3, 4, 5-trifluorophenol Min.99.5% 50kg/drum
photochemicals, 3-amino-4-chlorobenzoic acid dodecylester Min.99% We also can offer 3-amino-4-chlorobenzoic acid 25kg/drum
L-isoserine L-isoserine also called (s)-isoserine cas:632-13-3 25kg/drum
1-benzyl-5-ethoxyhydantoin Min.99% 25kg/drum
Colored Masterbatch Conforms to a very elaborative, scientific and technical process. Addition of 3-5% of our masterbatch suits your need for blown film applications upto 120 gauge film thickness. All color combinations available. Metallic color masterbatches also available at a little higher price tag 25 kg export quality bags
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
Industrial chemicals likes tetra sulpho optical brightener and di sulpho optical brighteners for pulp and paper, caustic soda flakes / sodium hydroxide, caustic soda lye, asa sizing agent, akd sizing agent, wet strength resin agent / dry strength resin (polyamido polyamine epichlorohydrin resin with a high% of solids 25 35%), sae anionic for sizing agent (butyl acrylate styrene polymer 24 26%), sae cationic for sizing agent (copolymer n [3 (dimethylamino) propyl] methacrylamide / styrene ]]) for paper industry, fluorescent brightening agents, optical brighteners for paper, fluorescent whitening agents, optical brightener, carbomer, carbopol, polyaluminium chloride, carbon brushes and brush holders, pp granules, plastic granules and many more..
Products Information: Products Name: OPTICALBRIGHTENER OB-1; Color Index No: C.I.393 Synonyms: FBA 393; OBA 393,Fluorescent Brightener OB-1; Optical Brightener Agent OB-1 Molecular Formula:C28H18N2O2 Molecular Weight:414 CAS No:1533-45-5 EINECS No: 216-245-3 Appearance: Light yellowish green powder Melting point:358 Assay:98.5% Fineness: 200 meshes Molecular Structure: Features Optical Brightener OB-1has excellent high temperature resistance. It has wide range ofapplication, and is used for the whitening of nylon fiber, polyesters, andvarious plastics. It has outstanding brightening ability and gooddispersibility. It also has good adaption and weather resistance Applications OpticalBrightener OB-1 can be used on polyester fiber, nylon fiber, polypropylene,hard PVC, ABS, EVA, PS, polycarbonate etc. For high temperature resistantplastics, only ob-1 can be used, and the addition amount of optical brightenerob-1 is small and the whitening degree is high. Reference dosage: Every 1000kg materials to add OB-1 brightener: 1, EVA, polypropylene, nylon, polycarbonate in the amount of 75-200 g. 2. The adding amount of polyester fiber is 75g- 300g Package & Storage: 10kg or 25kg/ fiber drums. It can bepacked in other forms according to user's requirements. Shelf life: not more than 24 months inthe room temperature.
Product information Product name: OPTICALBRIGHTENER ER Liquid(PS-1. ER330) Color Index No: C.I.199 Synonyms: FBA 199; OBA 199,Fluorescent Brightener PS-1(ER330); Optical Brightener Agent PS-1(ER330) Molecular Structure: Molecular Formula: C24H16N2 Molecular Weight: 332.3972 CAS No: 13001-39-3 C.I. No.: C.I.199 Appearance: yellowish pulpy liquid E-value: 330 Features: Thisproduct is mainly used for whitening and brightening of blending fabrics suchas polyester and polyester cotton, polyester silk, polyester yarn, polyesterramie, polyester wool as well as whitening of chemical fiber and plastic. Thisproduct applies to pad dyeing and HTHP dip dyeing, especially low temperatureadsorption and high temperature setting process. Applications 1. Pad-dyeing hot melt method: Use quantity: 1.5-3g/L Process flow: two dip dyeing and two paddyeing (mangle expression 70) pre-drying (100) curing and setting (180 190, 40-30s). 2. HTHP dip dyeing method: Use quantity: 0.2 0.5% (o.w.f) Dyeing temperature: 120 130 Dyeing time: 30 - 60 minutes PH value: 4.5 - 5.5 (adjusted withacetic acid) Low temperature adsorption and hightemperature color development dyeing method: Use quantity: 0.5 1.0% (o.w.f) Dyeing temperature: 50 60 Dyeing time: 30 minutes PH value: 4.5 - 5.5 (adjusted withacetic acid) Process flow: add BC-100 whitening agentand additive (anhydrous sodium sulphate 1-2% relative weight of dyed cloth,acetone is adjusted in PH) and fabric to dye bath at room temperature temperature rises to 50, deying for 30min washing dehydration and pre-drying (100) setting and baking (180-190, 40-30s). Package & Storage: 25kg/50kg plastic drums. It can be packedin other forms according to user's requirements. Shelf life: not more than 12 months inthe room temperature. Cautions: 1.If suspension liquid is foundprecipitated and separated, just shake it before use, which does not affect theuse effect. 2.Please note that use this product within its yellow spot, i.e. paddyeing 5g/l,dip dyeing 0.8%(o.w.f). If use this product beyond its yellow spot, it will be easy to becomeyellow.
