Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
n product. Texture Feature: Light creamy to white color fine free flowing powder, free from rancidity and foreign matter. Specification : S.No Parameters Specifications 01 Appearance Slightly red color, fine powder 02 Solublity In Cold Water Min. 20% 03 pH Value OF 20% Solution 5.0 To 7.0 04 Viscosity Of 20% Solution In Brookfield Lvdvii+pro Viscometer ( Spindle No : 2 , Rpm 100 , Temp 800c) 50 to 150 cPs 05 Moisture Content, (w/w) Max. 13% 06 Bulk Density, Gm/ml 0.55 To 0.7 07 Ash Content Max. 10 % Application : Coat a piece of washed chicken in this dry mix powder. Then dip the coated chicken piece in the batter* until evenly wet. *Batter preparation: Dissolve 50 g instant crispy fry mix in 85 ml of water. Again roll the dipped chicken piece in a dry mix powder. Fry these coated pieces in a hot oil until it turns golden brown color. Note:100 g of instant crispy fry mix is enough for making 250 g of crispy runchy chicken. Storage : Exhibits excellent stability when stored in closed container under cool and dry ventilated place . Avoid direct sun light. Packing : Available in 25Kgs net weight paper bags with moisture proof line inside.
Water based adhesives, hot melt adhesives, aqueous coatings, uv varnishes, paper & boards and printing press chemicals, wet lamination, dry lamination, side/flap pasting, window patching, hot melt book binding adhesives, wood glue, mattress adhesives, construction adhesives, cold binding adhesive, window patching adhesive, cold glue for honeycomb sheet, side/flap pasting adhesive, dry lamination adhesive, solvent less pu adhesive general to medium performance grade, solvent less pu adhesive for high performance grade, solvent base general grade, solvent base gmedium grade , wet lamination adhesive(top grade), aqueous or water base coating for offset press, water base pressure sensitive adhesive, water base for label stock, hvac insulation adhesive, jelly or animal glue, book bidning adhesives,pet botlle labelling adhesive, carton sealing & closing adhesive, hot melt adhesive for paper bag handle, solvent base medium grade, solvent less pu adhesive.
Application - WE HAVE VARIOUS GRADES FOR PAPER/PAPER/PAPER BOARD PASTING AS PER END NEED OF CUSTOMER, WE SUPPLY TO THEM
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
PREGEL STARCH is a fine white powder. It provides product with viscosity without the need for cooking on high temperatures, which means that the food manufacturer does not need to precook the starch. Pre-gelatinized starches retain most of the functional properties and viscosity of the original base material. Features: High Paste formation in cold water Water holding capacity is high at low temperature High Pasting property Viscosity is stable Excellent thickening characteristics Excellent solution stability with high flow and spread properties Application: Baking Industry Beverages, meats and dairy products Confectioneries for gelling, thickening, texture stabilizing Foam strengthening and crystal growth control in food products For adhesion, film foaming and glazing
Poly is a water-soluble synthetic polymer. It has the idealized formula [CH CH]. It is used in papermaking, textile warp sizing, as a thickener and emulsion stabilizer in PVAc adhesive formulations and a variety of coatings. It is colourless and odorless. It is commonly supplied as beads or as solutions in water.
