Motor Connector Hg F 310C Suppliers and Manufacturers

EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.

Mercury is a chemical element; it has symbol Hg and atomic number 80. It is also known as quicksilver and was formerly named hydrargyrum from the Greek words hydor and argyros. Symbol: Hg Atomic number: 80 Melting point: -37.89�°F (-38.83�°C) Atomic mass: 200.59 u Boiling point: 674.1 F (356.7 C) Electron configuration: [Xe] 4f 5d 6s Density: 13.546 g/cm3

Golf cart Minimum Grand Clearance 150-200mm Curb Weight 500kg Maximum Speed 30-50Km/h Grade Ability 10-15�° Driving Mileage 70-90km Standing Postion of Tail Caddie Unequipped Seats 1 - 2 Certification CE Brake System Front disc+Rear dsic Charge Time(h) 7-9h Fuel Type Electric Motor power KDS 48V AC motor Range 60-80mile(Normal Road) Climbing Ability 25% Capacity 2 Curb Weight 550kg F/R wheelbase 1680mm Ground clearance 170mm Turning Radius 3.2m Size 2520*1340*2050mm

Product Name: N-Cyclohexyl-2-pyrrolidone Synonyms: 1-cyclohexyl-2-pyrrolidinon;1-cyclohexyl-pyrrolidin-2-one;n-cyclohexyl;n-cyclohexylpyrrolidinone;CHP;Cyclohexyl-2-pyrrolidone;LABOTEST-BB LT00159787;1-CYCLOHEXYL-2-PYRROLIDINONE CAS: 6837-24-7 MF: C10H17NO MW: 167.25 EINECS: 229-919-7 Melting point 12 �°C Boiling point 154 �°C7 mm Hg(lit.) density 1.007 g/mL at 25 �°C(lit.) vapor pressure 0.05 mm Hg ( 25 �°C) refractive index n20/D 1.499(lit.) Fp >230 �°F storage temp. Sealed in dry,Room Temperature pka -0.49�±0.20(Predicted) form clear liquid color Colorless to Orange to Green Water Solubility Soluble

The alkaline phosphates offer detergency activity in combination with the properties of sequestration, dispersion and buffering ability. STPP is used in water softening, industrial cleaners, food uses, detergent, emulsifier of oil and grease, peptizing agent, deflocculating agent in oil well, sequester in cotton boiling. Sodium Tripolyphosphate Kosher/FCC (GUSTO M31) WC Code: 19-053-01 Sales Specification Appearance: White Odorless Powder -Very Hygroscopic, risk caking pH (1% Sol) (%): 9.2 - 10.2 Phosphate as P2O5: 54.0 - 56.0 Fluoride as F (ppm): 10.0 Max Arsenic as As (ppm): 1.0 Max. Lead as Pb (ppm): 1.0 Max. Cadmium as Cd (ppm): 1.0 Max. Mercury as Hg (ppm): 1.0 Max. Packing 55.12 LB bag, 35 bags per pallet

Product Name: Octylamine Synonyms: Amine 8 D;Armeen 8;Armeen 8d;OCTYLAMINE;N-OCTYLAMINE;1-Aminooctan;CAPRYLAMINE;1-AMINOOCTANE CAS: 111-86-4 MF: C8H19N MW: 129.24 EINECS: 203-916-0 Melting point â??5-â??1 �°C(lit.) Boiling point 175-177 �°C(lit.) density 0.782 g/mL at 25 �°C(lit.) vapor pressure 1 mm Hg ( 20 �°C) refractive index n20/D 1.429(lit.) Fp 145 �°F storage temp. Store below +30�°C. solubility 0.32g/l form Liquid pka 10.65(at 25�ºC) color Clear Odor strong fishy ammonia-like odor PH 11.8 (100g/l, H2O, 25�ºC)

