Lead is a heavy metal pollutant. The reason for its high toxicity is that it can be accumulated in the human body. Once it enters the human body, it is difficult to remove it, and it can directly damage the nervous system of the human body, causing anemia, nerve dysfunction and kidney damage. It affects brain function such as mental development and memory in infants and young children. Suzhou Bojie Resin Technology Co., Ltd. provides ion exchange resin for lead removal, with high exchange capacity, good mechanical strength and convenient regeneration. It is widely used in the removal of heavy metals in wastewater.
Lead is a widely distributed element in nature and one of the elements commonly used in industry. Lead and soluble lead salts are toxic, and lead-containing wastewater is a serious hazard to human health and animal and plant growth. According to reports, lead loss is 4.54-6810mg for every battery produced, followed by the petroleum industry to produce gasoline additives. The lead content in wastewater exceeds the national standard by a hundred times, posing a great threat to groundwater sources. If it is not treated, it will inevitably bring great harm to the environment and society. The use of ion exchange to treat lead-containing wastewater has a good lead removal effect, and industrial lead-containing wastewater can achieve discharge up to standard, with little harm to environmental pollution. The ion exchange resin has a long service life and can be repeatedly used for regeneration. Suzhou Bojie Resin Technology Co., Ltd. provides lead removal resin, which has the advantages of high selectivity, easy adsorption and desorption regeneration, reusable, good controllability and simple operation, especially suitable for the treatment of lead-containing wastewater.
Radium is a chemical element whose chemical symbol is Ra. Its atomic number is 88. It is a silver-white alkaline earth metal with ravdioactivity. When uranium is leached from uranium ore by sulfuric acid, radium sulphate is present in the slag, and then converted into radium chloride. The strontium salt is used as a carrier to carry out fractional crystallization, and a pure radium salt can be obtained. Suzhou Bojie Resin Technology Co., Ltd. provides high efficiency radium removal resin with high exchange capacity, high selectivity, fast removal rate, low environmental requirements, mild operating conditions, simple equipment, high processing precision, reusable and cost saving. Wait, economical and practical. Related Products: Gold extraction resin Silver extraction resin Uranium extraction resin Nickel extration resin Calcium and magnesium removal resin from brine Mercury removal resin Copper removal resin Cobalt removal resin from wastewater Special resin for chromium removal
Radioactive waste is produced in large quantities along with the development of the nuclear industry, and radioactive waste water can cause great harm to the environment. Radon has a large share of radioactivity, so removing plutonium is critical. Ion exchange resins are favored for their excellent selectivity and high temperature resistance. Suzhou Bojie Resin Technology Co., Ltd. provides ion exchange resin for removing strontium ions. It has good selectivity, obvious removal effect, simple regeneration method, good mechanical strength, and economical efficiency. It is widely used in the removal of radioactive waste. Related resins : Tungsten and molybdenum extraction smelting resin (tungsten and molybdenum adsorption, purification Uranium extraction and separation resin (uranium adsorption, purification) Radioactive metal adsorption separation resin (element treatment of uranium, radium, thorium, thorium, etc.) é?¼ extraction smelting resin (é?¼ adsorption, purification) Extraction of smelting resin (cobalt adsorption, purification) Gallium extraction smelting resin (gallium adsorption, purification) Vanadium extraction smelting resin (vanadium adsorption, purification)
Palladium extraction ion exchange resin Palladium belongs to the platinum group metal and has excellent properties such as catalytic action, chemical stability, thermoelectric stability and beautiful color. It is widely used in automotive, electronics, pharmaceutical, petrochemical, fuel cell and other industrial fields. Especially in combination with nanotechnology, it is widely used in high-tech fields and modern industries, and has achieved good economic and social benefits. The resin extraction method has the advantages of high separation efficiency, simple operation, recyclable use of the resin, and the like, and is a common extraction method for palladium. Suzhou Bojie Resin Technology Co., Ltd. provides professional palladium element extraction resin with high selectivity and adsorption rate, simple regeneration and high regeneration rate. It is widely used in industrial palladium recycling. Related Products: Ion exchange resin Adsorption resin Cation exchange resin Anion exchange resin Mixed bed resin Copper recycled resin Special resin for copper recycling Heavy metal resin Compound resin Heavy metal chelating resin Nickel resin Cobalt resin Zinc removal resin Chrome resin Gold recycled resin
Special Resin for Gallium extraction Gallium is a rare blue-white trivalent metal element that is soft and hard and brittle at low temperatures. Usually obtained as a by-product from the extraction of aluminum from bauxite or the extraction of zinc from zinc ore - the element symbol Ga. Can be alloyed. It is used to manufacture semiconductor GaAs, GaAs, ytterbium semiconductor doping elements; pure gallium and low-melting alloys can be used as heat exchange medium for nuclear reaction; thermometer filling material; and catalyst for diesterification in organic reaction. The special resin for gallium extraction provided by Suzhou Bojie Resin Technology Co., Ltd. can effectively extract gallium, has strong selectivity, has superior physical and chemical stability, good resistance to mechanical and osmotic shock, long service life and wear resistance. , acid and alkali resistant, simple equipment, easy to operate, suitable for industrial large-scale production. Related Products: Gold extraction resin Silver extraction resin Uranium extraction resin Nickel extration resin Calcium and magnesium removal resin from brine Mercury removal resin Copper removal resin Cobalt removal resin from wastewater Special resin for chromium removal
