BCPL manufactures 990 Ltr water capacity tanks. The manufacturing unit is equipped to design and manufacture tanks up to 3000 liters of water capacity. These tanks are heat-treated in a state-of-the-art NC control furnace and painted with polyurethane paint with an undercoat of epoxy primer. The powder coated surface is also supplied on request. These cylinders are supplied to Indian oil and marketing companies such as Indian Oil Corporation, Hindustan Petroleum, Bharat Petroleum and to companies such as TOTAL, Super Gas and exported to other countries.
Water storage tanks can be installed in any number of commercial or industrial application processes. We design our water storage tanks based on your needs, with the latest technological resources and using the best quality materials pursuant to international standards. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition. Glass-Fused-to-Steel tank Applications
To feed the growing world population, increasing agriculture production is required. under such circumstance, premium containment solution is required for crops & forage storage, manure, sludge, irrigation during agriculture production. Agriculture waste such as livestock and poultry manure and energy crops are an important part of the global growth of green renewable energy solutions. Center Enamel Glass-Fused-to-Steel Tanks are made of special steel plate, special sealant, self-locking bolt, and the service life for more than 30 years. After pretreatment, the special steel plate is coated with two or three layers of enamel coating on both sides. After the heat polymerization, a strong binding force is formed between the coating and the steel plate. The protective layer formed by the coating can not only prevent corrosion of the tank body, but also has the function of strong acid and alkali resistance and strong abrasion resistance. Center Enamel Glass-Fused-To-Steel Water Tanks for irrigation in agriculture. In order to ensure the normal growth of crops and obtain high and stable yield, it is necessary to supply crops with sufficient water. Under natural conditions, crop water requirements are often not met due to insufficient precipitation or uneven distribution. Therefore, artificial irrigation is necessary to make up for the lack of natural rainfall. Also, we can use Glass-Fused-To-Steel Tanks to Collect and store rainwater that falls onto buildings and using it for agricultural purposes, which can cut the bill of irrigation water. That is why we choose Glass-Fused-To-Steel Tanks as for irrigation in agriculture, also can be widely used in vegetables, flowers, orchards, medicinal plants planting places.
The acid and alkali resistance bolted steel industrial water tanks also called glass fused to steel tank, which combines the strength and flexibility of steel and the corrosion resistance of glass.Bolted steel industrial water tanks are assembled by Enamel sheet,Special sealant and Self-locking bolts. The enamel steel plate is coated with two layer of enamel on both sides, and then burned with 900 high temperature, makes the enamel and steel plate bond together strongly. The strong bonding enamel coating not only can prevent the corrosion of industrial water tank, but also resistance to strong acid and strong alkali. Center Enamel's industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011,and our industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Bolted Steel Industrial Water Tanks Specification Coating Color Standard dark green and blue or customized Coating thickness 0.25-0.45mm Acid and alkalinity proof Standard PH: 3~11, Special PH:1~14 Adhesion 3.450N/cm Hardness 6.0 (Mohs) Service life â?¥30 Years Holiday test >1500V Permeability Gas liquid impermeable Easy to clean Smooth, glossy, inert, anti-adhesion Corrosion resistance Excellent, suitable for wastewater, salt water, sea water, high sulfur crude oil, salt fog organic and inorganic compounds About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
ISO9001-2000 GFS Agriculture Water Storage Tank is widely used for Farm Irrigation Agriculture water storage tank is made up of glass fused steel with special sealant & self-locking bolts, which are designed for optimum energy efficiency, durability, and long-lasting performance. The Glass Fused to Steel construction of these bolted tanks is exceptional for the storage of potable water, wastewater, petroleum, chemicals, and dry bulk and in such applications, power generation stations, standpipes, frac processing, fish ponds, sludge tanks, trickling filters, high temp fermentation plants. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing, and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