Product Introduction: Polyethylene terephthalate (PET), with the chemical formula (C10H8O4) n, is synthesized by exchanging dimethyl terephthalate with ethylene glycol ester or esterification of terephthalic acid with ethylene glycol, followed by condensation reaction to obtain dihydroxyethyl terephthalate. Belonging to crystalline saturated polyester, it is a milky white or light yellow, highly crystalline polymer with a smooth and glossy surface. It is a common resin in daily life and can be divided into APET, RPET, and PETG. It has excellent physical and mechanical properties over a wide temperature range, with a usage temperature of up to 120. Its electrical insulation is excellent, and even at high temperatures and frequencies, its electrical performance is still good. However, it has poor corona resistance, creep resistance, fatigue resistance, friction resistance, and dimensional stability. Product advantages: 1. It has good mechanical properties, with an impact strength 3-5 times that of other films, and good bending resistance. 2. Oil resistant, fat resistant, acid and alkali resistant, and resistant to most solvents. 3. It can be used for a long time in the temperature range of 55-60, and can withstand high temperatures of 65 and low temperatures of -70 for short-term use. Moreover, its mechanical properties are minimally affected by high and low temperatures. 4. Gas and water vapor have low permeability and excellent resistance to gas, water, oil, and odor. 5. High transparency, can block ultraviolet rays, and has good gloss. 6. It is non-toxic, odorless, and has good hygiene and safety, and can be directly used for food packaging. Product application: The main applications in the field of electronic appliances include: electrical sockets, electronic connectors, rice cooker handles, TV yokes, terminal blocks, circuit breaker casings, switches, motor fan casings, instrument mechanical parts, cash counting machine parts, electric irons, and accessories for electromagnetic stoves and ovens; Flow control valves, carburetor covers, window controllers, foot transmissions, and distribution panel covers in the automotive industry; Machinery industry gears, blades, pulley, pump parts, wheelchair body and wheels, lampshade shell, illuminator shell, drain pipe connector, zipper, clock parts, spray parts. It can be spun into polyester fiber, also known as polyester. Can be made into thin films for use as substrates, insulation films, product packaging, etc. for recording, recording, and film production. As plastic, it can be blown into various bottles, such as cola bottles, mineral water bottles, etc. Can be used as electrical components, bearings, gears, etc.

Paraxylene (PX) is an important aromatic hydrocarbon with various industrial applications, primarily in the production of purified terephthalic acid (PTA), which is a key precursor for polyester fibers and polyethylene terephthalate (PET). Here are some of its notable properties and uses: Properties of Paraxylene: Melting Point: 12-13 C Boiling Point: 138 C Density: 0.861 g/mL at 20 C Vapor Density: 3.7 (compared to air) Vapor Pressure: 9 mm Hg at 20 C Refractive Index: n20/D 1.495 Flash Point: 77 F Storage Temperature: Recommended at +5C to +30C Solubility: Slightly soluble in water (0.2 g/L) Appearance: Colorless liquid pKa: >15. Applications: PTA Production: Approximately 65% of PTA produced is used to manufacture polyester fibers, which are widely used in clothing and textiles. PET Bottles: About 30% of PTA is converted into PET, commonly used for beverage bottles and packaging. Plastic Products: The remaining 5% is utilized in various plastic products, including films and food containers

Trisodium Phosphate Anhydrous Granular FCC is mainly used as a buffering agent, emulsifying agent, anti-caking agent, antioxidant and nutritional supplement in the food industry. It is used in food products like smoothie and beverages .It has many industrial applications as well, it's used in water processing, as a washing agent and in detergent, Textile and leather agent, Ceramic, Enamel, Colors, Photographic developers; removing boiler scale; water softer; wet finishing ph value adjustment; aluminum polishing, burnishing; sugar refining; complementary feeding stuff ; cleaning compound. Sales Specifications pH (1% sol): 11.5 -12.5 Bulk Density, gm/cc: 0.80 Min. Water Insoluble, %: 0.1 Max. Loss on Ignition (Dry at 110 for 5 hr then ignite at 800�°C for 30 min), %: 2.0 Max Phosphate as (P2O5), %: 42.0 - 43.5 Assay, %: 97.0 Min Particle Size Distribution: Retained on 20 mesh (850 �µm), %: 20.0 Max Passed thru 100 mesh (150 µm), %: 35.0 Max. Parameter Fluoride as F, ppm: 10.0 Max. Arsenic as As, ppm: 3.0 Max. Lead as Pb, ppm: 3.0 Max. Cadmium as Cd, ppm: 1.0 Max. Mercury as Hg, ppm: 1.0 Max. Packing 55.12 Lb Bag, 40 bags per pallet

CAS 110918 HS Code 2931901990 Packing and Storage Packing In 200kgs net steel or plastic drum Storage Keep tightly closed Keep away from heat sparks and open flame Morpholine is a colorless waterabsorbing oily liquid It is soluble in water and common solvents such as ethanol benzene ether and glycol Morpholine as a metal corrosion inhibitor is mainly used to prevent corrosion of metals such as iron copper zinc and lead Morpholine is used as a raw material for medicine rubber accelerator and fluorescent whitening agent Melting point 75 C lit Boiling point 12601300 C 129 C lit density 0996 gmL at 25 C lit vapor density 3 vs air vapor pressure 31 mm Hg 38 C refractive index n20D 1454lit Fp 96 F storage temp Store below 30C Application Used as an intermediate for organic synthesis especially for rubber chemicals for vulcanization and stabilization Corrosion inhibitors and so on