Technical Data Sheet Of Accoset-50 ALUMINA MORTAR (Test Certificate) General Properties A. Max service temperature - 1500 oC B. Maximum grain size - 0 - 1.5 mm C. Water required for mixing - 22 - 30% D. Setting - Airsetting E. Sintering Temp - 1550 oC Chemical Properties A. Al2O3 - 50.00% B. SiO2 - 31.00% c. Fe2O3 - 5.00% D. LOI - 7.00% Physical Properties A. Dry Density - kg / m3 B. CCS - 17 kg / cm2 after drying at 110C / 24 hr C. MOR - 20 kg / cm2 at 110 oC/ 24 hr 18 kg/cm2 at 800 C/ 3 hr Thermal Properties - A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC Packaging - 25 - 50 kg bags Storage Life - 12 months Delivery State - Dry
TECHNICAL DATASHEET EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 7% solution - 5 to 7 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in a cooker 2. Gradually add EcoTexTM-SL55 and min for 2 min. 3. Close the pressure cooker lid. 4. Open the steam value and cook to @ 120�? �ºC or 35psi. 5. Retain in the cooker for 15 to 20 minutes. 6. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 25Kg net weight PP bags with moisture-proof liner inside
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 5% solution - 6 to 8 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually add EcoTexTM-SL20 and mix for 2 min. 3. Add other ingredients and mix for 2 min. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�? �ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
Sleep Better Drug Free Opens Your Nose to Relieve Nasal Congestion. It's simple Flexible, "spring-like" bands gently lift nasal passages open90% of people felt they could breathe better instantly. The only strip with 3M adhesive to hold strip comfortably in place Breathe Right nasal strips open your nose to help you breathe better so you can sleep better. Use every night if you suffer from: Nasal Congestion due to Allergies, Colds, or Deviated Septum Snoring Get the right size for best results Large - for an adult with a larger nose Sm/Med - fits 75% of adult noses Breathe Right Nasal Strips, Large Works instantly Use for Relief from Nasal
Product Details: Tape Width 60-80 mm Use Carton Sealing Adhesive: Acrylic Foam Tapes are made with single or double sided adhesive coating to meet the customerâ??s requirements Usage: Single sided foam tapes are uses as gaskets, seals or heat or cold insulation in HVAC, automobile, refrigerator, air-conditioner, electronics appliance and electrical panel industries. Special rubber and PU foams are used as ant vibration and sound dampeners in electrical and electronic industries
Tape Width >100 mm Tape Length >50 m Color Silver Use Bag Sealing Adhesive Acrylic Material Aluminium Foil Aluminum Foil Tapes are coated with acrylic or rubber adhesive and available with or without release paper. This foil tapes are available with 25 mic-100 mic thickness. Features: Shiny silver, U.V. resistance Flame, moisture and many chemical barrier Good for harsh Long term outdoor application It has hot & cold insulation property Usage: Widely used in tubes and lead jointing for air conditioner, refrigerator and water heaters. For wrapping on pipes, engines and wires as a heat & water resistance. Used as a static ground application.
Product Details: Minimum Order Quantity : 50000 Piece Material : Paper, PVC, PP, PE Size ; 20 mm - 12 inches Type : Self-adhesive Surface Finish : Paper & Filmic Shape : All Shapes If you are looking to switch customers to a product, or if you want to help build brand loyalty, coupon labels might be just the solution you need. We are offering eye catching Coupon Labels that will attract sales and increase profits
Side/ Flap pasting Adhesives This grade is suitable for side flap sealing of mono-cartons in high speed machines like Bobst, Eureka, Yoko type of machines for bonding of laminated, UV Varnished and non -varnished surfaces etc. Also can be used for paper bag side & bottom pasting. Advantages : 1. The product is smooth flowing with good machine running characteristics. 2. Suitable for nozzle and cylinder application in high speed sealing machine. 3. Fast setting characteristics, gives undisturbed setting. 4. Retains paper tear of bond at -5°C & 70°C.
Hotmelt Adhesive for Pet Bottle Labelling Application : Suitable for Labelling for PP, BOPP, PE Labels to PET bottles for Beverages and Mineral water on machines Krones, Saddle, KHS. It has been designed for vertical labelers at both pick-up and Lap Glue stations. Also can be used for other plastic / glass containers and variety of other labels. Advantages: 1. It is best suitable for high speed machines. 2. No fumes and fiber formation during opertaion. 3. No reduction in dry tack on storage both before and after usage. 4. Free flowing characteristics of melt. Good pumpability & spreading.
Hotmelt adhesive for Carton Sealing & Closing DescriptionSuitable for bonding on paper to paper / board especially for shipping carton sealing (Both varnished and unvarnished) in packaging industries. Advantages: 1. Quick bond formation result in higher production. 2. Strong bonding between paper to paper / corrugated board-especially for carton sealing. 3. Minimal fume//odor. 4. No string formation usage. 5. Suitable fo longer working without choking on filters in nozzle applications. 6. Designed for faster melting.