Lifting capacity(t):5t 10t 16/3.2t 20/5t 32/5t 50/10t Working duty:A5-A6 Span(m):18m 22m 26m 30m 35m Lifting height(m):10m 11m, 12m Lifting speed(m/min):2.9-11.4 m/min Power supply:380V 50HZ 3PHS(or according to your demand) Electricals and other parts are packed by high quality plywood crates, Main beam packaged by plastic film and woven plastic cloth.
Voltage: 220V/110V RF frequency: 6MHz RF energy: 0-50J/cm2 Temperature of probe: -2-85íµ Output power: 900W Size: 34í-35í-48cm Weight: 12Kg. There's a bipolar device in the handpiece probe, makes the electric current cycle in it. The great advantage of this setting, is to make uniform energy during the treatment.
Mantall cmp series provide you with duel-control system that you can operate the lift up and down on platform or base.Only mantall can provide You with so humanized design aerial work platform.New mantall cmp series provide you with more safe and more effective working environment.
1. Qtz80 tower crane: rated moment of lifting: 800kn. M, the max lifting weight: 8t, the max range: 56m. 2. Qtz80 tower crane: set lifting height: 45m, can undertake 14-stoery or below buildings, adhesion height 75m and 150m, can undertake 32-story or 50-story or below buildings. 3. Qtz80 tower crane owns two lifting points, level beam, upper rotating, hydraulic lifting, easy for installation and disassembling. 4. Qtz80 tower crane uses rotating motor, light load with high speed and heavy load with low speed, low noise. 5. The qtz80 tower crane adopt the technology of odm series turning framework of potan french, the framework use the advanced electric and electronic technology, electromagnetism coupling and planet reducer infinitely timing, twisting moment large when starting, operate smoothly, advanced function. Exporting packing by container
1. QTZ63(5013)tower crane: Rating moment of lifting: 630KN. M. The max lifting capacity: 6t, the max jib length: 50m; 2. QTZ63(5013)tower crane: Fixed lifting height: 39-40.5m, can undertake 13-story or below buildings; Adhesion height 140m, can undertake 45-story or below buildings. 3. QTZ63(5013)tower crane owns two lifting points, level beam, upper rotating, hydraulic lifting, easy for installation and disassembling. 4. QTZ63(5013)6t tower crane use special motor and lows electric shock and ensure the leveling and stability. The QTZ63(5013)6t tower crane can also use three speeds motor. 5. The QTZ63(5013)tower crane adopt the technology of ODM series turning framework of POTAN French, the framework use the advanced electric and electronic technology, electromagnetism coupling and planet reducer infinitely timing, twisting moment large when starting, operate smoothly, advanced function. item Metric lifting moment KN.M 630 Max. lifting capacity T 6 Tip load capacity T 1.3 Working radius M 2.5~50 Hoisting height Independent M 40.5 Attachment M 120 Hoisting speed fall 2 4 Hoisting speed M/min 8.4 40 80 4.2 20 40 Max lifting capacity T 3 3 1.3 6 6 3 Slewing speed R/min 0.61 Trolleying speed M/min 21/42 Climbing speed M/min 0.5 Weight Independent structure T 31 Counter-balance T 12 Stationary structure T 35 Max. slewing radius M 51.43 Counter-jib slewing radius M 13.58 Max. working wind speed M/s 20 Climbing wind speed í_ M/s 13 Working environment temperature Degree -20~+40
Mantall amp portable aerial work platforms safely reach working heights of up to 14m. The unique mast design gives your more safe environment and Easy conveyance. Only mantall can provide the models up to 12m roll easily Through standard doorways without being titled back. The amp series offers you duel-control system that you can operate the lift up and down on platform or base.Mantall rigid adherence to manufactory, safe and test standards Of the aerial work platforms.
