Sq Type Microwave Motion Sensor Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux) 18 Months Mfg Warranty Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. HF system : 5.8GHz CW radar,ISM band, Connection Point: L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily
SPECIFICATIONS : SOLAR PANEL : 0.55 W. 17% EFFICIENCY Li-ion BATTERY : 3.7V 1200mAh LED POWER : 0.2 W NIGHT SENSOR :
Description Falcon is a radar sensor, which uses microwave doppler technology for activation of door. It can be mounted on all types of standard automatic doors. Falcon 2.0 is with unidirectionality function, to reduce the heat loss from building and save energy. Function and Advantages radar motion sensor for automatic door Unidirectional and bidirectional detection optional Intelligently opening & closing High sensitivity and accuracy For all kinds of automatic doors TABLE OF SPECIFICATIONS Technology: Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm�² Min. detection speed: 5 cm/s Supply voltage: 12V - 24V AC -/+10% 12V -24V DC +30%/-10% Mains frequency: 50 Hz - 60 Hz Max power consumption: < 2 W Output: solid state relay(free of potential change-over contact Current max.output: 2A(MAX) Degree of Protection: IP54 Mounting height: 1.8 m to 5 m Temperature range: -25'C TO +70'c Dimensions: 80 mmï¼?L) * 60 mm(H)* 50 mm (W) Angle of inclination: 0' to 90' (vertical direction); -30' to + 30' lateral direction) Cable length: 3 M
5.8GHz C-band microwave motion sensor, tri-level dimming control; Operating voltage: 120-277V AC, 50/60Hz; Rated load: 400W@120V AC(capactive), 800W@200-277V AC(capactive); Stand-by power:
operating voltage DC 9-16V consumption current â?¤18mA(DC12V) operating temp -10ºC~+50ºC installation mode ceiling mounted installation height about 2.5~6m detecting distance Ï?8m detecting angle 360 degrees alarm output N.O./ N.C. optional anti-dismantle switch N.C. dimension Ï?106*36mm
operating voltage DC 9-16V consumption current â?¤18mA(DC12V) operating temp -10ºC~+50ºC installation mode ceiling mounted installation height about 2.5~6m detecting distance Ï?8m detecting angle 360 degrees alarm output N.O./ N.C. optional anti-dismantle switch N.C. dimension Ï?106*36mm
This "Solar Sensor Wall Light" has an intelligent energy saving mode which charges the solar light under both strong sunlight and dim sunlight. This is best suited for lighting up dark or sensitive areas around the house. This solar light is made of high-quality PVC plastic which makes it durable against sunshine, rain, snow, ice, and wind. This solar light is waterproof and heatproof. These solar light can be placed in your garden, yard, aisle or driveway. This lantern emits a white bright light. It's lightweight and portability makes it perfect for your camping and trekking. The built-in solar panel charges the battery to provide 8-10 hours of light. The solar panel needs only 6-8 hours of charging for a full charge. The installation of this solar light is easy and requires no extra equipment. You just need to screw it to hold it against any surface or wall. This "Solar Sensor Wall Light" is equipped with Day/Light sensor, When there is Sunlight available the solar light will charge itself and when it becomes dark, the solar light turns itself On and provide a bright white light of 20 LED lights. Besides the solar sensor, this solar light has motion sensor inside it which runs on infrared. When you move away from the solar light it will automatically shut down and when you go near to the solar light, it will automatically turn on. SKU YN2092 Weight 150 Grams Height 12 cm Width 5 cm Length 9 cm Watt 5 Watts Material Plastic In Pack 1 Solar Sensor Wall Light
Established with a vision to take the worldâ??s energy-efficient drive forward, Sensinova has today emerged as Indiaâ??s leading player in the segment of designing, manufacturing, and deploying Motion/Occupancy Sensors, Home Automation Solutions & Smart Lighting Solutions.
Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. 5.8GHz C-band miniature transceiver. Patch antenna, antenna gain: 2 dBi. Beam aperture: 30 Features Low cost. 5.8GHz C-band miniature transceiver. Patch antenna, antenna gain: 2 dBi. Beam aperture: 30 2 balanced mixer. 5dBm EIRP output power. Receiver bandwidth: 1Hz ~ 2KHz. Operating current(CW mode): 13.5mA@5V. Low power consumption(Pulse mode): Average current: 1.5mA typ. Pulse width(min.):10~50 s(10kHz~2kHz) Duty cycle:10% DC RoHS compliant Tested to EN300 440 -
AC Input Microwave Motion Sensors Microwave Sensor AC Input AC Input Microwave Motion Sensor - Standard Version HNS203 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277V AC, 50/60Hz. Rated load: 400W@120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277V AC, 50/60Hz. Rated load: 400W@120VAC, (capacitive) 800W @ 200277VAC, (capacitive) Stand-by power: -
AC Input Microwave Motion Sensor - Highbay Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS203HB 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) 800W @ 200~277VAC, (capacitive) Stand-by power: ?1w. Dual-PD technology, real Da ylight mo nitoring function for built-in application. Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay . Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature:-20+70 RoHS compliant. IP rating: IP20. Setting Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. "50lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. "+" : means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. *0% means on/off control. 10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc -
Standard Motion Sensor Module DC Input Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS102 5.8GHz C-band microwave, tri-level dimming function. Input voltage: 12V DC (5V & 24V DC version available on request). Input current: 25mA. Features 5.8GHz C-band microwave, tri-level dimming function. Input voltage: 12V DC (5V & 24V DC version available on request). Input current: �?� 25mA. 0~10V DC dimming output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20�??~ +70�?? . RoHS compliant. Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s# sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. w50lux": The sensor works only in twilight. w10lux, 2luxw: The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. -
5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technology, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature: -20 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
AC Input Microwave Motion Sensor - Highbay Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS203HB 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) 800W @ 200~277VAC, (capacitive) Stand-by power: 1w. Dual-PD technology, real Daylight monitoring function for built-in application. Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay . Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature:-20??+70?? RoHS compliant. IP rating: IP20. Setting Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. "50lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. "+" : means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. *0% means on/off control. 10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc -
AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS201 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Features 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Rated load: 200W @ 120VAC, (capacitive) 400W @ 200-277VAC, (capacitive) Stand-by power: -
AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable Standard AC Input Motion Sensor Microwave Motion Sensors AC Input HNS204 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Features 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Rated load: 200W @ 120VAC, (capacitive) 400W @ 200~277VAC, (capacitive) Stand-by power: -
AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS201 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220,240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Features 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220,240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Rated load: 200W @ 120VAC, (capacitive) 400W @ 200-277VAC, (capacitive) Stand-by power: -
AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable Standard AC Input Motion Sensor Microwave Motion Sensors AC Input HNS204 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Features 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Rated load: 200W @ 120VAC, (capacitive) 400W @ 200~277VAC, (capacitive) Stand-by power: -
DC Input Motion Sensor Module Standard Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS101D 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC PWM output or 0~10V DC signal. Super compact, flexible to be integrated in t o any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature; -20? ~ + 70?. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. w50lux": The sensor works only in twilight. w10lux, 2luxw: The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. ?+? means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. Daylight monitoring function Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough). This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation. Note: Lux-Off sampling time?30s; Lux-On sampling time?10s. Lux-On function takes effect only when standby dimming period set at+?
With a Freestyle Libre Sensor you can continuously measure your blood sugar for 14 days. Attaching the sensor using the sensor applicator is well described in the instructions for use. When attaching the sensor, a small, 5mm long, flexible cannula is placed under the skin (usually painless). The sensor is worn on the back of the upper arm and continuously measures your glucose levels. It is waterproof and can be worn while bathing, showering or swimming. If you set up additional optional alarms, you will be warned in good time about hypoglycemia, for example, and can therefore feel even safer - day and night.