Lead is a widely distributed element in nature and one of the elements commonly used in industry. Lead and soluble lead salts are toxic, and lead-containing wastewater is a serious hazard to human health and animal and plant growth. According to reports, lead loss is 4.54-6810mg for every battery produced, followed by the petroleum industry to produce gasoline additives. The lead content in wastewater exceeds the national standard by a hundred times, posing a great threat to groundwater sources. If it is not treated, it will inevitably bring great harm to the environment and society.
The use of ion exchange to treat lead-containing wastewater has a good lead removal effect, and industrial lead-containing wastewater can achieve discharge up to standard, with little harm to environmental pollution. The ion exchange resin has a long service life and can be repeatedly used for regeneration.
Suzhou Bojie Resin Technology Co., Ltd. provides lead removal resin, which has the advantages of high selectivity, easy adsorption and desorption regeneration, reusable, good controllability and simple operation, especially suitable for the treatment of lead-containing wastewater.
Lead is a heavy metal pollutant. The reason for its high toxicity is that it can be accumulated in the human body. Once it enters the human body, it is difficult to remove it, and it can directly damage the nervous system of the human body, causing anemia, nerve dysfunction and kidney damage. It affects brain function such as mental development and memory in infants and young children. Suzhou Bojie Resin Technology Co., Ltd. provides ion exchange resin for lead removal, with high exchange capacity, good mechanical strength and convenient regeneration. It is widely used in the removal of heavy metals in wastewater.
Radium is a chemical element whose chemical symbol is Ra. Its atomic number is 88. It is a silver-white alkaline earth metal with ravdioactivity. When uranium is leached from uranium ore by sulfuric acid, radium sulphate is present in the slag, and then converted into radium chloride. The strontium salt is used as a carrier to carry out fractional crystallization, and a pure radium salt can be obtained. Suzhou Bojie Resin Technology Co., Ltd. provides high efficiency radium removal resin with high exchange capacity, high selectivity, fast removal rate, low environmental requirements, mild operating conditions, simple equipment, high processing precision, reusable and cost saving. Wait, economical and practical. Related Products: Gold extraction resin Silver extraction resin Uranium extraction resin Nickel extration resin Calcium and magnesium removal resin from brine Mercury removal resin Copper removal resin Cobalt removal resin from wastewater Special resin for chromium removal
Radioactive waste is produced in large quantities along with the development of the nuclear industry, and radioactive waste water can cause great harm to the environment. Radon has a large share of radioactivity, so removing plutonium is critical. Ion exchange resins are favored for their excellent selectivity and high temperature resistance. Suzhou Bojie Resin Technology Co., Ltd. provides ion exchange resin for removing strontium ions. It has good selectivity, obvious removal effect, simple regeneration method, good mechanical strength, and economical efficiency. It is widely used in the removal of radioactive waste. Related resins : Tungsten and molybdenum extraction smelting resin (tungsten and molybdenum adsorption, purification Uranium extraction and separation resin (uranium adsorption, purification) Radioactive metal adsorption separation resin (element treatment of uranium, radium, thorium, thorium, etc.) é?¼ extraction smelting resin (é?¼ adsorption, purification) Extraction of smelting resin (cobalt adsorption, purification) Gallium extraction smelting resin (gallium adsorption, purification) Vanadium extraction smelting resin (vanadium adsorption, purification)
Phosphorus-containing wastewater mainly comes from chemical, biochemical and metal surface treatment industries. Characteristic pollutants include fluoride, total phosphorus, organic phosphorus, inorganic phosphorus, phosphate and other harmful substances. Phosphorus will cause eutrophication of water bodies, so that water bodies contain Oxygen is extremely degraded, endangering the ecological environment Suzhou Bojie Resin Technology Co., Ltd. provides dephosphorization resin, which has the characteristics of large exchange capacity, high mechanical strength, high temperature resistance and convenient regeneration. It is widely used in petrochemical industry. more products: Tungsten-molybdenum extraction smelting resin (tungsten-molybdenum adsorption, purification Uranium extraction and separation resin (uranium adsorption, purification) Radioactive metal adsorption separation resin (element treatment of uranium, radium, thorium, thorium, etc.) Gallium extraction smelting resin (gallium adsorption, purification) Vanadium extraction smelting resin (vanadium adsorption, purification) Rare earth element extraction resin (rare earth element adsorption, purification) Special resin for gold extraction (primary gold mine, associated gold mine) Mercury removal special resin (mercury mine wastewater, mercury-containing waste comes out again) Precious metal recycled resin (gold, silver, platinum, palladium, rhodium, ruthenium, etc.) Except heavy metal resin (copper, zinc, nickel, chromium, lead, iron, manganese, etc.)
Arsenic selective ion exchange resin for drinking water, surface water and industrial waste water. The resin can be customized according to customers' requirements.
Calcium and Magnesium removal ion exchange resin from lithium solution Salt lake brine contains trace amounts of calcium and magnesium ions. In order to purify lithium solution, calcium and magnesium ions need to be removed. The removal of calcium and magnesium ions by ion exchange resin is a simple and effective method. The operation is simple, the resin may be regenerated, and it has high economic benefits
"Chromium removal ion exchange resin The ion exchange method for chromium removal has good practical performance, low cost, convenient operation, simple equipment, good water quality, stable performance, and easy recycling. The efficiency is high, and chromium and water can be recovered and reused. Compared with the traditional method, the amount of sludge is reduced by about 80%, and the discharge standard can be met. Jiangsu Kingshan New Material Co., Ltd. is a special ion exchange resin for chromium removal. It has high exchange capacity, strong regeneration capacity and good mechanical strength. It is widely used in the removal of chromium from wastewater."
We deals in the following products :- 1) PVC Resin 2) Caustic Soda Flakes
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
