Anti-movement, good low-perfusion performance. Pop-up menu to setup alarm limits Small in volume light in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Pulse waveform display The display mode can be changed A pulse rate sound indication With measured data overruns limits and low-voltage alarm function Battery voltage indication Automatically power off function Display format and alarm limits can be saved after power off.
Mericonn Fingertip pulse oximeter for household or travel function: LCD display, 8 second fast measurement, 5 second automatic shutdown without detection low power prompt pulse rate display About fingertip oximeter The blood oximeter uses non-invasive infrared measurement technology to measure the oxygen content in fingers, toes and ears, which is the most common place to measure blood oxygen. The more accurate name of the measurement object is blood oxygen saturation, namely SpO2. The measured results are expressed in digital form. The main display is the ratio of total oxygen saturation under the actual oxygen content, which is generally expressed in percentage. The typical blood oxygen saturation of human health is 90~100%, But at least 60% can be passed.
Technical Parameters Display Mode : double Color OLED display SPO2 measuring range: 35-100% Pulse Ratio:30-240 BPM Pulse Waveform display: bargraph display Battery indication: OLED display Power Requirements: 1.5V(A A A size )Alkali Batteriesí-2 Adaptable range:2.6V-3.6V Working current:í_20mA Resolution: SPO2 : 1% Pulse Rate: 1bpm Accuracy: SPO2 :70% to 100% í+2digits,below 70% unspecified Pulse rate:í+2bpm or í+ 2%(select larger) Measurement at Low Perfusion: The values of SPO2 and pulse rate can be displayed properly when pulse saturation is at 0.4%. Accuracy of SPO2:í+4% Accuracy of Pulse Ratio.í+2BPM or í+2% (Select Larger) Resistance to surrounding light: Deviation is smaller than í+1% between value of Oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room. Automatic shutdown function: The device will power off automatically within 5 seconds when there is no finger in the device. When working, the display direction can be changed by pressing the button shortly. There are six modes of direction. In working term, long press can change the lighteness of the screen.
Technical Parameter: Display Format: LCD SPO2:35-99% Pulse Ratio:30-255 BPM Pulse Wave: LCD Numeric Display Battery Voltage Low Indication: LCD Bar Graph. Power Requirements: Two AAA size 1.5V Alkaline Batteries Power Consumption: less than 15 mA. Resolution: 1% for SPO2 and 1 BPM for Pulse Rate. Measurement Accuracy: í+2% in stage of 70%-99% for SPO2 Unspecified in stage of 35-69% for SPO2 í+2BPM or í+2%(Select Larger)for Pulse Rate. Measurement Performance in Low Perfusion: SPO2 and pulse & rate can be shown correctly when pulse-perfusion ratio is 0.4% Interference Resistance Capacity against Ambient Light : Deviation is smaller than í+1% It is equipped with a function switch, through which the Oximeter can be automatically powered off when no finger is in the Oximeter more than 4 seconds
Lepu PC-60F fingertip pulse oximeter. It can store up to 12 groups of SpO2 data in the built-in memory. When low oxygen level or abnormal heartbeat is detected, visual and audible alert will remind you. In stock in both Belgium and China.
The Zacurate Fingertip Pulse Oximeter is manufactured according to the standards set for sporting and aviation pulse oximeters. Our product is designed for sports enthusiasts, pilots or anyone who wants to obtain their SpO2 (Blood Oxygen Saturation Levels) and PR (Pulse Rate) on the go or at home. The pulse oximeter LED display now faces the user so that the user can read it easily. Taking a reading is easy, just clip it on to your finger and turn it on at the press of a button. The large LED display makes viewing the results a snap. Its small size makes it easy to carry around and a lanyard is also included for added convenience. Comes with 2 AAA batteries so that you can use it immediately upon arrival. This device is for Sports & Aviation use only and is not a medical device.
High Quality Portable Digital OLED Fingertip SpO2 Pulse Oximeter BX-22 Features: -OLED display: Dual Color OLED display. Better shows the data. -Multi-direction display: Rotatable multidirectional display. 4 directions, 6 modes, allow you to view your results in any direction. -Alarm function: Set the alarm and beep according to your needs. There will be a warning once the measured values go beyond the setting. Know it immediately. -With case: Small in volum, light in weight, convenient to carry. With a landyard and carrying case, convenient to use and to storage -Long battery life: 1) Low-power consumption, continuously work for 6 hours. 2)In the absence of signal, the product will be in after 8 seconds to enter standby state. Specifications: SpO2: Measurement range: 70~99% Resolution: 1% Accuracy: +/- 2% (70%~99%), unspecified (
Mericonn portable oxygen level reader Manufacturer TFT display Fingertip Pulse Oximeter function: new design 8 second fast measurement 5 second automatic shutdown without detection low power prompt pulse rate display About fingertip oximeter The blood oximeter uses non-invasive infrared measurement technology to measure the oxygen content in fingers, toes and ears, which is the most common place to measure blood oxygen. The more accurate name of the measurement object is blood oxygen saturation, namely SpO2. The measured results are expressed in digital form. The main display is the ratio of total oxygen saturation under the actual oxygen content, which is generally expressed in percentage. The typical blood oxygen saturation of human health is 90~100%, But at least 60% can be passed.
