The three-rings and Medium-speed micro powder grinder is using the latest technological advances in grinding equipment, the three-rings and medium-speed micro powder grinder is widely used in grinding barite, limestone, kaolin, ceram, and slag, etc. Three-rings and medium-speed micro powder grinder is not different from other micro powder grinder. The three-rings and the rolling pressure ration of Medium-speed micro powder grinder is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree . When a certain degree of wear of roller and ring of the Three-rings and Medium-speed micro powder is effected, The three-rings and Medium-speed micro powder is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, The stable output and fineness of the three-rings and Medium-speed micro powder are ensured.
Models:HGM60;HGM80;HGM100
Model: HGM60
Diameter (mm): 600
Piece of roller : 15
Feed size (mm): í_10
Fineness of power (mm): 0.005 - 0.045
Capacity (kg/h): 350 - 2500
Total power (Kw): 37
Weight of main frame (with motor) (t): 5.2
Model: HGM80
Diameter (mm): 800
Piece of roller : 21
Feed size (mm): í_10
Fineness of power (mm): 0.005 - 0.045
Capacity (kg/h): 600 - 4000
Total power (Kw): 55
Weight of main frame (with motor) (t): 7
Model: HGM100
Diameter (mm): 1000
Piece of roller : 27
Feed size (mm): í_10
Fineness of power (mm): 0.005 - 0.045
Capacity (kg/h): 900 - 6000
Total power (Kw): 90
Weight of main frame (with motor) (t): 9.5
Notice: Any change of technical data shall not be advised additionally.
Heavy calcium carbonate is white powder, colorless, tasteless. Heavy calcium carbonate, referred to as farmers, is a natural carbonate minerals such as calcite, marble, lime stone mill broken into.It is a common powder mineral filler, have high chemical purity. Heavy calcium carbonate Usually used for packing, widely used in artificial floor tile, rubber, plastic, paper, paint, paint, printing ink, cable, building supplies, food, medicine, textile, feed, toothpaste and daily chemical industry, as filling agent have increased the volume of products, reduce the production cost.
Introducte of Heavy calcium carbonate micro powder grinder:
five models: HGM80, HGM90, HGM100, HGM100A, and HGM125
finished production fineness: 300meshes~3000meshes, 5-47 micron
the capacity (ton/hour) ranges from 0.4T/H to 12T/H
The application of Heavy calcium carbonate micro powder grinder:
HGM Series ultrafine grinding mill is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Mohs's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
Working principle of Heavy calcium carbonate micro powder grinder:
HGM series Heavy calcium carbonate micro powder grinder mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.
Coal ash is formed by coal fired boiler combustion powder, main ingredients Si02, Al2O3, Fe3O4, FeO, and a small amount of CaO and MgO, main purpose is the city garbage landfill; Coal ash dam processing; Road, railway, drainage engineering; Water conservancy, tunnel, dam, dam seepage control, brake, Accumulation of fluid seepage library; Water, infusion channel, solid waste stacked seepage control; The roof leak; Building basement, underground warehouse, underground garage moisture; Pile membrane cofferdam, wai sea epeirogenic, wharf engineering, etc. Coal ash has adsorption, purification, catalytic effects, and so in the lab can use coal ash instead of many drugs for various experiment, in daily life can be used to rescue, sewage treatment, production for fertilizer and improved acid soil, in the environmental protection can be used to deal with industrial waste water and so on. Make coal ash into powder, we have coal ash micro powder grinder machine; coal ash industrial powder grinder.
Clirik coal ash micro powder grinder machine; coal ash industrial powder grinder is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with mohss hardness under six, such as calcite, kaolins, limestones, calcite, barites, carbon black, mica, quartz etc. so Clirik coal ash micro powder grinder machine; coal ash industrial powder grinder become more and more requires by various industries. With the development of high-tech industry, fine and superfine powder is widely applied in various fields, Clirik coal ash micro powder grinder machine; coal ash industrial powder grinder is inevitably your first option.
Product description
White corundum is made of high quality aluminum oxide powder as raw material, refined and crystallized by electric melting. It has high purity, good self-sharpening, acid and alkali corrosion resistance, high temperature resistance and stable thermal performance. Its hardness is slightly higher than that of brown corundum.It is suitable for grinding fine grain abrasive such as high carbon steel, high speed steel and stainless steel.
chemical component Physical characteristics
size AL2O3
8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# â?¥99.5%
0-1mm 1-3mm 3-5mm 5-8mm 99.5%
100#-0 200#-0 320#-0 99%
FEPA:F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000
JIS:#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 99.2%
The purpose of the micro powder grinding mill is for super-fine grinding materials with hardness less than 6 in Mohs scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble,talcum, barite, gypsum, dolomite, bentonite mud,mica, pyrophyllite, sepiolite, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment and so on. The granularity of the end products is 325-2500 meshes (0.044-0.0055mm).