A fire-protection water storage tank can make all the difference when a fire breaks out. Water is the most common extinguishing agent for combating fires. Water is so fundamental to firefighting that a good water supply is one of the most important factors in municipal fire protection. Fire protection water storage tanks are not just for residential properties and have been developed to the point where they are now a common sight at many commercial and industrial construction sites, including airfields, airports, schools, universities, hospitals, prisons, police stations, office buildings, data centers, and other facilities that need a reliable or redundant water supply. Having these tanks on commercial properties takes away the worry of having a shortage of water should a fire occur. In many cases, fire protection water storage tanks provide the water necessary for fire suppression purposes inside the building. Center Enamel offers fire protection water storage tanks from 20 to 18000 steres. All of our fire water tanks are certified by NSF61. This standard provides requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection. Center Enamel is a China manufacturing company located in Shijiazhuang, Hebei province. Our product categories range from fire water tanks, Glass-Fused-to-Steel tank, wastewater tank, biogas tank, anaerobic digesters, dry bulk storage tanks, and other storage solutions. Benefits of Center Enamel Fire Water Storage Tank? Short construction period, cost-effective tank solution Superior corrosion resistance, service life is more than 30 years Easy to install, no need for big installation equipment and/or very skilled labors Tank volume can be easily expanded It can be dismantled, removed and relocated Elegant appearance, tank color can be customized
The acid and alkali resistance bolted steel industrial water tanks also called glass fused to steel tanks, which combines the strength and flexibility of steel and the corrosion resistance of glass. Bolted steel industrial water tanks are assembled by Enamel sheet, Special sealant and Self-locking bolts. The enamel steel plate is coated with two layers of enamel on both sides and then burned with 900 high temperature, makes the enamel and steel plate bond together strongly. The strong bonding enamel coating not only can prevent the corrosion of industrial water tank, but also resistance to strong acid and strong alkali. Center Enamel's industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011,and our industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone, etc., to make sure the tank structure's adequate security in long-term service life.
Glass Fused to Steel Water Storage Tanks, also known as Glass-Lined-Steel Water Storage Tanks, is the ultimate tank solution utilising a proven product with significant advantages.After firing at 820°C-930°C high temperature, the molten glass reacts with the steel plate surface to form an inert and inorganic bond, which combines the strength and flexibility of steel and outstanding corrosion resistance of glass, so Glass-Fused-to-Steel tanks can provide many advantages over standard epoxy or welded painted storage tanks.Center Enamel is a well established, world-leading storage tanks manufacturer in China. Glass Fused to Steel Water Storage Tanks Specifications What is Glass-Fused-To-Steel ? Glass-Fused-to-Steel is a unique tank finish. Two materials are fused together to achieve the best of both materials the strength and flexibility of steel combined with the corrosion resistance of glass. Applied to both interior and exterior surfaces, Glass-Fused-to-Steel is able to provide many years of trouble free service in harsh environments. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel supply a range of Glass-Fused-to-Steel fire protection water storage tanks suitable for use in automatic sprinkler systems and fire hydrant systems. We design, manufacture and installation these fire tanks for over 30 years, we are the first Glass-Fused-to-Steel tanks manufacturer in China. With compliance to NSF61,Center Enamel s standard range of water storage tanks for fire protection are available in 20 steres to 20,000 steres and meets international water tank design standards. Glass-Fused-to-Steel tanks are made from individual sections that have been manufactured and finished in a controlled factory setting. This allows each section to be formed according to strict structural specifications, with quality bends, welds and surface preparations that are monitored with compre hensive quality control measures. Once the sections are complete, they are powder-coated in a tightly-controlled environment, which results in a durable finish that virtually eliminates corrosion and maintenance issues; unlike field-welded tanks, which must be finished at the installation site, often resulting in an imperfect and inconsistent finished coating that is susceptible to corrosion and other damage. Glass-Fused-to-Steel tanks are created with superior materials that meet AWWA, NFPA, and FM Global standards, resulting in a long-lasting, durable product. They offer lifespans that are similar to, or longer than, concrete or welded tanks. Unlike competing products, they can easily be repaired by unbolting the damaged section, replacing it and installing new gaskets and fasteners. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. CEC Glass-Fused-to-Steel tanks are wildly used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Product’s name: Injection mold Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding. We also undertake injection, blow or rotary molding works from Toys to Big bins or water tanks, floating docks, road barrier etc. We can do custom design plastic parts or components. Water Tanks ( Roto Molding process)
