Nickel Dihydroxide(Cas:12054 48 7) Suppliers and Manufacturers

Titanium Dioxide, E171, CAS No.13463-67-7, is a naturally occurring oxide of titanium, available as white powder. the naturally occurring oxide of titanium. It appears as a white powder and is often used as food coloring in cheese products, processed fruit, fat spreads, candy, etc. When used as a pigment, it is called titanium white. As an experienced Titanium Dioxide manufacturer and supplier, we has been supplying and exporting Titanium Dioxide for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Titanium Dioxide Specification ITEM STANDARD CHARACTERISTICS WHITE POWDER IDENTIFICATION D.PALE YELLOWISH COLOR AT HEATINGE. ORANGE-RED COLOR WITH H2O2F. VIOLET-BLUE COLOR WITH ZINC LOSS ON DRYING 0.23% LOSS ON IGNITION 0.18% WATER SOLUBLE SUBSTANCE 0.36% ACID SOLUBLE SUBSTANCE 0.37% LEAD 10PPM MAX ARSENIC 3PPM MAX ANTIMONY

Creatine Monohydrate, CAS No.6020-87-7, an odorless, white crystalline powder, a white odorless crystal powder that is extracted from fish and beef. Creatine Monohydrate is used in the food and beverage industry as an additive to food, health, and fitness products. Creatine Monohydrate can increase muscle strength, speed, and endurance while improving physical fitness and level of training, also available as Tri Creatine Malate. As an experienced Creatine Monohydrate manufacturer and supplier, we has been supplying and exporting Creatine Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.

Betaine anhydrous, rimethylglycine, CAS No.107-43-7, HS code292390, one of the betaine series and also known as betaine base, is a kind of nutritional additive of efficiency, high-quality and economic advantage and is widely used for animal and poultry breeding and aquaculture as well. Used in applications as diverse as sports nutrition and cosmetics. As an experienced Betaine anhydrous manufacturer and supplier, we has been supplying and exporting Betaine anhydrous for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Betaine Anhydrous Specification Specifications Standard Betaine anhydrous content (dry basis,%) 99 98.0 98.5 6.0 Loss on drying % 1.0% 1.5% 2.0% anticaking calcium stearate % 1.5% 1.5% Ignite residue % 0.2% 1.2% 1.5% chloride % 0.1% 0.5% 1.0% Heavy metal (Pb) 10ppm 10ppm 10ppm Arsenicâ?¤ 1ppm 2ppm 2ppm

Betaine, other name, trimethylglycine, CAS No.107-43-7, available as white Crystals or crystalline powder. Betaine is widely used as nutritional supplements. Betaine is available in Betaine Anhydrous and Betaine Monohydrate form. As Betaine Manufacturers, Suppliers and Wholesalers in China, we supply food and feed grade Betaine. As an experienced Betaine manufacturer and supplier, we has been supplying and exporting Betaine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Betaine Specification Items USP30 Feed Grade Feed Grade Content ,% 98.0-100.5 98.0 95.0 Loss on drying ,% 0.5 2.0 2.0 Heavy metalsPb,% 0.001 0.001 0.001 As,% 0.0002 0.0002 Residue on ignition,% 0.1 pH1+4 aqueous solution 0.8-1.2 Anti-caking agent 0 0 3.0