Working Principle Of Micro powder grinding mill:
The main bearing and each dial are driven by electromotor of main equipment through reducer, and numbers of rings and rolls which are rolling in the ring channels are driven by dial through plunger. After being crushed by hammer crusher, the big materials become small ones and they are sent to the storage bin by elevator. The electromagnetic vibrating feeder sends them to the middle of first dial evenly; the materials will be driven to the edge of dial by centrifugal force, and fall into the ring channels and are pressed, crushed and ground by the grinding rings and rolls. Then the materials fall into the second and third ring and crushed and ground. The high pressure centrifugal blower inhales air from the outside and blow the materials which are ground in the third ring to powder Separator. The rotating turbo in the powder Separator makes the coarse materials return to the mill and reground, while the fineness mixes with the air and be drawn to the cyclone and be discharged from the discharging valve which is in the bottom of it. The air which mixed with very little fineness are purified by impulse dust catcher and discharged by blower and muffler.
Features Of The Micro powder grinding mill:
1. High-efficiency and low consumption
With the same end-products fineness and motor power, its output is over 1 time of that of Jet Mill, Mix Mill, and Ball Mill.
2. Easy-damaged parts with longer working life
The grinding roll and ring are made of special materials. Generally, their work life is more than one year, but, which could come up to over 3 years, when it processes calcium carbonate and Calcite.
3. Security and Reliablity
Because there are no rolling bearing and bolts in the grinding chamber, we can not see the problems of bearings and sealings easily damaged and machine destroyed due to the bolts looseness.
4. Cleansing and Environment Protection
Adoption of Pulse dust collector and muffler reduces the industrial dust pollution and noise, which reaches the National Standard.
151993 Micro Powder Suppliers
Short on time? Let Micro Powder sellers contact you.
HGM Micro Powder Mill is the new type mining equipment for making micro powders, fine powdersï¼?which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on.The purpose of the micro powder grinding millis for super-fine grinding materials with hardness less than 9 in Moh's scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds.
MR 100 Specifications:
Input size: 10mm
Final product size: 325-1500mesh
Main motor: D97kw
Capacity: 0.5-3.2t/h
Total weight: 15ton
Power: 120kw
Dimension: 10*5*8m
This micro powder grinding mill is a domestic first products produced according the customerâ??s requirements on the production of 325-1500 meshes, after 3 year reseach by technical department and experienced practice of one years, it is a new equipment used for processing of the material of coal ash, talc, zirconite etc.
Main features:
1.Wide range of processing materials, so far,
it is the special equipment used for processing the mental ores material of 325- 1500 meshes in domestic
2.Low cost of spare parts is less, the cost is about 10% of the ring roll grinders
3.It is easy to maintain, service, replace, repair the vulnerable parts, the time of repair is just half day
4.The Power consumption is low while the produce is high, pollution-free, Efficient pulse dust remove is adopted, and there is no dust pollution during whole processing, and Quieter room is equipped to reduce the noise pollution
5.the quality of the powder is high with concentrated size, and powder being on average, and high content of micro powder
The application scope:
1.chemical engineering, construction materials fields such as Glass rubber pharmaceutical ceramics, Paint phosphate paper and so on, All kinds of Non-flammable and explosive non-metallic Non-flammable and explosive non-metallic materials with Mohs hardness of below 9, and The humidity under 6
2.breakthrough the grind of the hard material, powder material, light gravity like A zorite, talc and skin of trees
3.Can feed fully with powder such as coal fly ash.
The application area:
1. It can be applied in flour products such as bread, bean curd, noodles, biscuits, cakes and so on. The amount of influx is 3%-4% according to different tastes.
2. It can be applied in frozen products such as jelly, ice cream, frozen tangyuan, acidophilus milk and so on.. The amount of influx is 2.5%-3% according to different tastes.
3. It can be applied in snacks such as sweets, chocolate, seeds, mooncakes, salad and so on. The amount of influx is 3%-4% according to different tastes.
4. It can be applied in healthy products such as chewing gum, capsule, tablet, top sheet, beauty products and so on. The amount of influx is 3%-4% according to different tastes.
5. It can be applied in other fields such as macha drink, dishes with tea flavor, confect with tea flavor, wine with tea flavor and so on. The amount of influx is 3%-4% according to different tastes.
Net weight: 25kg/drum
Package: packed in fiber drum with aluminum foil bags.
Powder micro crystalline wax has the characteristics of high drop melting point, light color, low oil content and low penetration.
Usages: It can be used as processing additives for shoe polish, automobile wax, polishing wax, cosmetics, electronic products and so on. In addition, the use of the raw material in the wax paper formula can make the handwriting clear and the abrasion resistance can be significantly improved. It has a wide range of uses.
