APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Quick Details Type:Rapeseed Oil Product Type:Nut & Seed Oil Processing Type:Refined Refined Type:Hydrogenated Oil Cultivation Type:Organic Packaging:Bulk, Can (Tinned), DRUM, Gift Packing, Glass Bottle, Mason Jar, Plastic Bottle, Vacuum Pack Purity (%):100 Grade:A Volume (L):5 Brand Name:Refined Canola Oil Model Number:Refined Canola Oil High Quality 100% Refined Canola Oil:Cooking Oil Product name: Rapeseed Oil Canola Oil:100% Refined Rapeseed Oil:100% Refined Rapeseed Cooking Oil Keywords:Canola Food Oil Use:Cooking Food Quality:100% Nature Application:Home Cooking Sunflower Meal Protein: 35.5% Min Fiber: 21% Max Moist: 12% Max Fat: 2.0% Max Packaging Plastic Bottle, Bulk, Can (Tinned), Drum, Flexi tank in transparent PET bottle----1L, 2L, 3L, 4L and 5L (With Handle). In jerry can---- 5L, 10L, 20L, 25L and 220L. In metal tin----16L, 14kg (with or without carton), 15L /15 kg, 16 kg (with or without carton), 17L/17kg, 18L /18 kg, 20L metal tin with bung hole (Round or Square) In metal drum---- 200L In flexi tank---- 20MT/20 FCL Buyer makes 40% T/T deposit upon signed Proforma Invoice. 30% T/T against full shipping document. Then a balance of 30% T/T to be paid upon confirmation of the arrival of goods at buyers destination port.
style 1: min. 90% of whole kernel above 17 mm; of which 15% >20mm; style 2: min. 50% of whole kernel above 17 mm, and 50% of halves; style 3: min. 15% of whole kernel and premium halves above 14mm; style 4: min. 80% of halves between 9 and 15mm; less than 5% of wholes over 10mm; style 6: premium pieces above 9mm. - > other grades and styles may be available or produced to your needs on request. packaging and shipping: - > average moisture: 1. 5% - > oxygen level: maximum of 3% of oxygen must be respected, in order to better preserve its content. - > shelf life: raw kernel 18 months
style 1: min. 90% of whole kernel above 17 mm; of which 15% >20mm; style 2: min. 50% of whole kernel above 17 mm, and 50% of halves; style 3: min. 15% of whole kernel and premium halves above 14mm; style 4: min. 80% of halves between 9 and 15mm; less than 5% of wholes over 10mm; style 6: premium pieces above 9mm. - > other grades and styles may be available or produced to your needs on request. packaging and shipping: - > average moisture: 1. 5% - > oxygen level: maximum of 3% of oxygen must be respected, in order to better preserve its content. - > shelf life: raw kernel 18 months
Ferrous glycine is used widely as third-generation organic iron at present. Nutritionists unanimously recognize it is absorpt quickly in the animal intestinal tract, higher utilization rate, with good functions of blood-producing and oxygen-carrying. After the organism absorb ferrous glycine, can convert into more heme rapidly. Ferrous glycine has a outstanding effect for improving animal fur and growth performance Light yellow crystal or crystalline powder
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
General introduction 1)Unsalted Cow Milk Butter 82% (25kg) 2)Creamy yellow to yellowish white 3)Natural milk fragrance. 4)Delicious taste. PHYSICAL AND CHEMICAL ANALYSIS Milkfat 82.0 % min. Moisture 16.0 % max. Nonfat Milk Solids 2.0 % approx. pH 4.5 5.5 Taste and Odour Pleasant, clean, creamy Colour Uniform, pale yellowish MICROBIOLOGICAL ANALYSIS Total Plate Count 30,000 / g max. Coliforms Negative in 0.1 g Salmonella Negative in 25 g Yeast & Mould 100 / g max. Antibiotics Negative
General introduction 1)Unsalted Cow Milk Butter 82% (25kg) 2)Creamy yellow to yellowish white 3)Natural milk fragrance. 4)Delicious taste. PHYSICAL AND CHEMICAL ANALYSIS Milkfat 82.0 % min. Moisture 16.0 % max. Nonfat Milk Solids 2.0 % approx. pH 4.5 5.5 Taste and Odour Pleasant, clean, creamy Colour Uniform, pale yellowish MICROBIOLOGICAL ANALYSIS Total Plate Count 30,000 / g max. Coliforms Negative in 0.1 g Salmonella Negative in 25 g Yeast & Mould 100 / g max. Antibiotics Negative
Rapeseed meal Rapeseed meal is the by-product of the extraction of oil from rapeseed . It is a protein-rich ingredient that is widely used to feed all classes of livestock and poultry. The rapeseed meal is a valuable source of premium quality feed protein with a well-balanced amino acid supply and is high in general nutrient value. Rapeseed meal, also called canola meal, is the by-product of the extraction of rapeseed oil. Protein %(Min.) 37 Moisture %(Mix.) 10 Acid Ins. Ash %(Mix.) 2.5 Fiber %(Mix.) 10 Fat % (Max.) 1.2
General Description of Potassium-hydroxide: CAS :1310--58--3 Strong alkaline white solid or colorless liquid products, Ion-Exchange Membrane process. Main Applications of Potassium-hydroxide : It is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium-permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation,de-sulfuration in petroleum refining, bio-fuel and alkaline battery.
Name: Arugula seeds Name in general: watercress Arugula Botanical name: Eruca sativa Family: Brassicaceae Origin: Egypt Purity: Sortex 98% min Germination: 75% min. Certificate: ISTA HS Code: 120991
Name: Arugula seeds Name in general: watercress Arugula Botanical name: Eruca sativa Family: Brassicaceae Arugula or (Eruca sativa) has many names such as rucola, rucoli, rugula, colewort, and roquette and rocket salad. Origin: Egypt Purity: Sortex 98% min Germination: 80% min. Certificate: ISTA HS Code: 12099100