Phosphorus-containing wastewater mainly comes from chemical, biochemical and metal surface treatment industries. Characteristic pollutants include fluoride, total phosphorus, organic phosphorus, inorganic phosphorus, phosphate and other harmful substances. Phosphorus will cause eutrophication of water bodies, so that water bodies contain Oxygen is extremely degraded, endangering the ecological environment Suzhou Bojie Resin Technology Co., Ltd. provides dephosphorization resin, which has the characteristics of large exchange capacity, high mechanical strength, high temperature resistance and convenient regeneration. It is widely used in petrochemical industry. more products: Tungsten-molybdenum extraction smelting resin (tungsten-molybdenum adsorption, purification Uranium extraction and separation resin (uranium adsorption, purification) Radioactive metal adsorption separation resin (element treatment of uranium, radium, thorium, thorium, etc.) Gallium extraction smelting resin (gallium adsorption, purification) Vanadium extraction smelting resin (vanadium adsorption, purification) Rare earth element extraction resin (rare earth element adsorption, purification) Special resin for gold extraction (primary gold mine, associated gold mine) Mercury removal special resin (mercury mine wastewater, mercury-containing waste comes out again) Precious metal recycled resin (gold, silver, platinum, palladium, rhodium, ruthenium, etc.) Except heavy metal resin (copper, zinc, nickel, chromium, lead, iron, manganese, etc.)
Arsenic selective ion exchange resin for drinking water, surface water and industrial waste water. The resin can be customized according to customers' requirements.
Item Name Strong acid cation exchange resin (Gel) Bairy Resin Article#:001x 7 Competitive EquivalentsAmberlite IR-120; Dowex-50; Lewatit-100 Application: It is used mainly to soften hard water and produce pure water, as well as used in the hydro-metallurgy and sugar producing and medicine and no sodium glutamate industry, it can be used as catalyzer and dehydrating agent. Typical physical and chemical properties: Matrix StructureStyrene series AppearancePalm yellow to burnt brown spherical grain Ionic formNa Moisture content (%)45.00~50.00 Total exchange capacity (mmol/g)4.50 Total exchange capacity (mmol/ml)1.90 Shipping weight (g/ml)0.77~0.87 True density (g/ml)1.250~1.290 Particle size range (%)(0.315mm~1.250mm)95.0 Lower limit size (%)(ï¼?0.315mm)?¤1.0 Effective size (mm)0.400~0.700 Uniformity coefficient?¤ 1.60 Sphericity after attrition % 90.00
Product Name Gold extraction special resin Bairy Resin Article#: BRA-800 Main Applicationï¼?Gold (Au.) extraction / adsorption, it is instead of activated carbon to extract gold from from cyanide. Typical physical and chemical properties: Name of Index Index Appearance Milk white non-transparent spherical grain Leave factory type Chlorine Moisture % 50.00-60.00 Complete exchange capacity mmol/g â?¥4. 5 Volume complete exchange capacity mmol/ml â?¥1.20 Bulk density g/ml 0.60-0.75 True density g/ml 1.030-1.06 Particle size range % (0.6-1.50mm)â?¥95
Bojietech offers a complete line of EDM resins ready to use mixed bed and separate component versions specifically designed to meet the needs of the EDM market. The ratio of component resins has been specifically tailored for full demineralization of water to provide the maximum throughput of water of the highest quality. It is suitable for use in regenerable or non-regenerable cartridges and other suitable vessels. 25L/bag or 5L/bag
Ion exchange resin for water treatment Gel type strong acid cation exchange resin is used in water demineralization SCG08 is a premium grade Gel type strong acid cation exchange resin, with crosslinking 8% DVB , which is produced by sulfonated styrene-DVB copolymer. The particle size is in standard gaussian distribution with 0.315-1.25mm >95%. SCG08 shows a better oxidative stability and a better regeneration efficiency than SCG07, so SCG08 in hydrogen form is intended for demineralization use in mixed beds. Equal to Amberlite IR120h, Purolite C100 Basic feature Application:Mixed bed system for water demineralization Matrix:ST-DVB Type: Gel Functional group:sulphonic acid Ionic form: hydrogen & sodium form Appearance:amber Spherical beads Physical and Chemical Characteristics 1 Total exchange capacity (eq/L) Na+ form â?¥1.9 2 Moisture retention (%) Na+ form 47-56 3 Particle size range (%) 0.315-1.25 mm â?¥95 4 Whole beads count (%) â?¥95 5 Shipping weight (g/ml) Na+ form 0.75-0.85 6 Specific gravity (g/ml) Na+ form 1.15-1.24 7 Uniformity coefficient
"Chromium removal ion exchange resin The ion exchange method for chromium removal has good practical performance, low cost, convenient operation, simple equipment, good water quality, stable performance, and easy recycling. The efficiency is high, and chromium and water can be recovered and reused. Compared with the traditional method, the amount of sludge is reduced by about 80%, and the discharge standard can be met. Jiangsu Kingshan New Material Co., Ltd. is a special ion exchange resin for chromium removal. It has high exchange capacity, strong regeneration capacity and good mechanical strength. It is widely used in the removal of chromium from wastewater."
