Hydraulic Cylinder For Rotary Drilling Rig Suppliers and Manufacturers

New, efficient and versatile hydraulic drill rig Rated Drilling Depth 400m Site Condition JKS400B Crawler Mounted Versatile Well Drilling Rig is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes.  Product Features JKS400B Crawler Mounted Versatile Well Drilling Rig is a new efficient and multifunctional drill rig, mainly applicable to the drilling process of well, monitor boreholes and geothermal boreholes. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, the penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions Winch can lift stuff upwards of 6m, facilitating installing pipes. Hydraulic supporters facilitate the rig erection on site without crane.   We are Crawler Mounted Drill Rig Supplier and Crawler Mounted Drill Rig Factory Dimension (L x W x H) 6800mm x 2250mm x 2650mm Working Size (W x H) 3250mm x 7500mm Weight 10.5T Rated Drilling Depth 400m Borehole Diameter 105ï½?350mm Engine Power  92kW Max. Lifting Force 20T Small Winch Lifting Force 1.5T Rotation Torque 9000N.m Rotation Rate 0ï½?40/80rpm Feeding Stroke 3800mm Lifting Speed 0ï½?18m/min Centralizer Height 0.7m Grade Ability 15° Hydraulic Generator (optional) 24kW/380V Flow of Foam Pump (optional) 20L/min

We are the leading manufacturers Drilling Rig. TECHNICAL SPECIFICATION : Drill Hole Diameter : Dia 4 1/2-6 1/2 Depth : 100 Meters Air Compressor : 450 cfm @ 150psi Mud Pump : 500 lpm @ 10 Bar Application : Water Well Optional : Blast hole drilling.

JKS400SH Crawler Mounted Telescoping Mast Drill Rig Crawler Mounted Versatile Well Drilling Rig hydraulic drilling rig, hydraulic drill rig The rig is able to place casing of 6 meters. Rated Drilling Depth 400m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes. Product Features JKS400SH crawler mounted telescoping mast drill rig is a new, efficient, multifunctional hydraulic well drilling rig, mainly applicable to the drilling process of well, monitor boreholes and geothermal boreholes. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, the penetration speed being dozens of times quicker than conventional rotation rigs.  The rig is able to handle casing size up to 6 meters. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions Hydraulic supporters used facilitate the rig erection on site without crane. Rated Drilling Depth 400m Borehole Diameter 140~350mm Engine Power 92kW Max. Lifting Force 20T Axial Pressure  ± 8T Lifting Force of Small Winch 1.5T Rotation Torque 8500N.m Rotation Rate 0ï½?40/80rpm Feeding Stroke 4300mm+2600mm Hydraulic Supporting Leg Stroke 1650mm Lifting Speed 0ï½?25m/min Centralizer Height 0.8m Grade Ability 15° Dimension (L x W x H) 7.4m x 2.25m x 2.85m Weight 13.5T Hydraulic Generator 24kW/380V (optional) Flow of Centrifugal Mud Pump / Flow of Plunger Mud Pump /

JKS1000 Crawler Mounted Versatile Well Drilling Rig Crawler Mounted Versatile Well Drilling Rig hydraulic drilling rig, hydraulic drill rig A new, efficient and versatile hydraulic well drilling rig Rated Drilling Depth 1000m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes, dewatering boreholes, relief boreholes and gas layers and other exploitation projects.  Product Features JKS1000 crawler mounted versatile drill rig is a new, efficient and multifunctional well drilling rig, mainly applicable to the drilling process of wells, monitor boreholes, dewatering boreholes, relief boreholes and gas layers and other exploitation projects. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, the penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. Rated Drilling Depth 1000m Borehole Diameter 140~450mm Engine Cummins 6BTA5.9-C180 (132kW) Max. Lifting Force 37T Lifting Force of Small Winch 1.5T Lifting Force of Main Winch 5T Rotation Torque 24500N.m Rotation Rate 0-40/80rpm Feeding Stroke 5340mm Lifting Rate 0-25m/min Height of Centralizer 0.9m Grade Ability 15° Hydraulic Generator (optional) 24kW/380V Flow of Foam Pump (optional) 20L/min Flow of Centrifugal Froth Pump (optional)  / Flow of Plunger Mud Pump (optional)  / Dimension (L x W x H) 9160mm x 2250mm x 3340mm Working Size (W x H) 3250mm x 9900mm Weight 16.5T

Brand: HUANYU Model: HY-50 Drilling depth: 0 - 5- meter Weight: 280KG Hole diameter(Soil): 110-200mm Hole diameter(Rock): 75 - 110mm Can be customized on request Type 50 drilling rig is a high and medium speed drilling rig with hydraulic feed. Compared with other direct drilling rigs, it has the advantages of light weight, simple structure, convenient movement, fast drilling speed, and large core sampling diameter. It is currently common in China Hydraulic drilling rig. Particularly suitable for coring engineering and moving of special difficult terrain such as mountains, hills, rivers, etc. It is also suitable for engineering geological survey of railways, hydropower, transportation, bridges, dam foundations and other buildings; geological core drilling, physical survey, grouting Holes, wells, etc. Weight: 350KG Size(mm): 1400*800*1600 Diesel engine: R180 diesel engine (8 horsepower) This HY-50 type drilling rig is a basic model, suitable for construction, no need to drill tower, directly connected to the drilling tool and drill pipe can be started, easy to operate, more suitable for small-diameter water wells or core use.

Large drilling equipment drilling rig, lifting capacity of 100 tons, can be used for coalbed methane, oil, natural gas extraction, geothermal, 3000 meters deep water well drilling, coal mine rescue, etc. Need fewer workers than ordinary well drilling equipment, convenient relocation, saving expenses, high efficiency high return on investment for a wide range of uses.