Center Enamel Co., Ltd is the industry leader and has been designing and manufacturing and installing Stainless Steel Bolted frac sand storage tanks for more than 30 years. We provide high quality Stainless Steel Bolted frac sand storage tanks. The ability to place the bolted tanks in shipping containers allows us to service the entire world. With more than 10, 000 storage tanks successfully installed in 65 countries and thousands of applications, no other Asian company can match Center Enamelâ??s bulk tank experience in the design, manufacture and installation of bulk storage tanks .We are one of the few manufacturing companies that fabricates our own Stainless Steel Bolted frac sand storage tanks ensuring product quality. The construction speed of the Stainless Steel Bolted storage tank can be increased by three times, saving the construction and life cycle cost for our customer. All tank panels are manufactured in the factory and shipped in full to the construction site in time. Experience, expertise and efficiency make Center Enamel the best choice for buying frac sand silos . Our frac sand storage tanks capacity ranges from 20m�³ to 20,000 m�³, Our Stainless Steel Bolted storage tanks can withstand abrasive wear and have the longest service life of any tank. After decades of field testing and application, Center Enamel bolted steel frac sand storage tank is the best choice for all dry bulk storage tanks on the market. Stainless Steel Bolted Frac Sand Storage Tanks Specifications Coating color dark blue, dark green, white, and customized A standard steel plate size effective size 2400mm x 1200 m Steel plates thickness 3mm - 12mm, depends on the diameter & height Coating thickness 0.25mm - 0.4mm, two coatings internal and external Acid and alkalinity proof standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 Adhesion 3,450N/cm Elastic same as steel sheet, around 500KN/mm Hardness 6.0 Mohs Service life >30 years Spark test >1500 V Permeability gas and liquid impermeable Easy yo clean smooth, glossy, inert, anti-adhesion Corrosion resistance excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds
Brief introduction of Glass Fused to Steel Waste Water Storage Tanks Glass Fused to Steel Waste Water Storage Tank has enjoyed increasing popularity over the past years . Glass Fused to Steel Waste Water Storage Tank is widely used in the water and wastewater treatment industry with excellent corrosion resistance for both internal and external coated with corrosion-resistant silica glass. In the wastewater treatment sector , Glass Fused to Steel Waste Water Storage Tanks can be used as aeration tanks, aerobic reactor, water purifying tanks, leachate storage, trickling filters. The tanks are constructed in full accordance with the applicable AWWA D103 Six good reasons to choose Glass Fused to Steel Waste Water Storage Tanks - Minimal maintenance costs - Colors can be customized and will not fade away with time - Tanks are bolted, it is easy to ship and dismantle - Size is expandable - Simple installation, do not need big equipment for erection, cost-effective - Over 30 years service life Our advantages . The largest and most professional manufactory in China . Tanks are up to NSF- 61 and AWWA D-103 standards . More than twenty years' experience . Already successfully built more than 2000 tanks worldwide . Excellent after -service and professional team . Time-saving and cost-effective Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Wastewater storage tanks is a kind of common wastewater treatment equipment in the field of wastewater treatment. There are many kinds of complicated corrosion forms in wastewater, such as acid-base corrosion, atmospheric corrosion, abrasion, penetration type expansion crack and microbial corrosion of bacteria and algae, which seriously affect the service life of the wastewater treatment tank. Therefore, the wastewater treatment needs to use an excellent performance Glass-Fused-To-Steel tank to meet or exceed environmental standards. Center Enamel provides a reliable, durable and high-quality wastewater storage solution. Center Enamel Glass-Fused-To-Steel tank is the best option for wastewater storage. Center Enamel's Glass-Fused-to-Steel Tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our GFS tank engineers make the tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., Center Enamel storage solution to agricultural industry offers the following benefits: 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are an exceptional solution in the harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shut down during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. The tank can be dismantled and rebuilt, gives continuous asset value to the product.
