 20 Density ú¿20íµú¬g/cm3 1.33 min í¬ Colour APHA (Hazen) 40 max Usage: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.