Hydraulic Press

All kings hydraulic we can make with good qualiy.

The range is from 20 tons to 500 tons

* Torsion Arm-to maintain parallelism of press beam. * Motorised mechanical depth stops inside the cylinder with handwheel fine adjustment with read out. * Electrical panel with manual and auto operation. * Remote adjustable working pressure. * Foot pedal. * Easy operation.

Main features: 1.Totally eu streamlined design, mono block by welding robots & apparatus and stress relief process by annealing treatment. 2.Tma machine engineers utilize parametric 3d solidworks using fem & doe analysis as well as static and mechanism analysis. 3.Adopt integrated hydraulic system, more reliable and easy for maintenance. And the hydraulic system from bosch-rexroth, germany, 4.Mechanical synchronous mechanism and the complex compensation are designed so as to raise the workpieces precision.,   5.The stroke and distance of the backgauge is adjusted by the motor and is well adjusted by hand, the adjustment is displayed by digital meters. 6.Inch, single, continuous operation mode being designed for the machine and reversing and maintain time can be controlled by the time relays. 7.Safe fence and the electric interlocker have been designed for the machine to ensure the operation safety.,   Standard equipment: 1.System intermediate upper clamps with anti wedges 2.Plate support arms 3. Powered depth axis 4. Backstop 5. Light guards 6. Top and bottom tooling,   7. Estun e21 nc control 8. Germany bosch-rexroth hydraulic ,   9. Telemecanique/ schneider electrics 10. Hydraulic and electrical overload protection 11. Squaring arm and front support arms 12. Delta inverter with ball screw and polished rod with 0, 05 mm accuracy. 13. Side guard is standard meeting ce regulations. Estun e21s nc press brake control system: 1.,  monochrome lcd box panel. 2.,  integral factor programmable freely 3.,  automatic,  positioning control 4.Spindle allowance offset 5.Internal time relay 6.Stock counter 7.Backgauge position display, resolution in 0.01mm The best bending results,  you can bend longer and deeper parts with standard wc67y-bend series.

Machine Features 1. Cold Press machine, also know as Pre-press machine, is an essential equipment in the production of plywood,blockboard etc. 2. It helps to shorten the cycle time of hot press, and initial shaping of glued veneers. 3. Two working ways for option, one is cylinders on top, another is cylinders downsides. 4. Strict quality control, Good quality NO.1 standard steel plate, Top hydraulic unit system, Wuxi solid cylinders, no oil leakage. Technical Parameter Various pressure:400T/500T/600T even higher is available. Pressing size: 3x6ft, 4x8ft, 5x5ft etc.

Application The machine is applied for modern fashion board,plyboard,flak-board,laminating board.woodbased panel board,furniure manufacture,solid board furniture,speaker box,plastic and wooden mould etc. Cold press for plywood making machine. Cold press machine is the auxiliary in plywood production line, which is used to shorten the cycle time of hot press and improve the quality of plywood before gluing board. Cold press machine belongs to the pressing machine. Cold press machine is mainly used to press the gluing veneer, so that make the initial shape, and then into the hot press machine to press. It is important to improve the quality of plywood, and it is an significant part. Cold press machine in general consists with the rack, fixed beam, moving beam, the plate device, cylinder and hydraulic system, electric control device components. Advantage of our pre-press equipment 1.Easy to operate, reasonable design, stable performance 2.fast and efficient pressing. 3.Emergency safety braking.

1. Internal diameter from 150mm-1500mm 2. Single stroke up to 14 meter. 3. Pressures from 800T-8000T.

General Bending force 125 tn; Bending length 3200 mm; Distance between holes 2580 mm; Fast down speed 100 mm/s; Working speed 12 mm/s; Return speed 75 mm/s; Max. Openning 385 mm; Regulation of slider travel 120 mm; Slider travel 120 mm; Throat depth 320 mm; Reposition precision of x axes: 0.15mm Reposition precision of y axes: 0.15mm Main equipments: Hydraulic system: omega; Pump: gear pump; Electrics: germany siemens; O-rings: japanese nok; Conectors: germay emb; Ball screw: taiwan hiwin Line guide rail: taiwan hiwin Nc controller: italy maper ht072 Other standard equipments: Segmented upper punch die 1set Lower die in one piece Stop fingers 2 Front supporting arms 2 Emergency stop button; Back, left and right safty fence Foundation bolts 1set Toolings 1set (screw driver and spanner) Manuals and diagram 1book Machine type: press brake

Plywood Hot Press machine is one of the main equipments in producing plywood,blockboard, film faced plywood, fancy plywood. 1.The main frame is welded by No.1 national standard steel plate,strong body, high rigidity. 2. Adopt micro computer control system and imported hydraulic units, easy to operate,long working life. 3. Adopt advanced hydraulic pump station and plunger cylinders, featured product--aviation technology low noisy hydarulic pump. 4.Hydraulic control system is made by good quality hydraulic units, fast pressure, accurate press, high efficiency. 5. All the hot platens are made of the best quality steel plate, after solid drilled and fine polished, good thermal conductivity. 6. It has manual and automatic transfer function to meet user's demand. Technial Parameters: 1. Various pressure: 400T/500T/600T/800T/1000Ton and more. 2. Plywood sizes: 1220x2440mm, 915x1830mm etc.