Center enamel supply various sizes of Dry Bulk Storage tanks which are meet all your grain storage needs, no matter indoor or outdoor storage, whether with or without hopper substructure. Our grain storage silos are food grade. The capacity of dry bulk storage silo range from 50m3 to 20,000m3, so no matter it is small or large we also can supply you, your demand is our most motivation. Center Enamel's dry bulk storage silos engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our storage tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Our dry bulk storage silos have been field-proven in FDA and other food applications. Our bolted steel dry bulk storage silos allow for fast and easy installation on your site regardless of weather conditions and without heavy crane equipment. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Glass Lined Steel Liquid Storage Tanks, also known as Glass-Fused-to-Steel Liquid Storage Tanks, these names all mean the same thing. Glass Lined Steel Liquid Storage Tanks combine the strength and flexibility of steel and the corrosion resistance of glass. The high-temperature fusion of glass to steel fired at 850�°C results in an inert, durable finish. Applied to both interior and exterior, the GFS technology is able to withstand the rigors of the construction site and provide many years of trouble-free service in harsh environments. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition. http://www.cectank.com/bolted-steel-tanks/ http://www.cectank.com/glass-fused-to-steel-tanks/ http://www.cectank.com/biogas-storage-tanks/ http://www.cectank.com/irrigation-water-tanks/ http://www.cectank.com/potable-water-tanks/ http://www.cectank.com/industrial-wastewater-storage-tanks/ http://www.cectank.com/sludge-digester-tank-and-sludge-storage-tank/ http://www.cectank.com/leachate-tanks/ http://www.cectank.com/dry-bulk-storage-tank/ http://www.cectank.com/agricultural-water-tanks/ http://www.cectank.com/anaerobic-digesters-and-biogas-tanks/ http://www.cectank.com/drinking-water-storage-tanks/ http://www.cectank.com/fire-protection-water-storage-tanks/ http://www.cectank.com/fire-sprinkler-water-storage-tanks/ http://www.cectank.com/liquid-storage-tanks/ http://www.cectank.com/municipal-water-tanks/ http://www.cectank.com/industrial-water-tanks/ http://www.cectank.com/process-water-tanks/ http://www.cectank.com/grain-storage-silos/ http://www.cectank.com/glass-fused-to-steel-bolted-water-tanks/ http://www.cectank.com/quality-industrial-effluent-tanks/ http://www.cectank.com/emergency-fire-water-tanks-for-commercial-residential-and-institutional-facilities/
Bolted Steel Leachate Storage Tanks Introduction Bolted Steel Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it. When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the groundwater. There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill operators first option is Center Enamels glass fused to steel leachate storage tanks. Center Enamel Co., Ltd is a manufacturer dedicated to enameled products since 1989. We have more than 30 years of experience in Glass-Fused-to-Steel leachate storage tanks design, manufacture, and installation. We are the largest and the most professional glass-fused - to -steel bolted tank supplier in China. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Our company has the most advanced production line and already passed the ISO9001 - 2008 quality system certificate. Center Enamel Tanks are produced and designed confirming to AWWA D103 - 09, OSHA and can meet European standards. The center Enamel is a unique enterprise that can produce an AA grade enamel sheet now. The company owns a professional R&D department with more than 30 person laboratory, and possess independent enamel formula research ability. According to customers' different operating requirements, we can customize various products.
In order to prevent the damage of sludge to the environment, we need to use the sludge storage tank for sludge storage and treatment. Sludge mainly comes from sewage treatment, high organic content, perishable, smelly. Sludge including activated sludge, humus sludge, concentrated sludge, are corrosive. Glass fused to steel tank is the best choice for sludge storage. It combines the strength of steel with the excellent chemical and physical corrosion resistance of glass, with a service life of over 30 years and low maintenance requirement. Center Enamel is a well established, world-leading storage tanks manufacturer in China. What is a glass fused steel tank? Glass fused to steel tanks are assembled from glass plates and secured with self-locking bolts. Then apply sealant to the joint clearance and bolt position to improve the air tightness of the tank. Easy to install, no large installation equipment and/or highly skilled workers are required, and can also be dismantled, moved and relocated. Center Enamel was founded in 1989, with 30 years of experience in the production of enamel products, it is not only the first manufacturer to produce glass fused steel cans in China, but also the most professional manufacturer of GFS cans in Asia. Our glass fuse to steel cans have been exported to the United States, Australia, Canada, Malaysia, Indonesia, Russia, united Arab emirates, panama, India, South Africa and more than 60 countries.
Sludge Holding Glass Fused Steel Tank In Green Energy Industrial Sludge Holding Tanks provide storage and blending for the thickened waste activated sludge, primary sludge, imported sludge, and scum before further Processing. Bio-reactors provide an environment in which living organisms, including bacteria and plankton (termed activated sludge), remove pollutants from the wastewater by feeding upon the organic matter and by absorption. Glass fused steel can be used as a sludge storage tank in such applications. Other than that, the glass fused steel tank can be used as any kind of storage tank or reactor. About Us Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture, etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition.