Mijing C20 Motherboard Layering Test Fixture Suppliers and Manufacturers

Place of origin:united states Products status:stock, used Chipset manufacturer:intel Graphics card type:integrated Brand name:for dell Socket type:lga 755 Application:desktop Form factor:micro-atx Hard drive interface:sata Memory type:ddr3, sdram Fsb / ht:1333, 1066, 800mhz Model number:mig41r Condition:tested ok, work perfect Free shipping:yes Warranty:90days Socket type:socket 775 Number of memory slots:4 Mpn:7n90w. Safety paper box: 35x30x20cm, 1.5kgs

REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5

REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5

REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5

REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5

New motherboard hp nx/nc6120 All these items tested Good quality , and good price Posting by ems

GEOTEXTILE is a superior quality product and its quantity capabilities have been tested and have been certified by KAN and international standards. Hilon Geotextile Non-woven products are the core of various types of industry, from mining, to construction, agriculture, manufacturing and infrastructure. Perfect non-woven products always deliver excellent results. The advanced machines in all our factories in Indonesia are world class machines such as DILO (Germany), Asselin (France) and Fehrer (Austria) which none of our competitors can match. And once the output leaves the machine, a neat delivery network ensures that transport times are reduced and deadlines are met. Our products have been widely used and referenced for various road projects throughout Indonesia. And currently, in accordance with existing technological developments, the application of our products is increasing in accordance with developing technology. Non woven products can be found at various important industrial points in Indonesia. Starting from mining, construction, agriculture, manufacturing, to infrastructure. We are also proud to take part in handling Government projects and partner companies, to help build Indonesia\'s future. Along with the growth and diversification of the existing economy, we also develop. Apart from that, GEOTEXTILE is also being developed to strengthen bunker layers on golf courses and also wrap perforated pipes. Stabilization Where the main function of geotextile stabilization is to spread the surface load more evenly, so that the soil can support the load well. Filtration Geotextiles to filter and prevent the migration of particles from soil/mud along with water flow in the construction system. so that water from the ground surface can flow well and quickly into the channels that have been prepared. Drainage A system for channeling surface water or subsurface water into drainage channels, where the drainage system must be able to separate soil, sand or rock material so that it does not join the water. To prevent other materials from entering the exhaust pipe, geotextile is needed to support the material, but not prevent water from coming out. Protection Geotextile is applied to protect geomembrane construction or other products from being punctured by sharp objects such as rocks, tree trunks or branches and others. Hilon geotextile is used before the geomembrane material is installed so as to prevent damage to the geomembrane. Separation Geotextiles as a separator mix two types of layers with different granulations (Soil-Stone/Stone-Sand), thereby increasing the protection of a more stable area. Concrete Curing Curing is a concrete treatment effort after the concrete has been cast. Concrete treatment is mandatory because it aims to maintain the humidity and temperature needed for cement to carry out the hydration process perfectly.

Wheat starch is a plant-based dry powdered product, low-protein and low-fibre. It is composed mainly of polysaccharides such as amylose and amylopectin. Characteristics White powder, insoluble in water, neutral smell and taste. How is it obtained Native wheat starch is extracted from selected EU wheat, reduced to flour and then soaked in water. After that, the product is ground, filtered, centrifuged, dried and reduced to powder. Function Thickener Excipient Ingredient for glues in the paper industry Additive for recycled paper mixture Surface treatment for recycled paper Uses FOOD INDUSTRY Wheat starch is very useful as a natural thickener in the food industry, e.g. in the production of custard, pudding, sauces and dressing. It is also used for baking cakes and biscuits, as it improves the texture of the dough, enhancing the flavours and extending the shelf life of the finished products. PHARMACEUTICAL INDUSTRY In addition, it is used for covering tablets, as well as an excipient for natural products. And it is used as a culture medium for bacteria in the fermentation phase of specific tests. PAPER INDUSTRY AND CORRUGATED CARDBOARD In this sector, starch is used in the production of glues for the bonding of corrugated cardboard layers, and as the main ingredient for surface treatment to improve the printability and runnability of paper. Moreover, it is used as a natural additive for pulp in paper mills. Packaging Bulk in tanks Bag 25 Kg Big bag 1,000 Kg Minimum order FCA 1 x 1,250 Kg pallet 1 x 1,000 Kg big bag DAP 5 x 1,250 Kg pallets 5 x 1,000 Kg big bag