Product Name Multi-Stage Telescopic Hydraulic Cylinder Body Material Steel, Alloy Steel Inner Tube Diameter 45-105mm Outer Tube Diameter 110mm Max. Pressure 25Mpa Max. Stroke 3000mm Mounting Type Earring Trunnion, Double Trunnion Surface Treatment Chrome Plating Certificate ISO9001 Package Shrink Film, Pallet, Plywood Case, Carton Warranty 1 year Delivery Time 20-45 days After Service Spare Parts, Online Support, Video Technical Support

PAO 4 - 10 CST Product Uses: The 4-10 CST PAOs are used as synthetic base fluids for high-performance industrial and automotive lubricants (e.g., gear oils, compressor oils, hydraulic fluids, greases, engine oils) and functional fluids (e.g., dielectric, heat transfer, drilling). Almost all products go into lubricant applications.

The rig is able to place casing of 6 meters. Rated Drilling Depth 400m Site Condition Crawler Mounted Telescoping Mast Drill Rig is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes. Product Features JKS400SH Crawler Mounted Telescoping Mast Drill Rig is a new, efficient, multifunctional hydraulic well drilling rig, mainly applicable to the drilling process of well, monitor boreholes and geothermal boreholes. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, the penetration speed being dozens of times quicker than conventional rotation rigs.  More information you can viwe here The rig is able to handle casing size up to 6 meters. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions Hydraulic supporters used facilitate the rig erection on site without crane.  We are Crawler Mounted Drill Rig Supplier and Crawler Mounted Drill Rig Factory  Rated Drilling Depth 400m Borehole Diameter 140~350mm Engine Power 92kW Max. Lifting Force 20T Axial Pressure  ± 8T Lifting Force of Small Winch 1.5T Rotation Torque 8500N.m Rotation Rate 0ï½?40/80rpm

1.The features of KY-150 hydraulic drilling rig KY-150 full hydraulic drilling rig is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds. KY-150 full hydraulic drilling rig has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling. KY-150 full hydraulic drilling rig uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling.

1. Characteristic of XY-8 hydraulic drilling rig Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card. Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. The rig adopts vertical shaft instead of the traditional hexagonal vertical shaft, exponentially increasing gyrator transmission efficiency and carrying capacity . And new spindle shaft has big hole diameter (96 mm), with twin cylinder hydraulic feed the trip is much longer (up to 1000mm), especially suitable for large diameter drill pipe wireline coring, help to improve drilling efficiency and reduce the hole accident. Light weight and can be disassembled to many parts, net weight 6500Kg. The chuck is hydraulic-release normally closed hydraulic chuck, new structure, good compensatory. Carbide inset&welded slip structure, has large clamping force, long life, reliable operation. With water brake, in deep hole drilling, its safer and more smooth to put down the drill pipe. hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents Advanced and compact structure, reasonable layout, all components are revealed outside, do not overlap, ease of maintenance, maintenance and repair. The rig has a low center of gravity and long backward stroke (up to 530mm). Easy to be fixed on tower base, the rig has good stability in high-speed drilling. With shockproof meter, its easy to observe hole situation. Control-handles are in reasonable layout, operation is flexible and reliable.

1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm. Item Unit Parameters XWDF-15 crawler rotary pile drilling rig with square power rod Working mode cylinder pressure wire rope deadweight Drilling hole diameter mm 500-1500 Drilling hole depth m 15 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 13 Maximum torque of power head kn.m 26000 Power head rotating speed r/min 20-40 Turntable rotation angle Full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in Weifang Engine power kw 145

Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations

TAIYE370-DTH hydraulic drilling rig is equipped with new powerful hydraulic powered rotary head and propulsion system, robust chassis and reliable brake system, featuring simple operation, high safety, excellent power, and dust collection solutions. It is developed with the aim to maximally reduce the boring cost while maintaining high performance. ®Techenical parameters Depth :100 meters Drilling hole                   90-135mm Grade ability                   35ºC Turning  speed                 0-76rpm Fuel capacity                  125L The drilling rig product is widely used in the open-pit blasthole drilling and underwater blasthole drilling projects for metallurgy, mining, building materials, railroad construction, hydropower projects, national defense, earthmoving work, etc.

TAIYE370-DTH hydraulic drilling rig is equipped with new powerful hydraulic powered rotary head and propulsion system, robust chassis and reliable brake system, featuring simple operation, high safety, excellent power, and dust collection solutions. It is developed with the aim to maximally reduce the boring cost while maintaining high performance. ®Techenical parameters Depth :100 meters Drilling hole                   90-135mm Grade ability                   35ºC Turning  speed                 0-76rpm Fuel capacity                  125L The drilling rig product is widely used in the open-pit blasthole drilling and underwater blasthole drilling projects for metallurgy, mining, building materials, railroad construction, hydropower projects, national defense, earthmoving work, etc.

Model af series Pull force 5700-45000kgs Rope speed 0- 83m/min Special features: Two-or three-stage planetary gearboxes, smooth operation and reasonable structure. Normally closed friction type brake, high braking torque, safe and reliable operating. Small volume, compact structure and high transmission efficiency. Axial fixed or variable hydraulic motor with long life operating. Mounting frame is available on request. Balance valve, shuttle valve, limit switch and other accessories are also available on request. Application: Af series high-power hoisting winches are widely used in ship crane, harbor, petroleum, drill machine, engineering machinery, geological exploration and construction machinery. It is the best choice for those situations which requires large power, high speed and high security Wooden box, poly bag