2-head packaging machine (also can 4-18head according different capacity choice)
Packaging speed 15bags/min
Bag length 90-320mm
Bag width 80-210mm
Overall weight 400kg
Power 1.8kw/220v
Packaging capacity 20-1000ml
Outer packaging size 820 x1220 x 2500mm
Packaging form Back sealing
This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc.
Performance characteristics:
1. High precision digital sensors enable precise measurement to be achieved instantly.
2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use.
3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging.
4. Four scales work alternately, with fast packaging speed.
5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean.
Host configuration:
This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
The whole machine is in sheet plate welded structure, with enough strength and rigidity.
The structure of 4 vertical shaft and 4 oil cylinders is adopted, to alleviate the stress of synchronous tension bar for a uniform pressure during operation, to ensure the operating precision of machine tool and the precision of the workpiece, and to enhance the service life of machine, with free adjustment of stroke for the gliding block, as well as stable and reliable mechnical stopper and synchronized tension bar.
Electric mode is applied for rear stopper, able for separate adjustments, fitted with digital display and ine-tuning device, easy and quick for regulation.
The whole structure of the hydraulic press brake:
Totally european design, streamlined looking, monoblock, welded steel frame rigid to deflection moment and high tensile with st44 a1 material.
-hreger press brake incorporates estun controls offer not only failsafe
Operation of the vital operations of the machine, but also offer the operator considerable assistance in carrying out the entire bending process.
- high accuracy, high efficiency, simple and convenient operation, good performance.
Machine type:
Press brake, plate press brake
Raw material:
Sheet / plate rolling
Material / metal processed:
Stainless steel
Power:
Hydraulic
Automation:
Automatic, automation
Extra services:
Bending
Certification:
Ce, ce, iso
After-sales service provided:
Engineers available to service machinery overseas
Color:
Customization
Voltage:
220v
Warranty:
One years free
Dimension(l*w*h):
4100*2200*3500
Power(w):
18.5kw
Main features:
1.Totally eu streamlined design, mono block by welding robots & apparatus and stress relief process by annealing treatment.
2.Tma machine engineers utilize parametric 3d solidworks using fem & doe analysis as well as static and mechanism analysis.
3.Adopt integrated hydraulic system, more reliable and easy for maintenance. And the hydraulic system from bosch-rexroth, germany,
4.Mechanical synchronous mechanism and the complex compensation are designed so as to raise the workpieces precision.,
5.The stroke and distance of the backgauge is adjusted by the motor and is well adjusted by hand, the adjustment is displayed by digital meters.
6.Inch, single, continuous operation mode being designed for the machine and reversing and maintain time can be controlled by the time relays.
7.Safe fence and the electric interlocker have been designed for the machine to ensure the operation safety.,
Standard equipment:
1.System intermediate upper clamps with anti wedges
2.Plate support arms
3. Powered depth axis
4. Backstop
5. Light guards
6. Top and bottom tooling,
7. Estun e21 nc control
8. Germany bosch-rexroth hydraulic ,
9. Telemecanique/ schneider electrics
10. Hydraulic and electrical overload protection
11. Squaring arm and front support arms
12. Delta inverter with ball screw and polished rod with 0, 05 mm accuracy.
13. Side guard is standard meeting ce regulations.
Estun e21s nc press brake control system:
1., monochrome lcd box panel.
2., integral factor programmable freely
3., automatic, positioning control
4.Spindle allowance offset
5.Internal time relay
6.Stock counter
7.Backgauge position display, resolution in 0.01mm
The best bending results, you can bend longer and deeper parts with standard wc67y-bend series.
O ring, seal, mechanical seals, seal kits, hydraulic breaker, drilling machinery and construction machinery spare parts and components, crushing and screening spare parts..
5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless.
6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely.
7, Side rail:
1),Two side rail in each side of bed.
2),It can be automatically locked when raising, and each guardrail can bear more than 50KG.
3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient;
4), Equipped with gas spring for easy operation.
5), The steel structure of the guardrail base is welded on the bed to ensure safety.
6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed.
7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed.
8, Casters
1), The four casters use 125mm center control one.
2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg
3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking.
9, Shank board can be adjusted manually by simple steel support for convenience position.
10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board.
11, There are 1 hook in each side for drainage bag.
12, It equipped with manual CPR for emergency treatment.
We are offering natural and alkalized cocoa powder.
Specifications
natural and alkalized cocoa powder 1012
haccp,qs,iso,gmp,kosher
made from ivory coast cocoa beans
cocoa powder is rich in nutrition which has high-calorie fat and abundant protein and carbohydrate. There are a certain amount of alkaloids, theobromine, and caffeine in cocoa powder, the three of which have the function of expanding blood vessels and promoting human blood circulation. So it is very good for the health of human body to eat cocoa products.
With natural cocoa beans as raw material, brown-red solid powder which is produced by processes such as screening, roasting, grinding and basifying, sterilizing, machine pressing, milling and so on by imported hydraulic presser production lines has the natural cocoa fragrance.
