Large drilling equipment drilling rig, lifting capacity of 100 tons, can be used for coalbed methane, oil, natural gas extraction, geothermal, 3000 meters deep water well drilling, coal mine rescue, etc.
Need fewer workers than ordinary well drilling equipment, convenient relocation, saving expenses, high efficiency high return on investment for a wide range of uses.
Manufacture and Supply PHEL Make PDTH-300 REFURBISHED Truck Mounted hydraulically operated DTH drilling rig capable of drilling dia 8â?? by DTH up to the depth of 300 meters. · Sturdy structural channel mast with 15 feet rod handling capacity. · Rotary Head gear box with mud swivel arrangement. · Feed cylinder DIA 140x100x2350mm · Jack cylinder DIA 100x70x610mm · Mast rising cylinder DIA 125x100x800mm · Break out wrench cylinder DIA 80X50x300mm · Airline lubricator · RHGB with Motor · Prime mover through PTO arrangement. Carrier Truck: Refurbished · TATA 6x4. Compressor: Refurbished · Make : ELGI · Maximum Air Flow: 1000CFM. · Maximum Rated Pressure: 275 PSI Drill rods, Digger Hammer Assembly, DTH Button Bits, and RIG operating accessories.
Description: The PDHTR-300 drill rig is ideal for exploration drilling application in Water Well. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-300 rig's flexibility means it can be mounted on single truck version, truck matching the rig to the terrain it will be used. Optional: Multipurpose drill rig (DTH, mud rotary) Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement. Technical Specifications: Prime Mover: Truck Make : Ashok Leyland Model : 2523 Drive : 6 x 4 Gross Vehicle weight : 25 MT Engine Rating : 230 HP @ 2400 rpm Air Compressor Make : ELGI / Atlas Copco Model : 1100/300 CFM : 1100 PSI : 300 (20.8 Bar) Drill Depth Maximum Depth : 300Meters(1000Feet) Rod Handling : 4.5 inch(15Feet) Hole Diameter DTH : 152 â?? 254mm(6"- 10") Rotary: 152 â?? 350mm(6â??-14â??) Mud Pump Make : G&P/ Lakshmi Model : 6â??X6â?? Stroke : 150mm Liner Size : 150mm
Brief description: The PDTHR-450 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-450 rigs flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling Optional: Skid mounting Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves Key specification: Drill HOle Diameter : Dia 8" DTH/ 12 1/4" Rotary Depth : 450 Meters-600 Mtr Optional Carrier : Man/ Ashok Leyland Trucks (6x4 Wheel Drive) Air Compressor : 1200 cfm @ 350 psi Mud Pump : 765 lpm @ 16 Bar Application : Water Well Optional : Skid/Two truck version/Trolley/Crawler
TST-150 truck-mounted drilling rig is the new designed rig used for petroleum, coal and minerals prospecting and sampling in complex terrain formation area. It is mounted on WTC5225TSM 6*6 off-road truck chassis. Power takes from chassis engine. The drilling rig uses hydraulic driving. It can carry out air drilling, mud drilling normal circulation function. Main technical parameters: Max drilling depth Mud drilling: 150m, air drilling: 80m Drilling method Mud drilling, air drilling Drilling tools Drill bits (dia) Ф114mm Drilling pipe (DiaXLength) Ф60�4500mm Power swivel Output torque 3400N.m Output rev. scope 0-160 r/min Pull-up & pull-down system Max pull-up force 32kN Feed rate 0�0.4m/s Max Pull-up rate 1.7m/s Hydraulic system Oil pump rev. 1600r/min Working pressure Rotating 17MPa Pull-down 12MPa Mud pump Pressure 3MPa Flow rate 300L/min Screw air compressor Pressure 1.2 MPa Displacement 12.5 m3/min