Mericonn display Fingertip Pulse Oximeter SPO2 PR PI model:PO 102 function: TFT color screen LCD display, 8 second fast measurement, 5 second automatic shutdown without detection low power prompt pulse rate display About fingertip oximeter The blood oximeter uses non-invasive infrared measurement technology to measure the oxygen content in fingers, toes and ears, which is the most common place to measure blood oxygen. The more accurate name of the measurement object is blood oxygen saturation, namely SpO2. The measured results are expressed in digital form. The main display is the ratio of total oxygen saturation under the actual oxygen content, which is generally expressed in percentage. The typical blood oxygen saturation of human health is 90~100%, But at least 60% can be passed.
CE FCC Approved SpO2 Bluetooth Fingertip OLED Pulse Oximeter Blood oxygen pulse within reach Small and portable one-key measurement 1.One key measurement Simple and convenient operation 2.HD LED TFT display 3.High-performance accelerated design The measurement time is only 8 seconds 4.Automatic shutdown without measurement response within 20 seconds 5.Photoelectric sensor Fast and accurate measurement 6.Multiple shading design Effectively reduce external interference
VERY ACCURATE READINGS - Our pulse oximeter has been clinically tested and consistently beat other pulse oximeter in terms of accuracy and reliability, it is found to be a fast and absolutely reliable gadget to use. It is ideal for the oxygen and pulse readings, and have a very small error margin. FAST AND EASY OXIMETER READINGS - Taking your oxygen and pulse readings with this digital oximeter is as simple as pressing a button. BRIGHT & COMPACT - Bright OLED display allows clear reading in dark, inside home or in bright sunlight. Oxygen saturation monitor shows real time Pulse Rate, Pulse Rate Bar and SpO2 level. Light Weight, Easy to carry & Accommodates wide range of finger sizes. LIGHT, COMPACT & LONG BATTERY LIFE- Light and compact, accommodates wide range of finger sizes, long battery life, automatic power off after 10 seconds.
Product operation scope : The fingertip oximeter can be used to measure human hemoglobin saturation and heart beat through finger. The product is suitable for use in family, hospital (including clinical use internist/surgery, anesthesia, pediatrics, intensivecare and etc), oxygen bar, social medical organizations, physical care in sports (it can be used before or after sports. Continually monitoring is not commended). Technical parameters: Display format: led spo2:35-99% in two-digit 7-segment digital;pulse ratio:30-240bpm in 3-digit 7-segment digital;pulse wave: 6-segment bargraph;battery voltage low indication: led signals.-fff Power requirements: two aaa size 1.5v alkali battery;ffff Power consumption: less than 40ma.-f Resolution: f+1% for spo2 and f+1 bpm for pulse ratio. Measurement accuracy: f+2% in stage of 70%-99% spo2 and meaningless when stage being smaller than 70%. -+2 bpm for pulse ratio. Measurement performance in weak filling condition: oxyhemoglobin and pulse value can be shown correctly when pulse-filling ratio is 0.5%. Interference resistance capacity against ambient light: deviation is smaller than f+1% between value of oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room. Product properties : Operation of the product is simple and convenient.-fff The product is small in volume, light in weight (total weight is about 50g including batteries) and convenient in carrying.-fff Power consumption of the product is low and the two originally equipped two aaa batteries can be operated continuously for 30 hours.-fff Low voltage warning will be indicated in visual window when battery voltage is so low that normal operation of the oximeter might be influenced.-fff The product will automatically be powered off when no signal is in the product for more than 8 seconds. Suitable for adult and pediatric patient 0.15kg/pc
Model Number: AS-303 Instrument classification: Class II Product name: Fingertip Pulse Oximeter Color: Pink / Blue Application: Fingertip Size: 56*34*32MM Net weight: 50g Display way: Color OLED displays Operation mode: intermittent operation Battery: 2*AAA Alkaline Battery Usage: Househould Product Features: 1: HD color OLED display (using OLED LED production of high-definition color display) 2: the acceleration sensor (Kefu oximeter using high performance acceleration sensor, the measurement time is shortened, only need 8 seconds) 3: one key operation (more simple operation) 4: appearance (with anti abrasion process, improve wear resistance, safety and environmental protection, this small volume, light weight, convenient but 5: the ability to resist environmental light interference (reducing the influence of ambient light on the use of automatic adjustment of brightness can be clearly observed and measured results) 6: intelligent judgment system (intelligent judgment, analysis system if 20 seconds without measuring reaction, oximeter power off automatically)
UN230 Fingertip Pulse Oximeter â?¢ Major Features Anti-movement, good low-perfusion performance. Pop-up menu to setup alarm limits Small in volumeã??light in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Pulse waveform display The display mode can be changed A pulse rate sound indication With measured data overruns limits and low-voltage alarm function Battery voltage indication Automatically power off function Display format and alarm limits can be saved after power off.