Taurine powder, CAS No.107-35-7, a non-essential amino acid, manufactured through chemical synthesis. Ethylene Oxide and Sodium Sulfate as the raw material during manufacturing process. Taurine Function: maintain the brain function and accelerate the development of baby and children's brain, accelerate the growth of the nervous system, accelerate the digestion of fat and plays a role in gall bile metabolization, protect the body's cardiovascular system. As an experienced Taurine manufacturer and supplier, we has been supplying and exporting Taurine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Taurine JP 15 Specification Product name: Taurine Batch No.: 160610 Manufacturing date: Jun. 10, 2016 Expiry date: Jun. 10, 2018 Testing date: Jun. 10, 2016 Reporting date: Jun. 10, 2016 Specification: JP16/USP32 Batch size: 3000 KGS Package: 25kg /Carton Item Standard Result AppearanceIdentificationAssay (C2H7NSO3)(on dry basis) Clarity of solutionResidue on ignition Loss on drying Heavy Metals (Pb) AsChloride (as Cl) Sulphate (as SO4) Ammonium salt (as NH4) IronChromatographic purity Total bacteria count Yeast and moldsE. ColiSalmonella Colorless or White crystals or crystalline powderpositive99.0~101.0% Colorless and clear0.1% max0.20% max10ppm max2ppm max0.011 % max0.010% max0.02% max10ppm max0. 2% max100 cfu/g max10 cfu/g maxNegative in 10 gNegative in 25 g White crystalsConformed99.73%Colorless and clear0.03%0.10% Conformed Conformed0.010%0.010% Conformed Conformed Conformed Conformed Conformed ConformedConformed Conclusion: Conformed the JP16/USP32

L-Carnitine Fumarate, CAS No.90471-79-7, is stable form of L-Carnitine manufactured through chemical synthesis from L-Carnitine and Fumaric Acid. L-Carnitine Fumarate. It has a white, hygroscopic crystalline powder appearance and is water soluble. L-Carnitine Fumarate is a functional food additive that is used for protein supplementation. It can be used in health products, sports beverages and infant food. As an experienced L-Carnitine Fumarate manufacturer and supplier, we has been supplying and exporting L-Carnitine Fumarate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Carnitine Fumarate Specification Item Specification Appearance White Crystals or White Crystalline Powder Specific rotation -16.5~-18.5 Residue on ignition 0.5% Solubility Clarification PH 3.0~4.0 Loss on drying 0.5% L-Carnitine 58.5 ±2.0% Fumaric Acid 41.5 ±2.0% Assay 98.0% Heavy Metals 10ppm Lead(Pb) 3ppm Cadmium (Cd) 1ppm Mercury(Hg) 0.1ppm Arsenic ( As) 1ppm CN- Not detectable Chloride 0.4% TPC < 1000Cfu/g Yeast & Mold < 100Cfu/g E.Coli Negative Salmonella Negative

Acetylated starch, E1420 in the E number scheme of food additives, is a modified starch. These are not absorbed intact by the gut, but are significantly hydrolysed by intestinal enzymes and then fermented by intestinal microbiota. E number: E1420 (additional chemicals) CAS Number: 9045-28-7 EC Number: 618-556-3

PRE ORDER / PRODUCTION FOB Thailand ( Laem Chabang Port ) KC 500; Nitrile Examination Gloves MOQ: 5 Million x 12 months MAX: 20M x 12 months Price USD8.00 KimTech; Nitrile Examination Gloves MOQ: 5 Million x 12 months MAX: 20M x 12 months Price USD8.20 *Including USD0.10 commission for buyer side *Sea Freight USD0.35 - USD0.50 CIF Payment terms : 1. SBLC as Warranty, amounting Half Value of First Month Delivery and or 2. Irrevocable Revolving Non Transferable Divisible LC with withdrawal % from the LC as deposit from the total amount of 1 month. Standing Operative Procedure; 1. NCNDA via Docusign 2. Buyer issues LOI, ICPO, LOA (if Proxy) and Proof Of Fund (*via Ready Willing Able or RWA Letter from the Buyer's Bank) for Fund verification, KYC 3. Within 24 to 48 hours of receiving the above Documents after verification, Buyer will be provided with a Draft Sales Purchase Agreement and LC Draft 4. Once the Buyer has reviewed the SPA, the Buyer and Seller will sign SPA - IMFPA. 5. Allocation Letter @ Authorization Letter will be provided thru the Zoom Meeting 6. Seller provides PI 7. Within 3 working days after the contract assigned, Buyer activate Letter of Credit @ Irrevocable Revolving Non Transferable Divisible LC to Seller with the following terms As Note given accordingly 2.5% - 10% payment withdrawn from the IRTLC for the deposit against Confirmation Letter from Factory and Invoice from Seller from the total amount of 1 month 90% - 97.5% will be withdrawn upon completion of SGS and ready for shipment for the First Month and 100% subsequently (to be confirmed by issuing bank) or value including the full purchase price plus the 2.5% - 10% one month sales for Deposit 8. PRODUCTION START 9. Seller provide delivery schedule from Factory within 10 - 15 working days after receipt of LC. If not Seller pay penalty 2.5% of 1 Month of Sales 10. Buyer provide SGS Inspection details to Seller to get approval from Factory for the Inspection 11. SGS is completed at the factory warehouse and after receive full payment the goods release from the Warehouse. 12. Seller released original documents to Buyer : Certificate of Origin, Packing List, Pro Forma Invoice 13. The Seller is responsible for the goods until they are loaded on a shipping vessel of which point all liability, risks, insurance and costs shifted to the buyer 14. TRANSACTION COMPLETE NOTE; 1.1Mil Deposit 10% 2. 5Mil Deposit 5% - 7% 3. 10M Deposit 3% - 5% 4. 20M Deposit 2.5%