Paper Optical Brightenr Agent SPP Hexa-Sulphonic
Brewster window use the characteristics of total reflection property of the material. When the incident Angle (called brewster Angle of the material) is specified, the Polarization component of S in the incident light is partially reflected, while the P component is close to the full transmission.Sunday offers a variety of Brewster Windows based on UV-fused quartz for UV applications The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows.Brewster window use the characteristics of total reflection property of the material. When the incident Angle (called brewster Angle of the material) is specified, the Polarization component of S in the incident light is partially reflected, while the P component is close to the full transmission.Sunday offers a variety of Brewster Windows based on uV-fused quartz for UV applications Specifications Diameter 10mm to 127mm Diameter Tol. +/-0.02mm Material JGS1 Surface Quality 10-5 standard Flatness 1/10 lambda Parallisam
Zerodul Window with hole, we can achieve flatness
Sunday Optics offer 600mm size window with full CA test by 24 inches Zygo Interferometer The Standard Window Glass is N-BK7 or Fused Silica, but when manufacture,Fused Silica is more easy to keep its flatness stability. UV Fused Silica is better for UV wavelength, high power laser, the UV tranmission can be 185nm. BK7 Glass is aways used for visible light and near infrared, it is more economy and used for low laser as a protect window.Sunday Optics advantange is: within 600mm windows, we can offer full CA test reports, 1/10 lambda at 600mm is achieved. Specifications: Material BK7 K9 Fused Silica, Corning Fused Silica Size 1mm to 800mm Tolerance +/-0.01mm Parallisam
Sapphire has superior optical transmission qualities for ball lens and half ball lens. Ball lens is used to improve the signal coupling between optical fiber, transmitter and detector, improve the signal quality, and can also be used in endoscopy, bar code scanning, aspherical lens preprocessed materials, sensors, etc. The ball lens has a short focal length, which minimizes the distance needed to travel from the ball lens to the fiber. Ball lens commonly used in the optical fiber coupling, laser collimating device, Optical Measurement System, it has a shorter focal length and the characteristics of small size. Sunday produce ball lens, half ball lens, Super hemisphere ball lens, hollow ball lens.Sunday Optics can manufacture ball lens Minumum diameter 0.3mm.Sapphire has superior optical transmission qualities for ball lens and half ball lens. Sapphire Ball Lens Specifications: Material:Sapphire Size:0.3-50mm Surface Quality:80-50 Tolerance:+/-0.002mm Coating: AR Coating Ovality:+/-0.002mm Stock Size Part No. Structure Dia.(mm) Material SBS1 Ball lens 1mm Sapphire SBS2 Ball lens 2mm Sapphire SBS3 Ball lens 3mm Sapphire SBS4 Ball lens 4mm Sapphire SBS5 Ball lens 5mm Sapphire SBS8 Ball lens 8mm Sapphire SBS10 Ball lens 10mm Sapphire SBS12 Ball lens 12mm Sapphire SBS20 Ball lens 20mm Sapphire SBS50 Ball lens 50mm Sapphire SHBS1 Half ball lens 1mm Sapphire SHBS1 Half ball lens 5mm Sapphire SHBS1 Half ball lens 6mm Sapphire SHBS1 Half ball lens 10mm Sapphire SHBS1 Half ball lens 13mm Sapphire SHBS1 Half ball lens 24mm Sapphire SHBS1 Half ball lens 36mm Sapphire SHBS1 Half ball lens 40mm Sapphire
Beamsplitter is an optical element that divides a beam of light into two beams according to a certain ratio of reflection and transmission.In the usual laser optical system, lighting optical system, spectrometer optical system, beam splitter is a common optical element degree of transmission and reflection percentage, transmission and reflected light polarization state to carry out segmentation.We can offer the K9 broadband splitter plate elliptical, ultraviolet spectroscopic uv spectral wedge, calcium fluoride (CaF2) broadband infrared spectral wedge, zinc selenide (ZnSe) infrared broadband polarization spectral wedge, standard Cube beam spliiter, PBS, NPBS and other standard splitting optics.The function of depolarization splitting prism is to divide the incident light intensity according to a certain proportion of reflection