***MADE FROM 100% NATURAL WOODEN*** 1.Heat Resistant Spoons-Long and comfortable handles make these cooking spoons easy to hold when stirring food for a long time and protect your hands from the heat of your dish. 2.Easy to Clean & Store-A wood spoon is easily cleaned with warm soapy water. You can easily store this wooden utensil set in a drawer or spoon holder, or hang it on the wall. 3.Great for Crafts and Decoration-A great choice for sending mom, women, and chefs for housewarming, birthday, Christmas and more special occasions as our wood utensils set will be useful in every kitchen. It's the best tool to gift your loved ones who spend time in the kitchen to see happy smiles of family. Time to give them a decor set which will decorate their kitchen with an elegant look!
Construction equipment (home improvement, electrical supply, pipes and fitting etc..), heavy machinery: mining equipment, excavator, drilling, and so on paper and packaging, production line: kraft paper, plastic and paper box, aluminum foil, plastic wrap, boxes, paper cups, take a way box and so on.. renewable energy: solar panels, inverter, photovoltaic chemical and raw material: soda ash, titanium, pe, ppe .Our company hangzhou xing ying technology co., ltd.(astrioglobal) also provides exporting, quality control, international logistics and consulting/negotiation.
Rubber Ceramic Wear Plate is different from ordinary ceramic tiles,the Ceramic-rubber plate with the special process treatment changes the ceramic mechanism of easy breakage. With the characteristic of shock absorption of natural rubber, the impact-resistant performance of ceramic will be highly improved which is more than 10 times of ordinary ceramic tiles. Wear ceramic liner have effective noise reduction when processing materials handling .Chemshun ceramics can customized the ceramics and rubber thickness and shape for various conveying equipment .normal size is 300*300mm 500*500mm vulcanized by cylinder , hexagonal tile mat, alumina ceramic plate,square alumina mosaic etc. Products Characters High hardness Superior abrasion and impact resistance Corrosion and chemical resistance Light weight Easy installation by epoxy resin or bolt Improve your working environment-noise, vibration and safety Chemshun wear ceramic liner size : (Length* width * thickness) 300*300*63 mm 500*500*30 mm 300*300*25 mm Note : customized size available according to customer’s requirement
4 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 9 mm, 10 mm and 12 mm, A wide range of paper straw selections, with selected FSC paper, food safe grade ink, and heat resisted glue
Valor is capable of manufacturing anti-wear lining pipes, elbows, cyclone devices, valves and other equipment components. Pipelines and equipment parts are machining according to customer required geometry shapes, flanges as well as the selected connecting parts. All the linings can achieve effective wear-resistant protection for the grinding
Refractory bricks, high alumina bricks, fire clay bricks, sk 34 fire bricks, sk 36 fire bricks, acid resistance bricks,insulating bricks, hfk bricks, cfi bricks, special shaped refractory burner block, refractory tiles, refractory tundish well blocks, refractory nozzle, refractory castables, medium purity high purity castables, low cements castables, refractory mortar, refractory cements, ceramics fiber blankets, ceramics fiber boards, crushed refractory bed materials, bottom pouring sets.
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
We are exporter of Calcined Alumina. According to different requirements, five series of products have been formed, including dry pressing, hot die casting, refractory, casting and setting, structural ceramic granulator, etc. It can be widely used in electronic equipment, structural ceramics, refractories, wear-resistant materials, polishing materials and other industries.
StaThick-TS-CWS-E1414 is a modified, Vegan, Gluten-Free, Plantbased, Non-GMO starch used a Emulsifier, Binder, Stabilizer and Thickener in Instant food products and various sauces and gravies. This product has good resistance to heat and shear. It's stable to conservation and resistant to freezing
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Improve Low temp Stability, Excellent Resistance to High Heat, Mechanical Shear & Low pH FEATURES: �¯?�· Improved Low-Temperature Stability �¯?�· Excellent Resistance to High Heat �¯?�· Mechanical Shear & Low pH APPLICATIONS: * Canned foods * Frozen Foods * Baked Foods * Soy Sauce, Ketchup & Chilli Sauce * Gravies * Yoghurt, Jelly, Pudding * Meat Ball * Fish Ball STORAGE Exhibits excellent stability when stored in a cool and dry ventilated place. Avoid direct sunlight.
StaThick-MS-CWS-E1414 is a modified, Vegan, Gluten-Free, Plant-based, Non-GMO, Cold Water Soluble starch used as a Emulsifier, Binder, Stabilizer and Thickener in Instant food products and various mayonnaise, sauces and gravies. This product has good resistance to heat and shear. It's stable to conservation and resistant to freezing. The special property of StaThick-MS-CWS-E1414 starch is its large water binding and fat binding capacities.
StaThick-MS-CWS-E1414 is a modified, Vegan, Gluten-Free, Plantbased, Non-GMO, Cold Water Soluble starch used as a Emulsifier, Binder, Stabilizer and Thickener in Instant food products and various mayonnaise, sauces and gravies. This product has good resistance to heat and shear. It's stable to conservation and resistant to freezing. The special property of StaThick-MS-CWS-E1414 starch is its large water binding and fat binding Capacities.
StaThick-MS-CWS-E1414 is a modified, Vegan, Gluten-Free, Plant-based, Non-GMO, Cold Water Soluble starch used as a Emulsifier, Binder, Stabilizer and Thickener in Instant food products and various mayonnaise, sauces and gravies. This product has good resistance to heat and shear. It's stable to conservation and resistant to freezing. The special property of StaThick-MS-CWS-E1414 starch is its large water binding and fat binding capacities.
StaThick-TS-CWS-E1414 is a modified, Vegan, Gluten-Free, Plantbased, Non-GMO starch used a Emulsifier, Binder, Stabilizer and Thickener in Instant food products and various sauces and gravies. This product has good resistance to heat and shear. It's stable to conservation and resistant to freezing. The special property of StaThick-TS-CWS-E1414 starch is its large water binding and fat binding capacities.
Ceramic tiles are durable and versatile, made from natural clay and fired at high temperatures to create a hard, stain-resistant surface. Available in a variety of designs and colors, they are ideal for floors, walls, and countertops. Easy to clean and maintain, ceramic tiles are a practical and environmentally friendly choice for residential and commercial spaces.
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�?�°C to 1250�?�°C with a boiling point of 2355�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
