EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS EnzoPlast TS 8 has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. EnzoPlast TS 8 is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Belt press juicing machine for fruit vegetable Use for : 01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice 04.Extraction of medicinal juice 1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee 2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life 3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise 4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content. 5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost 6. Juice yield 85% Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw, filter belt speed 1.5-3.5m Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm Width 1475-3430mm high 1820-2420mm
Present in a variety of designs, materials, and colours, our slides are ready to add a touch of elegance and beauty to your decorations and fashion. Create charming decorations, unique clothes, and special accessories with our slices. Unveiling a Tapestry of Lace Delights: Design Diversity: Explore an extensive range of lace designs to suit your every need, from classic patterns to modern masterpieces. Material Medley: Choose from a variety of high-quality materials, including cotton, silk, linen, and polyester, to perfectly complement your creations. Color Symphony: Find the perfect lace hue to match your decor and fashion aspirations, from subtle neutrals to vibrant accents. Effortless Elegance: Experience the ease of working with our lace, effortlessly cut, shaped, and sewn into your designs. Enduring Beauty: Our lace is crafted from premium materials, ensuring long-lasting durability and timeless elegance
Features: Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Outer Layer: Water-repellent non-woven 4. Middle Layer: High level static filtration non-woven 5. Inner Layer: Microfilter Thermal-bond non-woven 6. Nose band: PE iron wire
Features 1. Size: for adult 2. Available for 3 layers or 4 layers 3. OEM/ODM/Customization are available The design creates more space between the mask and the mouth, leading some wearers to say they're more comfortable than typical respirators. There are three kinds of masks with different functions- Standard, Smile and Sport. Standard: Ergonomic design first seamlessly around your face line, securing sufficient space for easier breathing and a more comfortable wear.
Face Mask for Drinking and Whistling
Code 93100-Sï¼? For ages 6-12 Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3-ply, non-woven material, 99% BFE at 3 micron. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For kids 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Features: 1. Size: for adult 2. Available for 3 layers or 4 layers 3. OEM/ODM/Customization are available The design creates more space between the mask and the mouth, leading some wearers to say they're more comfortable than typical respirators. Smile : Mask with clear window that let you read a person's lip is more readily and available.
Features 1. Size: for adult 2. Available for 3 layers or 4 layers 3. OEM/ODM/Customization are available The design creates more space between the mask and the mouth, leading some wearers to say they're more comfortable than typical respirators. Sport: Our breathable sport face mask keeping you feeling fresh & dry, when people, great for exercise.
Code 93100: 3-ply, non-woven material 99% BFE at 3 micron Features: Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
High Anti-Leak, High Air-Permeability, High Filtration Provide full protection. Upgraded anti-leak and protection. Patented anti-leak side films, effectively prevent side leaks. Widen ear bands reduce the feeling of being tied up. Excellent elasticity ear bands fit the face snugly, reducing side leaks. 1.Size: for adult 2.Available for 3 layers 3.OEM/ODM/Customization are available
Diamond Shape: The Guinness World Record 2022. Largest Surgical Face Mask In The World The Guinness World Records announces that the mask is 50 times larger than a standard face mask. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: as photo 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
0.1um micron for (PFE) 95%(BFE) 99% The 3D design structure provides better wearing, and with foam nose cover for excellent fitness. Uses a low-allergenic filter layer without latex. 1.Size: for adult 2.Material: Non-woven, melt-blown, P.P. spun bond. 3.Total layers: 5 layers 4.Color: White
Wearing a mask is a fashion unique, inspires imagination, cultivates the creative spirit, improves school or company image, and dresses stylishly and effectively to prevent covid-19. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: as photo 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 52110: For surgical wound drainage Features Nature rubber formation. Non-sterile. Smooth tubing wall, both outside & inside. X-ray opaque, ready to implant. Peel apart package. Length : 18(12 is also available) Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1
Code 85750: Anchor wound dressings on fragile or at-risk skin Features Anchors wound dressings on fragile or at-risk skin. Secures tubing and devices. Gentle yet secure, waterproof and snug fit. Color: Flesh Tear type: Easy-tear or normal Size: 2.50 cm x 150 cm 5.00 cm x 150 cm
Code 85200: Made of non-woven fabric. Hypoallergenic adhesive, leaves little or no residue Features: Made by non-woven fabric. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Strong adhesion, yet easy to remove. Color: White or flesh Size: 1.25 cm x 9.14 M (1/2x10yds) 2.50 cm x 9.14 M (1x10yds) 5.00 cm x 9.14 M (2x10yds) 7.50 cm x 9.14 M (3x10yds)
Code 85300: Made of polyethylene with acrylic coating. Features Made of polyethylene with acrylic coating. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Perforated for easy tearing by hand. Thin, flexible and strong adhesive Material: Polyethylene Size: 1.25 cm x 9.14 M (1/2''x10yds) 2.50 cm x 9.14 M (1''x10yds) 5.00 cm x 9.14 M (2''x10yds) 7.50 cm x 9.14 M (3''x10yds)