and transmission, so it is an ideal splitter for controlling the application of laser beam.The function of a polarization spectroscope (PBS) is to divide incident light according to a certain percentage of reflected and transmitted light according to the corresponding polarization state of light. Conventional Beam splitter cube is consist of two right angle prisms. one of the cant face will be coated metal coating or medium which has good reflective. Other faces will be coated AR coating. Conventional Beam Splitter Cube Material H-K9L N-BK7 JGS1 Demenision 10mm 12.7mm 20mm 25.4mm 50.8mm or customized Demenision tol. +0.00/-0.05 Surface Quality 20-10 10-5 CA 90% Surface Flatness 1/10 lambda633nm Beam Deviation
To satisfy the requests and needs of our regarded customers, we exchange and supply excellent scope of Optical Brightener Plastics for Plastic Industry. All the offered specialists are broadly used to accumulate out intrinsic yellowness paints, inks, plastics, photographic arrangements and filaments. Separated from this, we store all the offered colors and specialists securely, before conveyance. Features: Skin-friendly. Precise pH value. Safe to use. TECHNICAL DATA SHEET CHEMICAL NAME: 2.2-(4.4-diphenolvinyly) dibenzoxazol CAS NO.:1533-45-5 COMMODITY - Optical Brightener OB-1 SPECIFICATION ITEMS - STANDARD APPEARANCE - Bright Yellow Crystalline Powder PURITY - Min99.5% MELTING POINT - 355~360? LOSS ON DRYING - Max0.5% Charge: 05 Analysis: Guoling
Optical brightening agents (OBAs), also known as fluorescent brightening agents (FBAs), or fluorescent whitening agents (FWAs) are chemical compounds that give a whitening effect to the fabric. They do this by absorbing light in the ultraviolet and violet region and re-emit the light in the blue region. Fluorescent activity is a short-term or rapid emission response, unlike phosphorescence, which is a delayed emission. This blue light reduces the yellow color of the substrate and gives a bright look. At Meghmani, you will find the ideal and quality Optical Whitening Agents. Being one of the leading optical brightening agent manufacturers and suppliers, we ensure delivering only the best products. Product Specification Product Code................ Cbs X End Use....................... Detergent Whitener, Paper Brightener Packaging Type......... Drum Classification............... Direct Brighteners Brand............................ ReSole Usage/Application....... Detergent & Paper Form............................. Powder Color............................ Bright colours Place of origin............ India (Megmani Dyes) Appearance Bright Lemonish greenish Powder Packaging Size 1-25 kg Material Optical Brightener Country of Origin Made in India Minimum Order Quantity 1 Kg
Product Class: Optical Brightener Agent For Plastic Product Name : Optical Brightener Agent KSN Chemical Name: 4.4-bis(5-methyl-2-benzoxoazol)-ethylene CAS No. 5242-49-9 C.I. No. 368 Structural Formula Molecular Formula: C29used for high temperature process. H20N2O2 Properties: 1. being highly whiteness with small usage 2. multipurpose used for whitening of polyester fiber and plastic 3. having a good compatibility and good fastness to light and sublimation. Can be Treating Process: Overlay plastic:0.5-2g/100kg Polyester fiber:10-20g Package: 20kg cardboard drum Technical Index: Appearance: greenish yellow powderï Melting process: 275~280 Ash content: Volatile content Fineness(300 mesh):100% Uses: mainly be used in whitening of polyester, polyamide, polyacrylonitrile fiber, the plastic film and all plastic pressing process. Can suitable for synthesizing high polymer including polymeric process. Package: 10kg or 25kg per fiber drum
Product Class: Optical Brightening Agent For Plastic Product Name: Optical Brightening Agent OB-1 Chemical Name: 2.2-(4.4-diphenol vinyl) dibenzoxazol CAS No.: 1533-45-5 C.I. No.: 393 Structural Formula: Molecular Formula: C28H18N2O2 Molecular Weight: 414 Technical Index: Appearance: yellowish green powder Melting Point:358~360 Purity:99% Uses : Mainly be used in whitening of polyester and plastic, as well in whitening of Nylon during polymerization. Package: 10kg or 25kg per fiber drum