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

L-Alanine, CAS No.56-41-7, white crystal powder used as safe nutrition supplements. L-Alanine can be used in break, fruit tea, milk food, beverage as a nutritional supplement. As an experienced L-Alanine manufacturer and supplier, we has been supplying and exporting L-Alanine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Alanine powder Specification Item STANDARD Identification, (IR) Positive Assay (C3H7NO2) ,%(on dried basis) 99.0~101.0 Specific rotation +14.3~ +15. State of solution, % 98.0 Chloride(as Cl),% 0.020 Ammonium (as NH4),% 0.02 Sulphate (as SO4),% 0.020 Iron(as Fe), ppm 10 Heavy metals (as Pb), ppm 10 Arsenic(as As2O3), ppm 1 Other amino acids Meets the requirements Loss on drying, % 0.20 Residue on ignition(as sulphated ash), % 0.10 pH value (1.0g/20mL water) 5.7~6.7

Brightness 95% powder Refractive index 1.59 Oil absorption (ISO787/5) g/100g DOP absorption(ISO 787/5) g/100g PH Value (ISO 787/7) 9.0 Bulk density 1.4g/cm3 Hardness in Mohs 3 Moisture 0.2% Caco3 99.6% Ca O 56.06% Mg O 0.01% Fe2 O3 0.001% Al2 O3 0.001% Si O2 0.01% L.O.l 43.89

Product Name: Calcium Carbide Molecular Formula: CAC2 Cas No: 75-20-7 Class: 4.3 Un No: 1402 EINECS: 200-848-3 Size 80-120mm, 50-80mm, 25-50mm, 15-25mm, 7-15mm, 4-7mm, 1-4mm etc. (Could produce as buyerâ??s requirements)

Product Name: Calcium Carbide Molecular Formula: CAC2 Cas No: 75-20-7 Class: 4.3 Un No: 1402 EINECS: 200-848-3 Size 80-120mm, 50-80mm, 25-50mm, 15-25mm, 7-15mm, 4-7mm, 1-4mm etc. (Could produce as buyerâ??s requirements)

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Product Name: D-cycloserine Synonyms: D-4-Amino-3-isoxazolidinone Appearance: Off White powder Odor &Taste: Characteristic Test Method: HPLC Specification: 99% min CAS: 68-41-7 Molecular Formula: C3H6N2O2 Molecular Weight: 102.09 Supplier: ZHENYIBIO Uses:D-Cycloserine, It is an antibiotic effective against Mycobacterium tuberculosis. Since the discovery that cycloserine is able to penetrate into the central nervous system, numerous studies have been conducted to assess the efficacy of cycloserine for psychiatric disorders. Main Application of D-cycloserine Powder 1.D-Cycloserine Powder is an antibiotic effective against tuberculosis. 2.D-Cycloserine Powder is mainly used for amino acid infusion, due to special wettability. 3.D-Cycloserine Powder is also used in cold cream, cosmetics.