Fingertip Oximeter

Technical Parameters Display Mode : double Color OLED display SPO2 measuring range: 35-100% Pulse Ratio:30-240 BPM Pulse Waveform display: bargraph display Battery indication: OLED display Power Requirements: 1.5V(A A A size )Alkali Batteriesí-2 Adaptable range:2.6V-3.6V Working current:í_20mA Resolution: SPO2 : 1% Pulse Rate: 1bpm Accuracy: SPO2 :70% to 100% í+2digits,below 70% unspecified Pulse rate:í+2bpm or í+ 2%(select larger) Measurement at Low Perfusion: The values of SPO2 and pulse rate can be displayed properly when pulse saturation is at 0.4%. Accuracy of SPO2:í+4% Accuracy of Pulse Ratio.í+2BPM or í+2% (Select Larger) Resistance to surrounding light: Deviation is smaller than í+1% between value of Oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room. Automatic shutdown function: The device will power off automatically within 5 seconds when there is no finger in the device. When working, the display direction can be changed by pressing the button shortly. There are six modes of direction. In working term, long press can change the lighteness of the screen.

VERY ACCURATE READINGS - Our pulse oximeter has been clinically tested and consistently beat other pulse oximeter in terms of accuracy and reliability, it is found to be a fast and absolutely reliable gadget to use. It is ideal for the oxygen and pulse readings, and have a very small error margin. FAST AND EASY OXIMETER READINGS - Taking your oxygen and pulse readings with this digital oximeter is as simple as pressing a button. BRIGHT & COMPACT - Bright OLED display allows clear reading in dark, inside home or in bright sunlight. Oxygen saturation monitor shows real time Pulse Rate, Pulse Rate Bar and SpO2 level. Light Weight, Easy to carry & Accommodates wide range of finger sizes. LIGHT, COMPACT & LONG BATTERY LIFE- Light and compact, accommodates wide range of finger sizes, long battery life, automatic power off after 10 seconds.

Features: Measure SpO2 and PR accurately Color OLED display SpO2 and PR, Pulse waveform and bargraph display High brightness full color OLED can be used even in dark night Four viewing angles and six display modes Four levels adjustable brightness Low battery voltage indicator Automatic power off when signal is not available for 4 seconds 2 AAA batteries support 30 hours continuously Mini size, light weight, convenient to carry Widely used in hospital, home healthcare, oxygen bar, community medical centre, alpine area, sports healthcare etc. Specification: Display :64K color OLED SpO2 Measurement range: 35í½99% Resolution: í+1% Accuracy: í+2% (70%í½99%), unspecified (

Features: Small & lightweight design ( total 28g without batteries ) Digital LEDs display Display SpO2,PR,Pulse bar Low power consumption Automatically power off Battery-low indicator 2 AAA alkaline or rechargeable batteries Accommodates widest range of finger sizes from pediatric to adult Standard Accessory 2 AAA Alkaline batteries Operating manual Hang string

Dwd-2704:fingertip pulse oximeter Features The device can accurately measure spo2 and pulse rate in a 2% tolerance. The device will power off automatically without the signal for 4 seconds. Two aaa size batteries are required for operating, and the continuous working time is 12 hours. When low-voltage warning is shown on screen and the malfunction may be caused. The device is so light that its weight with batteries is about 50g. It shows waveform Specification A. Display mode: 64k color oled display Spo2 display: 35%~99%, Pulse rate display: 30bpm-240bpm, Pulse wave's intensity display: 15-segment bar-graph display Low battery voltage indication: segment oled signal B. Power supply requirement: 1.5v (aaa size) alkaline batteries ¡Á 2 C. Operating current: ‹ 60ma D. Resolution: spo2 +-1% Pulse rate +-1bpm E. Accuracy: spo2 +-2% (during 70%¡-99% No definition (

Dwd-2701: fingertip pulse oximeter Technical specification Display format: led Spo2: 3599% in 2-digit 7-segment digital Pulse rate: 30240 bpm in 3-digit 7-digital Pulse wave: 6-segment bargraph Bettery voltage low indication: led signals Power requirements: 2aaa size 1.5v alkline battery Power consumption: less than 40ma Resolution: +-1% for spo2 and +-1 bpm for pulse rate Measurement accuracy: +-2% in stage of 70%-99% spo2 and meaningless when stage being smaller than 70%, +-2% bpm for pulse rate Measurement performance in weak filling condition: oxyhemoglobin and pulse rate can be shown correctly when pulse-filling ratio is 0.5% Interference resistance capacity against ambient light: deviation is smaller than +-1% between value of oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room It is equipped with a function switch, through which the oximeter can be automatically powered off when no finger is in the oximeter more than 8 seconds

Supplier: N95 ,KN95 ,Isolation gown, Goggle,Ethanol ,Fingertip Pluse Oximeter ,Thermometer ,SARS-COV2 Antibody Test ,Protective clothes
Services: Clearing ,transporting

Supplier: Homecare medical product like infrared thermometers, fingertip pulse oximeter, blood pressure monitors, TENS, body fat scale, fatal doppler

LCD display with backlight, can be used in any illumination conditions. DSP technology is employed to assure accuracy and reliability of FHR detection. High sensitivity probe with 1 MHz in pulse (Option: 2.0MHz in continuous wave). Ergonomic design, portable and convenient. Built_in speaker and Sound frequency output port. Automatically power off; Multi_displaying of FHR: number, battery status indicator, voice intensity indicator; Three working modes:Real_time FHR display, Mean FHR display and Manual counting display.(Option:2.0MHz)