Ll(M) Series Slurry Pump Suppliers and Manufacturers

A slurry pump refers to a machine that increases the energy of a solid-liquid mixed medium through the action of centrifugal force (the rotation of the pump's impeller), and is a device that converts electrical energy into kinetic energy and potential energy of the medium. Mainly applicable to: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industries.

A slurry pump refers to a machine that increases the energy of a solid-liquid mixed medium through the action of centrifugal force (the rotation of the pump's impeller), and is a device that converts electrical energy into kinetic energy and potential energy of the medium. Mainly applicable to: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industries.

Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high  density  slurries  with  minmal  maintenance requirements. It maintains high eï¬?ciencies over the wear life of its components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant.   Pump range:  Discharge Size: 1" to 18" Capacity: 4 to 5400 m³/h Heads: 5 to 75 m  Typical application:  - Mill discharge - Coarse sand  - Tailings - Mineral concentration - Heavy media - Coal washing  - FGD - Process chemical  - Bottom / fly ash - Metal smelting Product features;  - Elastomer or high chrome alloy liners provide corrosion & abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life   - Large diameter, high eï¬?ciency impellers designed to oï¬?er maximum wear life and low operating cost, wide options of impeller for speciï¬?c applications  - Gland, expeller or mechanical seals are available to suite diï¬?erent working conditions  - The bearing can be grease or oil lubricated which oï¬?er ease of maintenance and reduced downtime  - The pump can be installed in multi-stage high pressure operation  - Large internal passage designed to reduce internal velocities, maximize wear life and lower operating cost  Contact us for more information:  Amanda Chen   +86 19921054564

Horizontal Slurry Pumps, Metal Lined Slurry Pumps, Heavy Duty Slurry Pumps Model: SH/100D, SH/150E, SH/200F Series: Metal Lined Slurry Pumps General Introduction: Our horizontal slurry pumps are designed for heavy-duty applications such as mining, minerals processing, mill discharge, power plants, tailings, and other industrial applications, for maximum abrasion, erosion, and corrosion resistance. The pumps are in a wide range of sizes, available with both high chrome and ruber wearing parts. Components like impeller and volute come in a range of hard metal types and elastomer to suit the specific application. Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal and mechanical seal. Our metal lined slurry pumps are designed for heavy duty industrial applications, to handle the most arduous slurries.  Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures. Applications: Heavy-duty slurry pumping applications, Mining and minerals processing, Mine refuse and tailings, Mill discharge, Cyclone feed, Sand and aggregates Driven Type: DC(z): The pump and the engine is directly connected by a coupling. Belt-driven Types: The pump and the engine is connected by pulleys and belts --- CV, CR(z), ZV(z).

JET-M SERIES SELF-PRIMING PUMP JET-M series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water from well,pool etc,the automatic distribution of water by surge tanks and pressure switch,gardening,andincreasing of water pressure. Working conditions Max Temperature of Fluid up to+40 Max pressure:8bar. Max Ambient Temperature up to 40 Standard data and equipment: Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft, with thermal protector insitde. Other model and material such as tThree phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.

Suit for 50% hardenite dirty water,mud slurry; such as building operation, emergency road repair exhaust and so on; also could use as clean water pump.

Slurry pumps are designed to handle liquids containing abrasive and coarse grained solids. It has a heavy duty design with a single stage axial inlet. It is also suitable for sand water mixtures and other related slurry

They are generally used for slurries containing high concentrations of erosive solids or where an Extremely heavy duty pump is required. Aojin pumps are available both metal and rubber lined corrosion and abrasion resistant materials. Discharge diameters -

We manufacture slurry pumps for various slurries in cement and concrete industry as well as other slurries across industries like pulp, clay and oil. Our slurry pumps are designed for sturdy operation with heavy duty cycles. Our pumps are precision manufactured to provide measured output or a continuous output as required. We provide two types of slurry pumps - peristaltic pumps and screw pumps, both used for positive flow of slurries. Please contact us with your requirements for further information on suitability and productivity.

Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo

Benefits: Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.  Wooden case with plastic inner packing.

Tex pump is a pump manufacturer for mining, construction, dredging and also a dredging serivce provider, We also provide refurbished toyo pumps and spare parts for replacement, We care every customer, the satisfaction from customer is always our best gift. Standard export packing.

Slurry pump

The versatile, fully lined Xinte® ZTNM series slurry pump offers a wide range of seal and rubber (wear-resistant metal) liner configurations allowing the pump to be tailored to the customer¡¯s specific application. Range of Applications of ZTNM Slurry Pump ZTNM series horizontal and cantilever centrifugal slurry pumps are used widely throughout the beneficiation section of the mining industry. ZTNM slurry pumps are also widely used for the disposal of ash from power plants the manufacture of fertilizers, and the long distance transportation of coal and minerals. Increased global focus on the environment and energy consumption will certainly generate much wider uses for slurry pumping in years to come. Design Features 1, Bearing assembly ¨C A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. 2,Liners ¨C Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Sandwich Plate Carton.

The L series slurry pumps are cantilevered, horizontal, centrifugal, slurry pumps. They are suitable for delivering less abrasive, low dense slurry in the metallurgical, mining, coal and construction material industry. The shaft seal is adopted both gland seal and centrifugal seal. The L series slurry pumps have a high rate of revolution and small volume saving floor area. The frame plates have changeable, wear-resistant metal liners or rubber liners upon request and the impellers are made of wear-resistant metal or rubber. The discharge branch can be oriented to any of the eight different positions for installation and application upon request.

Pump of ZJ series Specification: D25-400mm Q12-5040m3/h H5-90m Function Introduction The products are popular among the mining, metallurgy, electric power and other industries in all places of China. The company has provided tens of thousands of matching pumps for about one hundred major projects, which include Antaipu Opencast Mine, Qinshan Nuclear Power Station, Shiheng Power Plant, Pingwei Power Plant, the Qilu 300,000 ton ethylene project, Bohai Sea oil drilling platform, Dexing Copper Mine, the second-phase construction of the Baoshan Iron and Steel Group and so on.