Falcon Microwave Radar Motion Sensor

Description PS1 is a radar sensor, which uses microwave doppler technology for activation of door. It can be mounted on all types of standard automatic doors. PS1 is with unidirectionality function, to reduce the heat loss from building and save energy. Function and Advantages Mounting height up to 5m Unidirectional and bidirectional detection optional Intelligently opening & closing Precise detection with high stability TABLE OF SPECIFICATIONS Technology: Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm² Min. detection speed: 5 cm/s Supply voltage: 12V - 24V AC -/+10% 12V -24V DC +30%/-10% Mains frequency: 50 Hz - 60 Hz Max power consumption: < 2 W

Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass

Sq Type Microwave Motion Sensor Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux) 18 Months Mfg Warranty Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. HF system : 5.8GHz CW radar,ISM band, Connection Point: L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily

Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. 5.8GHz C-band miniature transceiver. Patch antenna, antenna gain: 2 dBi. Beam aperture: 30 Features Low cost. 5.8GHz C-band miniature transceiver. Patch antenna, antenna gain: 2 dBi. Beam aperture: 30 2 balanced mixer. 5dBm EIRP output power. Receiver bandwidth: 1Hz ~ 2KHz. Operating current(CW mode): 13.5mA@5V. Low power consumption(Pulse mode): Average current: 1.5mA typ. Pulse width(min.):10~50 s(10kHz~2kHz) Duty cycle:10% DC RoHS compliant Tested to EN300 440 -

AC Input Microwave Motion Sensors Microwave Sensor AC Input AC Input Microwave Motion Sensor - Standard Version HNS203 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277V AC, 50/60Hz. Rated load: 400W@120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120277V AC, 50/60Hz. Rated load: 400W@120VAC, (capacitive) 800W @ 200277VAC, (capacitive) Stand-by power: -

AC Input Microwave Motion Sensor - Highbay Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS203HB 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) 800W @ 200~277VAC, (capacitive) Stand-by power: ?1w. Dual-PD technology, real Da ylight mo nitoring function for built-in application. Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay . Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature:-20+70 RoHS compliant. IP rating: IP20. Setting Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. "50lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. "+" : means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. *0% means on/off control. 10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc -

AC Input Microwave Motion Sensor - Highbay Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS203HB 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) 800W @ 200~277VAC, (capacitive) Stand-by power: 1w. Dual-PD technology, real Daylight monitoring function for built-in application. Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay . Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature:-20??+70?? RoHS compliant. IP rating: IP20. Setting Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. "50lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. "+" : means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. *0% means on/off control. 10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc -

AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS201 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Features 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Rated load: 200W @ 120VAC, (capacitive) 400W @ 200-277VAC, (capacitive) Stand-by power: -

AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable Standard AC Input Motion Sensor Microwave Motion Sensors AC Input HNS204 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Features 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Rated load: 200W @ 120VAC, (capacitive) 400W @ 200~277VAC, (capacitive) Stand-by power: -