MW5 series electric lifting magnet | Series Electromagnetic Separators Product Description Lifting Electromagnet for Steel Scraps Introduction: Electromagnet is used for transporting iron scraps,ingots,steel chips,slabs,steel plates and steel sheets.Electromagnet is suitable for installing on excavator,crane;and electromagnet also can be submerged under water,can be used at very high temperature and normal temperature in metallurgical plants,scrap yards and ship-building plants. Options: Rated Voltage DC220V;Strong Excitation Type;Overexcitation type. Consists of Lifting Magnet, Cable Reel,Control Cabinet, Cable Connector. · Lifting Magnet:MW5-130L/1 · Rectification Control Cabinet:DKP-4 · Cable Reel:JTA100-15-2 · Quick Coupling:DKL-50 Features: 1ã??a unique magnetic circuit design, use of aluminum coil,coil plates used to protect the good wear resistance of high manganese boards, light forces,the lifting capacity. 2ã??the structure is simple,sfe,reliable,applicable to all types of lifting equipment. 3ã??with the exception of the use of voltage,but also a strong exciting waay.Can improve the lifting capacity and increase economic efficiency. 4ã??applicable to the removal of cast iron ingots,Steel Ball into all kind of scrap. 75% or 60% Duty Cycle All welded heavy duty construction Class H insulation Powerful deep magnetic field design Aluminum Coil , Copper optional ShenGang produces the following types of magnets: · (Circular/Square/Rectangular), available diameters from 500 mm up to 3000 mm; · Heat insulated magnets.They are used to move hot cargoes having surface temperature of up to 700°C; · Magnets for any climatic requirements; · Magnets with up to 75% duty ratio;
Jiglift offers a complete range of durable scissor lifts with lifting capacities ranging from 2, 800 kg to 5, 000 kg. Our rugged car and truck lifts are designed to handle all of your vehicle lifting applications. We know you demand uncompromising quality from productive lifts that maximize up-time and get the job done efficiently. That why, day after day, our rugged scissor lift deliver on a promise of superior performance that our clients have come to expect from jiglift. Standard export packing
This timber crane arm is outward folding structure, installed on all kinds of single model for timber and log transport vehicles. The crane has simple structure, small size, large torque, high strength, and strong operating performance. It can achieve the purpose of quick loading and unloading timber. Hydraulic grabs and other components can use imported configuration. New products series also developed a remote control and industrial wireless control for optional, which improves the safety of personnel. Main technical specifications Max lifting moment m8 +min operating amplitude mm3000 +max operating amplitude mm7600 +max lifting height mm13.650 Rotation range 400 Amplitude range -23~80 Max rated lifting capacity kg 2500 Installation space m1.5 Max pressure of hydraulic system mpa31.5 Max oil flow of hydraulic systeml/min 80~110 Recommend power needed at recommend oil flow kw37 Weight (no grab)kg 1830
Fq series floating crane is the lead of products in our corporation. Which is a crane of fixed slewing support structure. Their pedestal is fixed on ships. Fq series floating crane is suitable to load and unload cargoes on ships. Their lifting capacity can be from 3ton to 50ton or more. Capable of handing with hook or grab. The crane adopts horizontal displacement compensator of block and slewing ring with fixed column. It's main features are simple in structure, light in weight, little in cost, less area against wind, easy assembly and maintenance. The slewing mechanisms offers slewing of 360¡ã. The hoisting, slewing, luffing mechanisms be operated individually or jointly. The slewing support structure of the crane adopts ball bearings type. The driving unit of slewing structure consists of vertical motor, planetary gear trunk, big gear ring ect. The limit moment coupling against accidental knock when the crane is slewing. The crane is equipped with various safety devices and safe work can be ensured. Suitable package
Fq series floating crane is the lead of products in our corporation. Which is a crane of fixed slewing support structure. Their pedestal is fixed on ships. Fq series floating crane is suitable to load and unload cargoes on ships. Their lifting capacity can be from 3ton to 50ton or more. Capable of handing with hook or grab. The crane adopts horizontal displacement compensator of block and slewing ring with fixed column. It's main features are simple in structure, light in weight, little in cost, less area against wind, easy assembly and maintenance. The slewing mechanisms offers slewing of 360¡ã. The hoisting, slewing, luffing mechanisms be operated individually or jointly. The slewing support structure of the crane adopts ball bearings type. The driving unit of slewing structure consists of vertical motor, planetary gear trunk, big gear ring ect. The limit moment coupling against accidental knock when the crane is slewing. The crane is equipped with various safety devices and safe work can be ensured. Suitable package
Ggq series fixed crane is the lead of products in our corporation. Which is a crane of fixed slewing support structure. Their pedestal is fixed in ports or harbors.Hgq series floating crane is suitable to load and unload cargoes in ports or harbors and cargoes yards. Their lifting capacity can be from 3ton to 50ton or more. Capable of handing with hook or grab. The crane adopts horizontal displacement compensator of block and slewing ring with fixed column. It's main features are simple in structure, light in weight, little in cost, less area against wind, easy assembly and maintenance. The slewing mechanisms offers slewing of 360¡ã. The hoisting, slewing, luffing mechanisms be operated individually or jointly. The slewing support structure of the crane adopts ball bearings type. The driving unit of slewing structure consists of vertical motor, planetary gear trunk, big gear ring ect. The limit moment coupling against accidental knock when the crane is slewing. The crane is equipped with various safety devices and safe work can be ensured. Suitable package