Crawler Mounted Versatile Well Drilling Rig Truck Mounted Well Drilling Rig Its smaller size can be adapted to various construction sites. Rated Drilling Depth 300m Application JKS300B Crawler Mounted Versatile Well Drilling Rig is applicable to the drilling process of water wells, monitor wells and geothermal wells, etc. Product Features JKS300B Crawler Mounted Versatile Well Drilling Rig is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells. When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. Winch can lift stuff upwards of 6m, facilitating installing pipes. Hydraulic supporters facilitate the rig erection on site without crane. Smaller size makes it adaptable to various kinds of construction sites. We also provide Truck Mounted Well Drilling Rig ,Airman Air Compressor,Hydraulic Crawler Drills and soon Rated Drilling Depth 300m Borehole Diameter 105-350mm Engine Power 92kW Maximum Lifting Force 15T Small Winch Lifting Force 1.5T Rotation Torque 8500N.m Rotation Rate 0-40/80rpm
Crawler Mounted Versatile Well Drilling Rig Truck Mounted Well Drilling Rig Its smaller size can be adapted to various construction sites. Rated Drilling Depth 300m Application It is applicable to the drilling process of water wells, monitor wells and geothermal wells, etc. Product Features JKS300B crawler mounted versatile well drilling rig is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells. When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. Winch can lift stuff upwards of 6m, facilitating installing pipes. Hydraulic supporters facilitate the rig erection on site without crane. Smaller size makes it adaptable to various kinds of construction sites. Rated Drilling Depth 300m Borehole Diameter 105-350mm Engine Power 92kW Maximum Lifting Force 15T Small Winch Lifting Force 1.5T Rotation Torque 8500N.m Rotation Rate 0-40/80rpm Feeding Stroke 3600mm Lifting Speed 0-18m/min Grade Ability 15° Hydraulic Generator (optional) 24kW/380V Flow of Foam Pump (optional) 20L/min Dimension (L x W x H) 6300mm x 2000mm x 2300mm Working Size (W x H) 3100mm x 6900mm Weight 8.5T
The PDTHR-300 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-300 rigs flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling Optional: Skid mounting Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement Key specification: Drill rod handling : 15 feet (4.5 meter) - 20 feet (6.0 meter) Drilling depth : 1,000 feet (300 meters) Drilling diameter : 6.5 inch (165 mm) - 12.25 inch (311 mm) Pull up force : 11,200 kgf Drill head torque : 600 kg.m Air compressor : 1,100 cfm/300 psi Mud pump : 700 lpm-1,000 lpm Carrier : Truck(Optional: Skid)
Description: 1. SLY500 truck mounted water well drilling rig is designed by our engineers.It is a kind of truck mounted and rotary drilling rig. 2. This rig is a rotary drilling rig with directional circulation,which is equipped with mud pump,It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit. 3. The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients.
Truck Mounted Well Drilling Rig Features JKCS300 truck mounted versatile well drilling rig is a new, efficient and multifunctional hydraulic rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, and grouting holes of cofferdam, dam and reinforced base, as well as drilling of open pit mining, anchor reinforcement project and defense project. The rig equips with powerful hydraulic motor, heavy hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs. Truck Mounted Drilling Rig parameters Specifications of JKCS300 Versatile Well Drilling Rig Borehole Diameter Ï?105-350mm Borehole Drilling Depth 300m Working Air Pressure 1.05-3.05MPa Air Consumption 16-35m³/min Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm Rod Length 3m / 4.5m Grade Ability 15° Winch System ( standard main winch & optional tooling winch) Lifting Force 15t Lifting Height 8m Feed System Axial Pressure ±6t Rotation Torque 4500N.m 8500N.m Rotation Rate 0-80rpm 0-160rpm Weight 8t (excluding vehicle) Dimension (L x W x H) 10500mm x 2480mm x 3050mm (transport) Working Size (L x W x H) 11000mm x 2480mm x 7147mm If you are finding Truck Mounted Drilling Rig Factory, we will be your best choose! We are dedicated to providing our customers with high quality and hightech products.