Melting point -40 �°C (lit.) Boiling point 197 �°C (lit.) density 0.925 g/mL at 25 �°C (lit.) vapor density 4.1 (vs air) vapor pressure 0.02 mm Hg ( 20 �°C) refractive index n20/D 1.427(lit.) Fp 201 �°F storage temp. Store below +30�°C. solubility H2O: 1 M at 20 �°C, clear, colorless form Slightly Viscous Liquid pka 15.10�±0.29(Predicted) color Clear PH 6-8 (25�ºC, 1M in H2O) Odor Ammonia-like. explosive limit 1-9.9%(V) Water Solubility soluble 2-Methyl-2,4-pentanediol (MPD) is a diol organic compound with a chiral carbon atom. It is a colorless liquid at room temperature and can be Diacetonee alcohol is hydrogenated. The appearance is colorless liquid with mild sweetness. It is miscible with water, soluble in ethanol, and soluble in most organic solvents.

Tetrasodium pyrophosphate Food Grade is used as a buffering agent, an emulsifier, a dispersing agent, and a thickening agent, and is often used as a food additive. Common foods containing tetrasodium pyrophosphate include chicken nuggets, marshmallows, pudding, crab meat, imitation crab, canned tuna, and soy-based meat alternatives and cat foods and cat treats where it is used as a palatability enhancer. Tetrasodium pyrophosphate is sometimes used in household detergents to prevent similar deposition on clothing; it is used in household and industrial cleaning compounds, as a water softener, metal cleaner and for oil well drilling. Tetrasodium Pyrophosphate (TSPP) Food Grade (Wintersun) WC Code: 20-007-01 Sales Specifications Appearance: White Powder Content: 96.5% min Arsenic (As): 3 ppm Fluoride (F): 50 ppm Heavy Metals (Pb): 10 ppm Lead (Pb): 4 ppm Loss on Ignition: 0.5 % Water Insoluble: 0.2 pH (10g/L): 9.9 - 10.7 Packing 50 LB paper bag, 44 bags per pallet Tetrasodium Pyrophosphate (TSPP) Food Grade (Aditya Birla) WC Code: 20-007-02 Sales Specifications WC Code: 20-007-02 pH(1% Solution): 10.2 - 10.6 Bulk density gm/cc: 0.70 min. Water Insoluble %: 0.1 max. Loss on ignite (at 550 oC, 30 minute) %: 0.5 max. Phosphate as (P2O5) %: 52.5 - 54.0 Assay %: 95.0 - 100.5 Fluoride as F ppm: 10.0 max. Arsenic as As ppm: 3.0 max. Lead as Pb ppm: 3.0 max. Cadmium as Cd ppm: 1.0 max. Mercury as Hg ppm: 1.0 max. Packing 55.12 LB paper bag, 40 bags per pallet

Monosodium Phosphate Anhydrous also known as Sodium Dihydrogen Phosphate and Monosodium Dihydrogen Orthophosphate, is a high buffering capacity reagent, also has the sequestrant, emulsifier and mordant properties. It is used to control pH and in industrials applications, it is used as a fireproofing agent, buffering agent, supplement for animal feed. It is employed to prepare different buffer solutions, detergents, ceramics, enamels, and boiler products. It is also used in brazing/soldering, to treat boiler water/wastewater, and to acidify urine. Monosodium Phosphate Food Grade is mainly used as used as a buffer and acidity regulator in food, as a Leavening acid in baking powder and a binder and curing agent for bread and sauce. It's used as a pH buffer, stabilizer, and emulsifier in processed cheese, condensed milk, instant pudding, and other food applications. Monosodium Phosphate Anhydrous MSP (Sodium Dihydrogen Phosphate) FCC WC Code: 13-028-02 Sales Specification pH(1% Solution): 4.4 4.6 Bulk Density gm/cc: 0.60 min. Moisture (at 110 Deg C for 4 hr) %: 1.5 max. Water Insoluble %: 0.1 max. Phosphate as ( P2O5) %: 58.0 59.5 Assay %: 98.0 min. Fluoride as F ppm: 10.0 max. Arsenic as As ppm: 2.0 max. Lead as Pb ppm: 2.0 max. Cadmium as Cd ppm: 1.0 max. Mercury as Hg ppm: 1.0 max Packing 55.12 lb bag, 35 bags per pallet. Monosodium Phosphate Anhydrous FCC Wintersun WC Code: 13-028-03 Sales Specification Assay,%: 98.0-103.0 Arsenic: 3ppm Max Fluoride, %: 0.005 Max Insoluble Substances, %: 0.2 Max Lead: 4ppm Max Loss of Drying, %: 2.0 Max Packing 50 lb bag, 40 bags per pallet.