Hgq series floating crane is the lead of products in our corporation. Which is a crane of fixed slewing support structure. Their pedestal is fixed in ports or harbors.Hgq series floating crane is suitable to load and unload cargoes in ports or harbors and cargoes yards. Their lifting capacity can be from 3ton to 50ton or more. Capable of handing with hook or grab. The crane adopts horizontal displacement compensator of block and slewing ring with fixed column. It's main features are simple in structure, light in weight, little in cost, less area against wind, easy assembly and maintenance. The slewing mechanisms offers slewing of 360¡ã. The hoisting, slewing, luffing mechanisms be operated individually or jointly. The slewing support structure of the crane adopts ball bearings type. The driving unit of slewing structure consists of vertical motor, planetary gear trunk, big gear ring ect. The limit moment coupling against accidental knock when the crane is slewing. The crane is equipped with various safety devices and safe work can be ensured. Suitable packages
Eco series 4-post lifts represent the very best in-class construction, materials, technology and safety, with exclusive features that youll wonder how you ever lived without them. Favored both by professional automotive garages and dedicated diy our four-post lifts are some of the most versatile in existence. Our fpl/fpa series lifts are optimized for performance, featuring unprecedented safety and control, advanced hydraulic systems for enhanced productivity and extended operation even when used for the most demanding applications. Standard export packing
Jiglift offers a complete range of durable two-post lifts with lifting capacities ranging from 3, 200 kg to 7, 000 kg. Our rugged car and truck lifts are designed to handle all of your vehicle lifting applications. We know you demand uncompromising quality from productive lifts that maximize up-time and get the job done efficiently. That why, day after day, our rugged 2-post lifts deliver on a promise of superior performance that our clients have come to expect?from jiglift. Standard export packing
Whether you the owner of a public parking structure or just want to make the most out of your private garage, jig has a selection of premium parking lifts to truly maximize your work space. We offer both two-post lift, four-post lift and tilting parking lift configurations with the smallest footprints possible. As with every jig product, safety and durability are our primary concern, therefor, these rugged, compact parking lifts feature automatically engaging spring-actuated locks, plenty of hard-working muscle for busy garages and ergonomic operator controls for superior ease-of use. This equipment can make parking spaces doubled, easy to operate, economical and without special requirements for the ground. It is safe and reliable equipped with multiple safety protection devices, with high-quality steel and advanced metal spraying anti-corrosion treatment (aluminum spaying), the equipment can achieve anti-corrosion performance up to over 35 years. It can be widely used in enterprises, public institutions and families in residential areas. All the design elements make the machine more easier to operate and more humanized. Standard export packing
Its operation is similar to the elevator, low area coverage and high usage rate of space; by adopting intelligent radar control system , it can achieve steady operation, fast speed operation, and high security performance. By adopting plc control, it can achieve simple and fast parking and releasing with high automatic functions in the whole process. Standard export packing
Minimize your waste of time, space and money Carries up to 150kg Eliminates all heavy lifting Stainless steel lifting plate Made of a powder-coated steel frame Multi-directional wheel base Easy transportation of compacted waste The Mil-tek Lift Trolley is the ideal assistant for a Mil-tek X-Press Compactor, eliminating any heavy lifting and making transportation of the finished waste bag both safe and easy. Instead of carrying bags to and from a skip/bin, compacted bags are simply wheeled out, winched up and pushed off. The lifting plate is manufactured from stainless steel, in order to avoid corrosion and minimize wear when used in hostile and onerous environments. The Lift Trolley is suitable for use with all XP model compactors and can also be used to transport small/medium sized bales of plastic and cardboard. Specifications Height (mm) : 1743 Width (mm) : 581 Depth (mm) : 778 Max. Lifting Height (mm) : 1400 Net. Weight (kg) : 50 Max. Lifting Weight (kg) : 150 Approved : CE PRICE : 845.00 E
For loads difficult to access, or where loads are to be lifted, in which actually working on the load itself in not practical, we recommend our EX jack series for operation with a hydraulic hand pump. Equipped with our one-hand precision cast safety toe.
This blender series is similar to the three leaves advancing blender,and it is the axis-streaming blender.Its characteristics is wich large recycling capability,small power consumption,and good cutting strength,so it is used widely in many situations.It is mainly used in the operation process of mixing in low viscosity,melting,suspending,crystallizing,reacting,heat passing,diluting,conciliating and etc.condition is �¼