Calcium and Magnesium removal ion exchange resin from lithium solution Salt lake brine contains trace amounts of calcium and magnesium ions. In order to purify lithium solution, calcium and magnesium ions need to be removed. The removal of calcium and magnesium ions by ion exchange resin is a simple and effective method. The operation is simple, the resin may be regenerated, and it has high economic benefits
Product Name Weak acid cation exchange resin (Macroporous) Sanxing Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g)
ATM84 is a high capacity mixed bed ion exchange resin consisting of a mixture of a gel type I strong base anion resin and a gel strong acid cation resin for direct purification of water. As the resin exhausted, the resin's color will be changed from green to blue. It is suitable for use in regenerable or non-regenerable cartridges, for deionization with high silica removal efficiency and refine water for electrical home applications.
Resin trap filter is generally installed at the back end of the negative bed, positive bed, and mixed bed of the ion exchanger. When the quality of the resin is poor and the water pressure disturbance is large (especially high pressure disturbance). When the resin is damaged, the resin will enter the back-end desalted water system and affect the normal operation of other equipment in the system, so a resin trap filter screen needs to be installed. On the water system pipeline near the outlet of equipment containing resin such as ion exchangers, install a resin trap filter screen with a hole diameter much smaller than that of the resin. It also has a flushing function. When the resin passes through, it can be intercepted and captured by the filter screen. At the same time, it is automatically flushed through the front and rear differential pressure to discharge the captured resin out of the system. Resin trap filter is used as a supplementary equipment of the ion exchanger to prevent the trapped resin from leaking into the desalted water system when the water outlet device fails. To ensure the normal operation and use of subsequent equipment. It has small size and high recycling efficiency. Our resin trap filter uses stainless steel wedge wire screen as raw material. The stainless steel trapezoid profile wire filter screen has high capture efficiency, large flow area, good mechanical strength and low pressure.
Bojie Zinc in ion exchange resin adsorption wastewater Zinc is widely used, zinc is the normal development of the human body is a necessary element. But at the same time zinc in wastewater is a heavy metal, into the human body or the environment beyond a certain limit will cause poisoning or environmental pollution. Ion exchange resin can effectively remove all kinds of metal ions in wastewater, with convenient separation, reusability and other advantages, can greatly reduce the cost of use. Suzhou Bojie Resin Technology Co., Ltd. provides ion exchange resin adsorption zinc, ion exchange resin with adsorption selective, rich effect, simple regeneration, long use cycle and so on, so that wastewater discharge indicators easy to meet the standard.
Product Name Weak acid cation exchange resin (Macroporous) Bairy Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g) â?¥10.80 Total exchange capacity (mmol/ml) â?¥4.40 Shipping weight (g/ml) 0.72~0.80 True density (g/ml) 1.14~1.20 Particle size range (%) (0.315mm~1.250mm)â?¥95.0 Lower limit size (%) (ï¼?0.315mm)â?¤1.0 Effective size (mm) 0.400~0.700 Uniformity coefficient â?¤Â 1.60 Sphericity after attrition  % â?¥Â 90.00 Reference indexes in using PH range 4~14 Max. operation temperature (â??) 100 Swelling upon complete conversion (%) â?¤Â 70 Working exchange capacity (mmol/L) â?¥Â 1600 Working flow rate (m/h) 15~30
It is mainly used to soften hard water,produce pure water and for condensate purification; It is also using waste water treatment and heavy metal recovery.