Teson tech is a professional pcb & pcba factory located in shenzhen china. We offer from 2-18 layers volume production and 2-24 layers prototype. We could offer you many kinds of special high technology of multi-layers circuits such as backplane pcb, metal base pcb, hi-tg heavy copper foil pcb, flat winding pcb, high frequency pcb, mixed dielectric base pcb, flex and flex-rigid pcb. Testing procedures for quality warranty: We perform multiple quality assuring procedures before shipping our products to customers. - 100% visual inspection - metal thickness test - copper thickness test - via hole test - 100% flying probe - 100% e test fixture - impedance control test - solder ability detection - digital metallogenic microscope - 100% aoi (automated optical inspection) Quotation requirement: -gerber file would be the best to get an accurate quotation. If no, following specifications are needed for pcb quotation. 1. Quantity 2. Base material 3. Layer count 4. Board thickness 5. Copper thickness 6. Surface treatment 7. Color of solder mask 8 other special requirements Pcb assembly files requests: 1. Gerber files of the bare pcb 2. Bom (bill of material) for assembly To shorten the lead time, please kindly advise us if there is any acceptable components substitution. 3. Testing guide & test fixtures if necessary 4. Programming files & programming tool if necessary 5. Schematic if necessary Teson tech has being done strongly to meet special needs of customer. We will do our best to give you our professional engineering supports, professional quality control in manufacturing and competitive prices. We hope that we could have a chance to have good and long term business with you! Vacuum package

We are Organic , ISO 22000 , Halal Certified Company and we are dealing in high quality products. Product Name: Radish Seed Oil Botanical Name: Raphanus Raphanistrum Urdu Name: Mooli ka beech Origin: Pakistan Payment Terms: 100% L/C at Sight or 100% T/T in Advance or 50% Advance and 50% CAD Packing: 200Ltrs or 50Ltrs in Iron Drums and small packing of 125ML and 250ML in Plastic Bottles Shipment: 10 to 15 days after order confirmation and transit time will be 20 to 25 days, if big order then partial shipment should be allowed Description: Radish seed oil is clear to golden in color and is odorless. It is used as a substitute for silicone in skin care and hair products. It could be used as a serum for skin, hair and nails. It absorbs in skin quickly and provides glow to the skin. If used as a hair serum it smoothens the hair follicles and makes it manageable. This oil is a triglyceride that has unusual combination of C20, C18 and C22 fatty acids. Being an emollient it reaches the lower layers of skin. If you have any interest in importing above-mentioned Oil then please do let us know Please checkout our website to see the Certificates, Images and Test Results Specification NaumanSAB Oil Company

Face Masks - KN95 Mask 4 layer with ear loop KN95 Mask 5 layer with ear loop Test Results - 95% PFE/120mmHg Fluid Resistance 95% PFE/160mmHg Fluid Resistance In Stock

Sunflower cooking oil- %free fatty acids (ffa): Max 0.1 - % ash (*): Max.0.05 - Saponification value:190.32 koh/g. Of oil - Iodine value:134.13 (wijs-hanus method) - Peroxide: 0.2 meq/KG. Of oil - % soap:0.0005 - % unsaponifiable matter: Max.0.12 - Impurities: None - % saturated fatty acids):8-12 - % unsaturated fatty acids):87-91 - Feeding energy:900kcal - Iron : < 0.02 mg/lt - Fatty acid composition : C14:0 :0.06 C16:0 :5.77 C18:0 :4.1 C18:1 :27.3 C18:2 :59.2 C20:0 :0.27 C18:3 :0.25 Physical properties - Appearance: No residue at 40 deg. C - Cold test: Min.48 hours at 0 deg. C - Color: Max.1.2 red, lovibond tintometer 5/20 inch - Refractive index:1.465-1.475 at 40 deg. C - Density:0.91-0.92 g/cm3 at 20 deg. C - Volatile matter: Max.0.07 % at 105 deg. C - Taste : Excellent - Odor : None - not sensed

We supply Grade A' Refined Corn oil. We package our Refined Corn oil in bulk or pet bottles. Appearance: Golden yellow, bright & clear oil liquid Odor: Bland, odorless Shelf Life: 12 months 1. Products Information Type: Corn Oil Processing Type Refined Use: Cooking Packaging Bulk, Plastic Bottle Place of Origin: Netherlands Certification ISO,ISSO, HACCP Volume 1.2.3.5.10 liters Physical properties 1. Appearance: No residue at 40 deg. C 2. Cold test: Min.48 hours at 0 deg. C 3. Colour: Max.1.2 red, lovibond tintometer 5/20 inch 4. Refractive index:1.465-1.475 at 40 deg. C 5. Density:0.91-0.92 g/cm3 at 20 deg. C 6. Volatile matter: Max.0.07 % at 105 deg. C 7. Taste : Excellent 8. Odor : None - not sensed Chemical specifications 1. %free fatty acids (ffa): Max 0.1 2. % ash (*): Max.0.05 3. Saponification value:190.32 koh/g. Of oil 4. Iodine value:134.13 (wijs-hanus method) 5. Peroxide:0.2 meq/KG. Of oil 6. % soap:0.0005 7. % unsaponifiable matter: Max.0.12 8. Impurities: None 9. % saturated fat(-ty acids):8-12 10. % unsaturated fat(-ty acids):87-91 11. Feeding energy:900kcal 12. Iron : < 0.02 mg/lt 13. Fatty acid composition : C14:0 :0.06 C16:0 :5.77 C18:0 :4.1 C18:1 :27.3 C18:2 :59.2 C20:0 :0.27 C18:3 :0.25 2. About Us Our company is producing high quality standards Edible oils. We are supliers for Corn, Sunflower, Vegetable, Soybean oils. Contact us and get quality products.