According to processing methods and application, cocoa powder can be divided into:
natural cocoa powder-used to produce chocolate,confectionery due to its relative ly low solubility in water. ph value:5.0-5.8
alkalized cocoa powder-applied to almost all kinds of food and beverage to enhance flavors with mellow mouth of feel and high solubility in water. ph value:6.2-7.5
according to the fat content, cocoa powder can be classified into:
General
Bending force 125 tn;
Bending length 3200 mm;
Distance between holes 2580 mm;
Fast down speed 100 mm/s;
Working speed 12 mm/s;
Return speed 75 mm/s;
Max. Openning 385 mm;
Regulation of slider travel 120 mm;
Slider travel 120 mm;
Throat depth 320 mm;
Reposition precision of x axes: 0.15mm
Reposition precision of y axes: 0.15mm
Main equipments:
Hydraulic system: omega;
Pump: gear pump;
Electrics: germany siemens;
O-rings: japanese nok;
Conectors: germay emb;
Ball screw: taiwan hiwin
Line guide rail: taiwan hiwin
Nc controller: italy maper ht072
Other standard equipments:
Segmented upper punch die 1set
Lower die in one piece
Stop fingers 2
Front supporting arms 2
Emergency stop button;
Back, left and right safty fence
Foundation bolts 1set
Toolings 1set (screw driver and spanner)
Manuals and diagram 1book
Product Feature:
1.The C-body design, whole body cast, high rigid.
2. All hydraulic systems, greater pressure, stable and reliable performance.
3. Rod mechanical limit, under pressure stroke adjustable , positioning accuracy 0.02mm.
4. Downward movement with the fast and Feeding speed£¬the fast forward improve work efficiency£»feeding speeds can be adjusted to protect the mold and improve product quality.
5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.
6.Key and Foot Switch two cycle start modes.
7. Under cylinder can be configured to facilitate part to taken out(Optional).
8. Infrared protection can be configured (Optional).
Technical Parameters:
Theoretical output pressure 30KN(3t)
Rated oil pressure 10Mpa
Max stroke 150mm
Max Opening Height 230mm
Throat Depth 140mm
Fast-forward speed 120mm/s
Feeding speed 10~80mm/s
Return speed 110mm/s
The size of the working table 410 X 280mm
The height of the working table 720mm
Size of the mold mounting hole 32mm
Power of motor 2.2kw
Power(3AC,50Hz)380V
Weight 420kg.
Hisman hydraulic CNC press brake machines can be fully configured to meet customer requirements and are designed for increased power, productivity and versatility. The robust construction and advanced technology of our machines ensure reliable operation and perfect repeatability, bending materials ranging from soft brass to chrome molybdenum.
Hisman press brakes are capable of handling diverse demands, increasing productivity while maintaining unwavering reliability. The precision provided by our press brakes is a testament to our commitment to innovation and superior craftsmanship. We provide industry-leading service and support for each of our press brakes.
Press brake is a machine used for bending sheet metal and metal plate, most commonly sheet metal. It forms predetermined bends by clamping the workpiece between a matching top tool and bottom die.
Common press brake applications:
Since press brake machines can be fitted with a wide range of punches and dies, they can be used for almost any sheet or plate metal shaping application. The most common are:
Automotive panels
Airframes
Metal artwork
Furniture
Metal containers
Many other sheet metal forming applications
Almost any sheet or plate metal bending application can be accomplished using a press brake. Press brakes are most often used to produce multiple pieces of the same workpiece for further processing.
Press Brake Machine For Sale
Our Ahxisim press brakes offer a wide range of sizes and configurations, from 3.7 tons up to 22 tons (in tandem) and from 2 to 11 axes, making them ideal for various industrial applications. Each machine is fully customizable to meet specific customer needs, blending enhanced power, productivity, and versatility for maximum efficiency. Built with high-quality materials and cutting-edge technology, our press brakes deliver reliable operation and precise repeatability, enabling the smooth bending of materials from soft brass to durable chrome molybdenum.
With Ahxisim, you can rely on superior precision and robust performance that increase productivity while ensuring long-term reliability. Our press brakes reflect our commitment to innovation and premium craftsmanship, backed by industry-leading customer service and support. Whether for small-scale or large-scale projects, Ahxisim's press brake machines are designed to meet diverse bending requirements, enhancing output while maintaining exceptional precision and reliability.
Innovative modular design: Our press brake machines can be combined with automation modules to create a complete automation system for the entire work process, further increasing the machine's versatility.
Experience: Professional R&D team dedicated to researching cutting-edge technology for customer press brake machines.
Custom solutions: Comprehensive stock of basic tools and solutions modified to customer needs.
High-quality equipment: The key components of Ahxisim bending machines are manufactured in Germany.
After-sales service and support: Original spare parts guarantee full performance and long-term durability. Extensive consulting services for machine operation, programming and maintenance.
