We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Wheat (food grade, for human) origin Ukraine high protein protein not less 13% clean in pp bags 25/50/1000 kg
Sunflower seeds for making oil origin Ukraine high fat content 55,7 % Humidity % not more 6.5 Oil admixture% not more 7.0 Trash admixture % not more 2.8 Mass fraction of oil in terms of dry matter % no less than 55.91 Acid number of oil mg KOH/g % not more 2.51 packed in pp bags 25/50/1000 kg
New Technology for Sleep -Enjoy high-quality sleep with the help of technology. Safety Material - Our hypoallergenic blankets use soft, skin-friendly, and breathable 100% natural fabric as the outermost layer in close contact with the skin. Our glass beads are safe, non-toxic, and environmentally friendly. Fine Craftsmanship - Advanced processes upgraded the stitched squares to smaller and denser pockets, glass beads evenly distributed inside create a unified distribution of weight instead of sinking to the side/corner. Delicate stitching prevents glass beads from leaking through the seam.
Hardwood and softwood logs usa and canada souther yellow pine logs, eastern white pine logs walnut logs, red oak logs, cherry logs, african teak logs & various other specie lumber sd and kd, syp lumber , ewp lumber lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood mdf: china ,thailand ,malaysia plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam shuttering plywood solid chipboard, particular board and osb board doors and frames.
Product Description Relying on our expertise in this domain, we are into offering High-Temperature Vacuum Furnace. A High temperature vacuum furnace is a type of furnace in which the product in the furnace is surrounded by a vacuum during processing. 3 chamber Vacuum furnaces are used to carry out processes such as annealing, brazing, sintering and heat treatment with high consistency and low contamination. Vacuum furnaces are used in a wide range of applications in both production industries and research laboratories. The absence of air or other gases prevents oxidation, heat loss from the product through convection, and removes a source of contamination. This enables the furnace to heat materials (typically metals and ceramics) to temperatures as high as 3,000 �°C (5,432 �°F) with select materials. Features: Consistency performance User-friendly design Easy and accurate clamping
The high quality bulgarian rose oil gained its producers scores of medals and diplomas from many exhibitions and fairs. The rose valley in bulgaria, near the town of kazanlak, is among the major producers of attar of roses in the world. Thanks to the specific geographic and climate conditions favorable temperatures during february, when blossoming buds formed, the maroon forest soils and frequency of the rainfalls during the rose picking in may and june, more than 3 centuries had been cultivated the famous all over the world bulgarian oil rose. This rose is used for producing the incomparable bulgarian rose attar.
Fly ash, granulated iron blast furnace slag (gbfs), potassium feldspar , sodium feldspar , stpp sodium tripolyphosphate, zirconium silicates & zirconium flours.
ROSE PEARLS is a GMO-free, natural product made of high-quality organic Rose Damascena oil from Bulgaria. Rose Damascena, also known to the world as the Oil giving Rose from Kazanlak, is the queen of flowers and the Rose valley in Bulgaria has become her kingdom. Our rose plantations are located in to the village of Skobelevo - in the heart of Bulgaria, an ecologically clean area at the foot of the Balkan Mountains. In order to extract the essential ingredients of roses, our company Alba Grups uses water-steam technology, a technology with tradition in distillation. We use no chemicals in our process. Hundreds of rose petals are needed to extract just one drop of rose oil. For a kilogram of rose oil we need about 4 tons of rose petals, nearly 1,660,000 freshly picked roses. Rose flowers are handpicked very early in the morning and are processed as fast as possible to keep the high quality of the oil. This makes it one of the most expensive essential oils in the world. Its quality, how it is used, and the way it benefits the body have been known to the world for centuries. Rose Pearls capsules are a food supplement and benefit the digestive and urinary system. They help strengthen and bring the bodies systems into harmony, including the respiratory, reproductive and immune systems. Only three pearls a day will make you feel healthy, alive and energetic.
Salvia essential oil ( or sage essential oil) is great for relieving grief and quickening the senses, while stimulating the lymphatic system and helping with female problems, such as sterility and menopausal problems and on the skin it not only helps healing but also to reduce pore size. Oil properties Salvia oil has a sharp, herbal smell, and is watery in viscosity. Origin of salvia oil It is an evergreen perennial herb that can grow up to about 60cm ( 2 feet) high with a woody base, soft grey-green oval leaves and a mass of blue or violet flowers. The Chinese believed that it cured sterility, while the romans believed it cured just about everything.
-1400°c, 1500°c or 1600°c maximum operating temperature -carbolite gero 301 controller, with single ramp to set-point & process timer -3, 8, 15 or 35 litre chamber volumes -soft closing parallel action door (3 & 8 litre models only) -silicon carbide heating elements provide long life and are able to withstand the stresses of intermittent operation -rhf 3 & 8 litre have a cast alumina hearth; rhf 15 & 35 have silicon carbide hearth -low thermal mass insulation for high energy efficiency
The most powerful commercial condensing boiler in the world, the E-Compact Twist is available in a wide range of outputs of 25kW up to 150kW, and is ideal for business owners who are looking to run a more energy-efficient business. The only condensing pellet boiler in the world with a single heat exchanger, the E-Compact Twist condensing boiler can achieve efficiencies of up to 103%.
Analytical Chemistry: A muffle furnace can be used for sample pretreatment in analytical chemistry, such as ashing, combustion, and thermal decomposition of inorganic substances. They can also be used for the pyrolysis, dissolution, and removal of organic substances. Coal quality analysis: used for measuring moisture, ash content, volatile matter content, ash melting point analysis, ash composition analysis, elemental analysis, and can also be used as a universal ashing furnace. Ore smelting: In metallurgy and ore processing, muffle furnaces are used for sintering, reduction, and smelting of ores. They can provide a high-temperature environment to melt or undergo chemical reactions in the ore. Ceramic technology: In ceramic manufacturing, muffle furnaces are widely used for sintering ceramic products, such as ceramic billets, ceramic coatings, and ceramic fibers.
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Lead slag produced from rotary furnace lead percentage is 20 to 25%
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