Properties:
Properties Unit SY-70 SY-80
Melting point C 65-70 75-80
Oil content % 1.5 1.5
Penetration 0.1mm/100g,5s at 25 C 20 20
Viscosity mm2/s at 100 C 5-8 8.5-10
Size mesh 16 16
Product Characteristics Product Detail
CAS No 137-51-9
Formula C6H7NO6S2
Molecular Weight 253.25
Synonyms 1- Amino Benzene 2, 4 - Disulphonic Acid
EINECS 205-299-3
Density 1.844 g/cm3
Purity (By amine value) 75 % Minimum (Wetcake)
Appearance Grayish to white Colored Wet Cake or Dry Powder
Solubility Freely Soluble in Water
Packing In 25 kgs net each HDPE bags
1.chemicalengineering, construction materials fields such as Glass rubber pharmaceutical ceramics, Paint phosphate paper and so on, All kinds of Non-flammable and explosive non-metallic Non-flammable and explosive non-metallic materials with Mohs hardness of below 9, and The humidity under 6
2.breakthrough the grind of the hard material, powder material, light gravity like A zorite, talc and skin of trees
3.Can feed fully with powder such as coal fly ash.
MR100 Specifications:
Input size: 10mm
Final product size: 325-1500mesh
Main motor: D97 kw
Capacity: 0.5-3.2 t/h
Total weight: 15ton
Power: 120 kw
Dimension: 10*5*8m
Main features:
1.Wide range of processing materials, so far, it is the special equipment used for processing the mental ores material of 325- 1500 meshes in domestic
2.Low cost of spare parts is less, the cost is about 10% of the ring roll grinders
3.It is easy to maintain, service, replace, repair the vulnerableparts, the time of repair is just half day
4.The Power consumption is low while the produce is high, pollution-free, Efficient pulse dust remove is adopted, and there is no dust pollution during whole processing, and Quieterroom is equipped to reduce the noise pollution
5.the quality of the powder is high with concentrated size, and powder being on average, and high content of micro powder
The molecular weight of ultra-fine powder of PTFE is only 1% of the general PTFE which not only maintained the excellent performance of original, but also has high crystallinity dispersion,and easy to uniformly mixed with other materials.It is widely used in the synthesis material modification,and can significantly improve the lubricity,wear resistance,non-adhesive and fire retardant of the substrate.It also can be used as rubber ,lubricant grease,printing links,
1. Exterior: white fine powder
2. Moisture content: less than 0.03
3. Average particle size: less than 5 micron
4. Tensile strength: 8 Mpa
5. Fracture elongation: 60%
6. Appaent density: 0.56g/ square centimeter
7. Thermal gravitational: less than 0.2%Wt
8. Corrosion resistance: No change
9. Melting point: 327 more or less centigrade
10. Decomposition temperature: 430 centigrade
11. Melt viscosity: 102-106 Pa.S
Turmeric powder is a yellow-orange spice made from the root of the Curcuma longa plant. It has a warm, earthy flavor and is commonly used in curries and other dishes. The active compound, curcumin, gives it its color and is known for its potential health benefits, including anti-inflammatory and antioxidant properties. It's also used in traditional medicine and skin care.
Our Turmeric Powder is a premium, pure and natural spice, sourced from the finest turmeric roots grown in the fertile soils of India. With its vibrant golden color and rich, earthy flavor, it is a must-have ingredient for both culinary and health-conscious consumers.
1) ygm7826 high pressure micropowder grinder
A) number of roller: 3
B) diameter of roller: 260mm
C) height of roller: 150mm
D) inside diameter of ring: 780mm
E) height of ring: 150mm
F) feeding size: <20mm
G) fineness of product: 0.025 ¿c 0.005mm
H) capacity: 50 ¿c 500kg/h
I) power of mill: 18.5kw
J) power of separator: 7.5kw
K) dimensions (l*w*h): 4, 500 *4, 200 * 5, 100mm
2) ygm8327 high pressure micropowder grinder
A) number of roller: 3
B) diameter of roller: 270mm
C) height of roller: 150mm
D) inside diameter of ring: 830mm
E) height of ring: 150mm
F) max. Feeding size: <20mm
G) fineness of product: 0.025 ¿c 0.005mm
H) capacity: 65 -680kg/h
I) power of mill: 22kw
J) power of separator: 7.5kw
K) dimensions (l* w * h): 5, 300 * 4, 100 * 5, 200mm
3) ygm9531 high pressure micropowder grinder
A) number of roller: 4
B) diameter of roller: 310mm
C) height of roller: 170mm
D) inside diameter of ring: 950mm
E) height of ring: 170mm
F) max. Feeding size: <25mm
G) fineness of product: 0.025* 0.005mm
H) capacity: 150~1000kg/h
I) power of mill: 37kw
J) power of separator: 7.5kw
Our Red Onion Powder is produced using the finest red onions, grown in Indias ideal climate, ensuring the highest quality and consistency. It is carefully processed to retain its natural aroma, flavor, and nutritional value. Free from artificial additives and preservatives, our onion powder is a healthier alternative to fresh onions, providing convenience and long shelf life without compromising on flavor. This product is perfect for use in soups, sauces, marinades, dressings, and seasoning blends. It also works well as a topping for snacks and can be used in spice mixes for a variety of cuisines. Whether youre a home cook, restaurant, or food manufacturer, our Red Onion Powder is a must-have ingredient for your kitchen.