Anti-movement, good low-perfusion performance. Pop-up menu to setup alarm limits Small in volumeã??light in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Pulse waveform display The display mode can be changed A pulse rate sound indication With measured data overruns limits and low-voltage alarm function Battery voltage indication Automatically power off function Display format and alarm limits can be saved after power off.
Features: Measure SpO2 and PR accurately Color OLED display SpO2 and PR, Pulse waveform and bargraph display High brightness full color OLED can be used even in dark night Four viewing angles and six display modes Four levels adjustable brightness Low battery voltage indicator Automatic power off when signal is not available for 4 seconds 2 AAA batteries support 30 hours continuously Mini size, light weight, convenient to carry Widely used in hospital, home healthcare, oxygen bar, community medical centre, alpine area, sports healthcare etc. Specification: Display :64K color OLED SpO2 Measurement range: 35í½99% Resolution: í+1% Accuracy: í+2% (70%í½99%), unspecified (
Features: Small & lightweight design ( total 28g without batteries ) Digital LEDs display Display SpO2,PR,Pulse bar Low power consumption Automatically power off Battery-low indicator 2 AAA alkaline or rechargeable batteries Accommodates widest range of finger sizes from pediatric to adult Standard Accessory 2 AAA Alkaline batteries Operating manual Hang string
Dwd-2704:fingertip pulse oximeter Features The device can accurately measure spo2 and pulse rate in a 2% tolerance. The device will power off automatically without the signal for 4 seconds. Two aaa size batteries are required for operating, and the continuous working time is 12 hours. When low-voltage warning is shown on screen and the malfunction may be caused. The device is so light that its weight with batteries is about 50g. It shows waveform Specification A. Display mode: 64k color oled display Spo2 display: 35%~99%, Pulse rate display: 30bpm-240bpm, Pulse wave's intensity display: 15-segment bar-graph display Low battery voltage indication: segment oled signal B. Power supply requirement: 1.5v (aaa size) alkaline batteries ¡Á 2 C. Operating current: ‹ 60ma D. Resolution: spo2 +-1% Pulse rate +-1bpm E. Accuracy: spo2 +-2% (during 70%¡-99% No definition (
Dwd-2701: fingertip pulse oximeter Technical specification Display format: led Spo2: 3599% in 2-digit 7-segment digital Pulse rate: 30240 bpm in 3-digit 7-digital Pulse wave: 6-segment bargraph Bettery voltage low indication: led signals Power requirements: 2aaa size 1.5v alkline battery Power consumption: less than 40ma Resolution: +-1% for spo2 and +-1 bpm for pulse rate Measurement accuracy: +-2% in stage of 70%-99% spo2 and meaningless when stage being smaller than 70%, +-2% bpm for pulse rate Measurement performance in weak filling condition: oxyhemoglobin and pulse rate can be shown correctly when pulse-filling ratio is 0.5% Interference resistance capacity against ambient light: deviation is smaller than +-1% between value of oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room It is equipped with a function switch, through which the oximeter can be automatically powered off when no finger is in the oximeter more than 8 seconds
FINGERTIP PULSE OXIMETER Parameters: Two parameters:SPO2, Pulse Rate. Waveforms: SpO2 Waveform. Features: 1 COLOR OLED display, four direction adjustable. 2 SpO2 and pulse monitoring, and Waveform display. 3 With menu operation. 4 With beep and alarm. 5 Low-power consumption, continuously work for 50 hours. 6 Small in size, light in weight, and convenient to carry. 7 Low voltage alarm display, Auto power-off. 8 Runs on standard AAA batteries. Detailed descriptions of product functions: SPO2: 1 Measurement range: 70%-99% 2 Accuracy: �±2% on the stage of 70%-99%, unspecified(